Printable View
Guys :) :) :) Post your E6850 with Stepping and Vcore you use..........better with some Benchmark SPI ...ORTHOS ... PRIME...3Dmark 01.03.05.06.....
PROD. CODE: BX80557E6850SL9AU
MM#: 891188
FPO/BACTH #: L719A844
ok I started.....:) :) :)
http://img.techpowerup.org/070729/SPI E6850364.jpg
http://img.techpowerup.org/070729/3dmark01 E6850221.jpg
there is already a thread for the 6850, why start a new one?
VID 1.0375v ??
Hmm...
core temp bug... the real vcore is 1.53v check the uguru panel ;)Quote:
Originally Posted by Clint
VID != vCore ;)Quote:
Originally Posted by Solarfall
yes i know.. whats ur point.Quote:
Originally Posted by K.I.T.T.
I think KITT meant VID "DOES NOT" equal vcore.
His point is that the VID is the stock vcore of a cpu and it's a set value, specific to each chip and can't be altered. Vcore is not the same as VID. It's not a coretemp bug that the VID is not the same as the vcore used.
Thank you :)Quote:
Originally Posted by lawrywild
Probably should have written 'is different' rather than != ...would have avoided confusion :p:
Let's see some 4+ with orthos ran for awhile.Most of E6850(retail) will go above 4 on air/water,just not stable at all:down: .
L719B027
Water cooled
1.55v in bios
http://img411.imageshack.us/img411/9...rsstpz2.th.jpg
e6850@4Ghz on air in matx case (antec nsk3400) with an antec su380w for PSU! gigabyte GA-G33M-DS2R bios F2
FSB@444, ratio 9x ,vcore@1.5625v in bios
e6850 retail box
http://img527.imageshack.us/img527/8063/g7copierlq7.jpg
Thermalright ultra120 w/ NMB MAT 120 (1900rpm)
http://img502.imageshack.us/img502/8...pierxw9.th.jpg
occt passed
http://img411.imageshack.us/img411/9...t110nf5.th.jpg
orthos 2hours:
http://img502.imageshack.us/img502/6346/2h02ul4.th.jpg
Quote:
Originally Posted by pvhk
Excellent, I have the same mobo as you...I will drop a quad on it:D
Did need to put heatsinks on any components at that speed?
did this on the mofset: home made! (but not necessary)!
http://s209.photobucket.com/albums/b...77_2copier.jpg
HR05 + fan on the northbridge:
http://img410.imageshack.us/img410/5...piertl0.th.jpg
mine should be arriving tomorrow from purolator. :)
will have tests performed prolly tuesday morning around 5am :p
So except from the north and south chipsets there is no components that is getting really hot?Quote:
Originally Posted by pvhk
That is amazing at 444MHz!:D
I knew the moment I laid my eyes on this board it would last me long, simply can't be beat for small form builds:up:
no! ;)Quote:
Originally Posted by Clint
:clap: :clap: :clap:Quote:
Originally Posted by mercyless
road-runner what speeds were you running when you did your superpi 1m run?
14.312 is only a wee bit faster than my 6420@3504.:confused:
I hope that wasn't at 4+.
If you guys are gonna post your clocks make sure u post some temps too.
So tossed up to either get a e6850 or a q6600....
even if you get a 4gig e6850 it simply is not worth getting over the 3.6 u already have in terms of performance :shrug: but if u are obsessed with MHZ then it's an easy choice :lol:Quote:
Originally Posted by ineedaname
using asus P5K-Prem.
http://img136.imageshack.us/img136/5...ss158vcnt5.gif
Yes that was at 4203Mhz but running both at the same time.Quote:
Originally Posted by Peepaw
Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....
http://ocidb.com/albums/userpics/10062/mini4500.jpg
http://ocidb.com/albums/userpics/10062/normal_550.png
Ηow can it be that slower? Did you use the same multiplier?