Conroe-L >>> a.k.a. Intel Celeron 460ES Socket 775 >>> AMD Killlaaaar >>> SS rotary

Hardware Used:
Intel S775 Celeron460ES (single core) aka Conroe-L (thanks to wwwww for the CPU...still trying to kill it mate but not with much success :D)
Gigabyte 680i rev2 (FA bios stock)
Corsair PC10000 Dominator 2GB Kit
SS Blackbox Phase Change (finally blown off the cobwebs :D) R290 from barbacue bottle :D
PCI MX400 Nvidia GFX card
60GB Maxtor IDE Drive
Corsair HX620 620W PSU

Ambients around 19-23C

I was too lazy to install the OS again so i just used the XFX 680i mobo install and it was a bit farked up and it kept freezing in windows so i booted safe mode and ran diagnostics windows setup :D and it worked sooooo here we go


http://img207.imageshack.us/img207/8...ideshotll6.jpghttp://img294.imageshack.us/img294/1...picaboodx7.jpg
http://img469.imageshack.us/img469/7...ideviewkh1.jpghttp://img178.imageshack.us/img178/2...espreadha5.jpg
http://img464.imageshack.us/img464/7...nandicegv0.jpg
http://img341.imageshack.us/img341/3...wattagehu9.jpg.........http://img180.imageshack.us/img180/4...andevappe8.jpg

HAHAHAH THE TEMP SENSOR IS A JOKE HEHEHE -78C hahaha

DID YOU GUYS SEE THE ICE AROUND THE SOCKET AND AROUND EVAP EEK


SuperPi 1M

http://img237.imageshack.us/img237/3...i17969spa7.png

http://img530.imageshack.us/img530/8...i17500sxm3.png

http://img528.imageshack.us/img528/2...i17407ssw5.png

http://img295.imageshack.us/img295/5...i17672sob8.png






SuperPi 32M

http://img525.imageshack.us/img525/2...superpiem7.png

http://img296.imageshack.us/img296/8...i17mfladt7.png

http://img172.imageshack.us/img172/6...i16m42sxf7.png

http://img456.imageshack.us/img456/8...i16m37szp8.png




wPrime 32M & 1024M

http://img510.imageshack.us/img510/9...mwprimepd8.png

http://img296.imageshack.us/img296/5...primebiei3.png

:up:

They better release AMD CPUs capable of beating at least these things :D

Looking really good, that chip is sweet, going to try it on a p35 board? :D.

Keep pushing it.

Quote:

---

Originally Posted by Oliver

Looking really good, that chip is sweet, going to try it on a p35 board? :D.

Keep pushing it.

---

haha thanks

yeap i will put it on P35 mobo as well as for some reason there was a CPU MHz wall at that frequency regardless of vcore which i've used up to 1.9v

FSB at lower multi went to 410 or so

i reckon i could max it out just hoping P35 will like it a bit better

Nice dude, keep it up

hahah had a celeron440 a while back.. lol those conroe-L chips are guite funny little things aren't they .. btw good scores dinos :toast:

i honestly hope AMD's gonna have some decent gear
even cheap ass Cellies are killing them in Spi easily :(

Ha, ha, ha......They STILL produce Celeron CPUs?......:D

:rofl: i guess :shrug: :D

dinos22, totally OT but wow I didn't realize you were running 4-33 at nearly 600MHz! What kinda volts do you need on the dominator's to do that? Can you do that 1:1?

Quote:

---

Originally Posted by Johnny Bravo

dinos22, totally OT but wow I didn't realize you were running 4-33 at nearly 600MHz! What kinda volts do you need on the dominator's to do that? Can you do that 1:1?

---

nah man not OT at all
yeah these dominators are sweet as sweet :D
2.4vdimm basically :)

1:1 would be a problem with 680i...i've never heard of this chipset scaling to such FSB but i see no reason why it wouldn't go that high 1:1 if the chipset AND my CPU could do that lol

well this celeron has a FSB wall at around 410 but E6700 is around 550 with lots of cold

gah totally missed the fact it was a 680i heads still in P35 land these days :rolleyes: Still, nice sticks!!!!

Quote:

---

Originally Posted by Johnny Bravo

gah totally missed the fact it was a 680i heads still in P35 land these days :rolleyes: Still, nice sticks!!!!

---

hahah thought you might have :D

yeah i've seen eva do 600 with his sticks at these timings too i think on 680i

P965/P35 this kit with do 595-600MHz 4-4-4
dominators don't like going above 2.45v :shrug:

good good that's much more in line with what I have here ;)

jumped on Gigabyte P35 board and look at the 32M time

:D

took the No.1 spot on HWBOT

http://img296.imageshack.us/img296/3...i15m462fn7.png

did a few more screamers but will wait for Josh in second place to respond to the challenge :heh:


here is my latest ghetto insulation ... what do you fellas reckon :)

http://img72.imageshack.us/img72/177...blutackom4.png

Hmmmm.........You're geting better and better every day on the insulation thing.....;) :D

thanks hipro
she was pretty tight :D

very nice clocks.. almost 4.5ghz.. sweet :up:

Congrats my friend;)

Try you close me, my Celeron 32M WR:D

Quote:

---

Originally Posted by over@locker886

Congrats my friend;)

Try you close me, my Celeron 32M WR:D

---

what the hell

how did you get 12m there :confused: :shocked:

something's not right :confused:

over@locker886: your 32M is way too fast for those clocks :p

i will play with my E6700 with the mobo but there is no way in hell i could be that bad efficiency wise....must be something to do with the chips as i just looked at other HWBOT submissions and they all look very fast for the Mhz, clocks and latencies on the Celeron 430 >> in fact i think that is more realistic than Celeron 460 as extra cache on conroe ONLY helps in 1M

have a look at this run

it's FAST lol.........but i will check "fast" with E6700 just to compare

something is very strange here that is for sure

http://img507.imageshack.us/img507/2...i15m133yt4.png

even the 1M times look a bit out on Celeron 460 WTF :confused:

i had a look at Celeron 430 entries and none of them were ES CPUs
maybe there is a bug with ES CPUs or higher multies

doubt it's a board issue as there are others in Celeron460 submissions including Asus Blitz which are slower than my runs

will have to investigate this

http://img527.imageshack.us/img527/6...i15437she1.png

Quote:

---

Originally Posted by dinos22

what the hell

how did you get 12m there :confused: :shocked:

something's not right :confused:

---

1 : Abit-Quad-GT is really fast..;)
2 : I used tweaked Win2003 ;)

My Celeron time is about half-min slower than Conroe's.

Quote:

---

Originally Posted by over@locker886

1 : Abit-Quad-GT is really fast..;)
2 : I used tweaked Win2003 ;)

---

sorry i don't think that is the reason

if you have a really fast board you could beat me by 10 seconds but not 5 minutes

must be some issue with these chips (Celeron460)

Quote:

---

Originally Posted by dinos22

sorry i don't think that is the reason

if you have a really fast board you could beat me by 10 seconds but not 5 minutes

must be some issue with these chips (Celeron460)

---

Maybe ES chips slower than retail.. B2 vs B1ES..