Xeon X3210 initial info

Printable View

07-28-2007, 06:47 AM
sofarfrome

1 Attachment(s)

Xeon X3210 initial info

Batch code: L648G443
stepping: B3
pack date: 05/30/07

I got this from proadvantage for $255 shipped. It will pass all 3D tests at 3.6GHz/1.5vcore but fails Prime95 within minutes. Increasing vcore to 1.55 will make it run Prime95 longer (I shut it down after 30mins due to heat). But it is currently running 3.45GHz at 1.42vcore. With some more tweaking I am sure I can get it to 3.5 but for starters this is petty good IMO. I am going to let it run a while longer but at 1 hour I am going to shut it down so I can on my temps, perhaps remount the HSF or add another fan to do the push/pull thing. Or finish my WC setup and see where the temps go.

System specs:

Asus P5K-Deluxe
Crucial 10th anniversary (2x1GB) 2.2vdimm 4-4-4-12
BFG 7950GT OC
Silverstone strider 850W
WD250GB Satall
Plexter 716A
TR 120 Ultra Extreme
07-28-2007, 06:50 AM
Start

Hehe you guys will make me push my chip to see how much more it got.
07-28-2007, 10:18 AM
Shakir_Akbari

is there a discrepancy with the speedfan temp compared to the coretemp readings for this chip? :shrug:
07-28-2007, 10:28 AM
Start

1 Attachment(s)

Quote:

Originally Posted by Shakir_Akbari

is there a discrepancy with the speedfan temp compared to the coretemp readings for this chip? :shrug:

Indeed
07-29-2007, 01:11 PM
TyphooN

whats the max vcore you guys would use with watercooling 24/7 max on a x3210?
07-29-2007, 02:07 PM
njkid32

I run my X3210 at 450x8 on WCG 24/7 at 1.53v on water. I'm also on a P5K DLX.. Although this cpu did the same exact oc on the Gigabyte DS3R.
http://img411.imageshack.us/img411/6...ax64gc3.th.jpg
07-29-2007, 02:54 PM
Start

Quote:

Originally Posted by njkid32

I run my X3210 at 450x8 on WCG 24/7 at 1.53v on water. I'm also on a P5K DLX.. Although this cpu did the same exact oc on the Gigabyte DS3R.
http://img411.imageshack.us/img411/6...ax64gc3.th.jpg

What is the stepping info on that thing?
07-30-2007, 01:31 AM
Spanki

SP33D, is that 1.65 vCore correct? That seems awfully high for a ~3GHz clock on a 1.250 VID chip... or was that just a work in progress?
07-30-2007, 02:12 AM
Bail_w

Quote:

Originally Posted by Spanki

SP33D, is that 1.65 vCore correct? That seems awfully high for a ~3GHz clock on a 1.250 VID chip... or was that just a work in progress?

1.3v, speedfan is bugged
07-30-2007, 03:22 AM
Spanki

Quote:

Originally Posted by Bail_w

1.3v, speedfan is bugged

Ahh - phwew! Had me worried :).
07-30-2007, 12:38 PM
misterpaul

Quote:

Originally Posted by SP33DFR34K

What is the stepping info on that thing?

look at the screenshot, it's B3.
07-30-2007, 02:31 PM
Start

Quote:

Originally Posted by Spanki

SP33D, is that 1.65 vCore correct? That seems awfully high for a ~3GHz clock on a 1.250 VID chip... or was that just a work in progress?

Quote:

Originally Posted by Bail_w

1.3v, speedfan is bugged

1.37v actually
07-30-2007, 04:07 PM
Bail_w

well it said 1.3 on your abit software, maybe your vdrop is very big.
08-02-2007, 01:16 PM
Dredd

Just our of curiosity guys, will an X3210 do 3.2Ghz on an Abit IP35 Pro pretty easily? I don't really need more than 3.2 and would upgrade from my E6400 only to have more cores.

Thanks in advance