Biostar TP35D2-A7 Vmod Vddr

Vmod Vddr :

http://www.ixtremtek.com/ixtek/Vmod/...BiostarP35.jpg

I tried that one yesterday just before seeing the post. Works perfectly with a 10K ohm VR too. I believe I found the vMCH mod and I might've found the vFSB mod as well.

Quote:

---

Originally Posted by Hutch

I tried that one yesterday just before seeing the post. Works perfectly with a 10K ohm VR too. I believe I found the vMCH mod and I might've found the vFSB mod as well.

---

Could you please post vmch and vfsb mods? I´m also looking for vdroop mod, thanks.

plz if somebody could find the mch volt mod that would be great. thanks in advanced.

Quote:

---

Originally Posted by Hutch

I tried that one yesterday just before seeing the post. Works perfectly with a 10K ohm VR too. I believe I found the vMCH mod and I might've found the vFSB mod as well.

---

hutch i need the vmch mod plz help me out. vfsb would be nice to if possible. is there any way of getting a vtt mod on this board. thanks in advance

I'll test it out later tonight. I've been sick as hell the past couple weeks and haven't been in the mood for doing anything. Just starting to feel better now.

Quote:

---

Originally Posted by Hutch

I'll test it out later tonight. I've been sick as hell the past couple weeks and haven't been in the mood for doing anything. Just starting to feel better now.

---

Eagerly awaiting for your findings, vcore readings go nuts once I load the 4 cores at 3.6-3.7ghz (speedfan shows a nice 1.41-1.46v swinging vcore). Can´t wait to hook up a DMM and see if that´s true.

Nice find :up:

Quote:

---

Originally Posted by npk

Eagerly awaiting for your findings, vcore readings go nuts once I load the 4 cores at 3.6-3.7ghz (speedfan shows a nice 1.41-1.46v swinging vcore). Can´t wait to hook up a DMM and see if that´s true.

---

Vcore suprisingly I've found to be incredibley good. Vaguely droops for me (measuring with multimeter.)

Found the vMCH mod got it to work successfully. Need to get a good close up picture though.

biostar TP35D2-A7 = best p35 on the planet for under $140.subscribed.

Quote:

---

Originally Posted by railmeat

biostar TP35D2-A7 = best p35 on the planet for under $140.subscribed.

---

darn right, no other motherboard in this price range can beat TP35D2-A7 + modded bios, I´ve tried almost all of them :) 500fsb on quad out of the box is just too good for a $100 mobo. Hutch I´m all ears :up:

here we go. I'm workin on the CPU PLL vmod. Unfortunately the vmod point isn't the same as the one on the Tforce P965 although the CPU PLL voltage readpoint is the same. I'm thinking that it may be on that 14 legged resistor below the vdimm resistor.

CPU PLL Voltage Read point (need help finding the mod point)

anyone found the vdroop mod?

mine only droops .02 from idle to load. havent reallt heard anybody needing it so havent looked. still working on the vpll mod.

edit: i guess its just a lil more than what i said. its very hot today cant load orthos fully it loads like 67-68c at 3.5ghz(500fsb) at 1.44 vcore. and im happy this everest shows the board but not only that but read vdimm and chipset voltages and are right on to.

Hello guys! Anybody have new idea to VPll mod?!
What about pencil VDimm & VMCH mods?!

I need vdroop&vpll mod.Does anybody know how to do it??? thnx:)

have someone a Vdroop mod?
With my QX6700 the droop is very big 0,06 V...

no vdroop mod for the board?

VDroop mod please....