Project Gateway case

Well on Saturday i had to help move my lil bro stuff out of his apartment to our house, and noticed a guy who had a yard sell.
So we stopped by and i say a Gateway computer, and bought it for $20 wit and extra Ethernet cable.
I thought it was a pretty good by.
When i got home had to clean up some of the gunk on the outside.
Well i took the mouse and keyboard from our old desktop, and moniter and hooked up the computer, and it powered up, but didn't display anythin' on the moniter. :confused:
So i rechecked my connections and they were fine.
So after that i took the side cover on the case and inside everythin' was covered in dust, and some cobwebs.....
So i took some things out and cleaned it out of the dust.
The heatsink for the CPU under the fan had dust caked on there it was nasty...
So i cleaned that out, and then took everythin' out, and then took apart the case parts on the outside.
And now everythin' is apart in my livin' room. lol.

I was wonderin' if i could put in another motherboard in the Gateway case and mod it to whateva i want....
It came wit a Quatum HDD, an extra moniter PCI card, and an extra sound card i think...
It suppose to have a P4 that i know of....

On wit the pictures:

http://www.imagestation.com/picture/...c/e873914d.jpg

http://www.imagestation.com/picture/...e/e873907c.jpg

http://www.imagestation.com/picture/...0/e87391a8.jpg

http://www.imagestation.com/picture/...8/e8739274.jpg

http://www.imagestation.com/picture/...1/e873900b.jpg

http://www.imagestation.com/picture/...a/e8738f9d.jpg

http://www.imagestation.com/picture/...7/e8738f08.jpg

http://www.imagestation.com/picture/...b/e8738e7d.jpg

http://www.imagestation.com/picture/...8/e8738e11.jpg

http://www.imagestation.com/picture/...9/e8738d91.jpg

http://www.imagestation.com/picture/...c/e8738d02.jpg

http://www.imagestation.com/picture/...2/e8738c81.jpg

http://www.imagestation.com/picture/...2/e8738b38.jpg

http://www.imagestation.com/picture/...9/e8738ae1.jpg

What do you guys think??
This is my first computer build up.
Thanks for any input.

Looks like it takes a standard mATX mobo. PSU is pretty proprietary looking, but you may be able to mod it to hold a standard PSU though. Cut the rear fan hole out to accomodate a 120mm fan. Oh, and hang on to that XP home license, you can reuse it on another PC. That alone was worth $20 :up: Nice of them to put it on that plastic piece so it can come off the case without tearing up.

this looks old lol

LOL check out the prehistoric hardware..

so have you got any plans on the modding, what are you gonna do with the case ??

Windows fTW! :)


phase cooling:)

Did you try both onboard video and added in PCI card? or even remove the added in PCI card and try just onboard?

Quote:

---

Originally Posted by SparkyJJO

Looks like it takes a standard mATX mobo. PSU is pretty proprietary looking, but you may be able to mod it to hold a standard PSU though. Cut the rear fan hole out to accomodate a 120mm fan. Oh, and hang on to that XP home license, you can reuse it on another PC. That alone was worth $20 :up: Nice of them to put it on that plastic piece so it can come off the case without tearing up.

---

^^
So i guess i need a mirco ATX mobo??
Yeah it is small, but it is bigger than out old school HP....
I was thinkin' of stickin' a small radiator there or somethin'?? :shrug:
Yeah i was surprised about the XP home license.

Quote:

---

Originally Posted by Asgard_thor

this looks old lol

---

^^
Yeah i know, but i'm leanin' towards buildin' it for my dad to use instead of Win98....:shakes:

Quote:

---

Originally Posted by Solarfall

LOL check out the prehistoric hardware..

so have you got any plans on the modding, what are you gonna do with the case ??

---

^^
Yeah it was at a yard sale...
But $20 wit an Ethernet cable was a pretty good deal i think.
The guy wanted $50 wit a moniter....
Where the front cover is i was goin' to put some LED's to shine in the openin' on the base. :shrug:

Quote:

---

Originally Posted by Asgard_thor

Windows fTW! :)


phase cooling:)

---

^^
Yeah i was thinkin' about a window. :D

Quote:

---

Originally Posted by cyanidebm

Did you try both onboard video and added in PCI card? or even remove the added in PCI card and try just onboard?

