QX6800 G0 L712A638 (4200MHz on air)

I just tested my new QX6800 ES. I have to say that I'm impressed.

I can bench Wprime at 4GHz (1.56V) on aircooling. It can do 3.7GHz with default voltage 1.32V. G0 rocks! :D

Setup: Crappy ASUS cooler on cpu.
http://img512.imageshack.us/img512/3143/jhyne8.th.jpg

CPU:
http://img508.imageshack.us/img508/2...tialxf6.th.jpg

Max MHz 1.6V(4200):
http://valid.x86-secret.com/show_oc.php?id=221101

Max fsb on air (490):
http://valid.x86-secret.com/show_oc.php?id=221102

Wprime @ 4GHz 1.56V (aircooled) Bad time for some reason? Maybe too hot.

http://img110.imageshack.us/img110/7...4ghzlu0.th.jpg

Holy SMOKES

i hate you...:D i would have to sell one of my kidneys so that i could afford to buy that chip..
but anyways sweet clocks bro :toast: ..
there on earth do people find these ES cpus??
is lukes cascade working ??? you need to get that chip under it asap ;)

Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...

those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120

Quote:

---

Originally Posted by strange|ife

those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120

---

Yeah but that's with max fan speed. Tuniq and Ultra 120 can do same temps with less db. korrrhonen nice g0 you got there :up:

G0 ftw.

Nice results.

:shocked:
You got the Good ONE my friend! Nice results with "that" CPU-cooler.
Kick it ass!

Quote:

---

Originally Posted by graysky

Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...

---

:D I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

Ambient temperature were ~25c

Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz :yepp:

Great clocks!

What is the best you can do fully stable?

Sidenote* That processor is going for $1500 on newegg right now :eek:

Very nice!

Sweet chip mate :D

Quote:

---

Originally Posted by SF3D

:D I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

Ambient temperature were ~25c

Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz :yepp:

---

cant wait for the cascade runs... lets hope that you will get +5ghz :rocker:

Is it an engineering sample chip?

I dont see a intel spec sheet..so....

not sure about the ES but the non ES has a TDP of 130watts!

Yes, this is ES chip.

I will test this under my cascade today or tomorrow.

Where hell u get these ES cpus?
I wanna too :yepp:

Great, spank that CPU real hard under cascade :D

Woah very nice cpu .. how about wprime 1024M ?

my Xeon X3230 with wPrime 32M + 1024M @4000Mhz at 1.64v and max cpuz validation also at 1.64v of 4112Mhz!

water cooled of course heh

http://fileshosts.com/intel/Asus/Bli...wprime_all.png

http://fileshosts.com/intel/Asus/Bli..._validated.png

Very nice results looking forward to some cascade action :)

nice cpu you got there!

Good Cpu :D yeah !!!

this one from bob too

http://img520.imageshack.us/img520/8460/wiprime1tk8.jpg

Same Cpus , Same Overclocking !!!

I had make a good selection :D

SF3D,

Interesting, I have an L712A200 Q6600 that is a B3 Step.

I have the deluxe Also, Could you post your bios settings?

Emmett