---

^^
Haven't tried that yet......
Might as well start fresh, i suppose.

Well here are some slow updates i've done to the case.

http://www.imagestation.com/picture/...f/e84edb1b.jpg
^^
Fan and the front cover on. It was a test fit.

http://www.imagestation.com/picture/...a/e84eda81.jpg
^^
Up close shot of the intake fan, and the front cover. I know the edges are choppy, but soon you will see the finally finish cover.

http://www.imagestation.com/picture/...6/e84eda38.jpg
^^
80mm Blue LED fan fits nice.

http://www.imagestation.com/picture/...8/e84ed980.jpg
^^
Used rubber groments and cut them in half and used them as rubber washers.

http://www.imagestation.com/picture/...3/e84ed924.jpg
^^
Fan on wit black cover.

http://www.imagestation.com/picture/...e/e84ece4c.jpg
^^
Shot of the black cover. Took a file to the cover to smooth out the edges. Looks better IMO.

http://www.imagestation.com/picture/...a/e84ecde0.jpg
^^
Front sliver case. Took a file to it also. I cut out the Gateway logo.

http://www.imagestation.com/picture/...a/e84ecd9c.jpg
^^
My 92mm bladed fan in an 80mm frame. Moves 36.89cfm at 2100RPM. This is my exhaust fan.

http://www.imagestation.com/picture/...9/e84eccda.jpg
^^
Whole cover shot, finished.

http://www.imagestation.com/picture/...a/e84ecbfe.jpg
^^
Cover up close.

http://www.imagestation.com/picture/...f/e84ecbac.jpg
^^
Cover on wit the intake fan on.

http://www.imagestation.com/picture/...f/e84ecb61.jpg
^^
Fan together that i will used.

http://www.imagestation.com/picture/...a/e84eca8d.jpg
^^
Fans in their places. This is a mock up.

http://www.imagestation.com/picture/...d/e84eca12.jpg
^^
Exhaust fan mock up.

http://www.imagestation.com/picture/...2/e84ec8aa.jpg
^^
Intake fan. Moves 31.1cfm at 2500RPM.

http://www.imagestation.com/picture/...3/e84ec902.jpg
^^
Exhaust part of the case. Next part of my cuttin' up the case. What do you guys suggest on cuttin' this circular part of the case for the exhaust. Cause when i put the fan inside the case, i feel some turblence in front of the fan, and if i stick the fan outside i can hardly feel any air bein' sucked out.

Parts of the computer follows:

Motherboard:
http://www.newegg.com/product/produc...82E16813130100

PSU:
http://www.newegg.com/product/produc...82E16817338008

Processor:
http://www.newegg.com/product/produc...82E16819115014

RAM:
http://www.newegg.com/product/produc...82E16820134141

HDD:
http://www.newegg.com/product/produc...82E16822136076

Moniter:
http://www.newegg.com/product/produc...82E16824001087

DVD Burner:
http://www.newegg.com/product/produc...82E16827151145

I think all these new parts will work well for my dad.
He told me that he wanted a 500GB hard drive and i was like :rofl:
Cause he wanted to burn movies, and make CD's and use it for his embroidery machine.
IMO this should be a really good computer for him/our family for the time bein' until i get mine built. :p:

Just cut the rear exhaust part of the case.

http://www.imagestation.com/picture/...a/e84b8492.jpg

http://www.imagestation.com/picture/...6/e84b8452.jpg
^^
Not the cleanest cut, but it will work and air is actually movin' out of the case, instead of bein' blocked by the grille that was there.

Took me about 3 hours to cut the darn hole.

Next is the motherboard I/O shield i have to cut the case to place the I/O shield so that the MSI motherboard will fit.

The case is coming along nicely. I built a system for a friend with pretty much that same motherboard and it performed very nicely. I think you could get some faster ram for about the same price though, not trying to tell u what to buy though.

Quote:

---

Originally Posted by mattd390

The case is coming along nicely. I built a system for a friend with pretty much that same motherboard and it performed very nicely. I think you could get some faster ram for about the same price though, not trying to tell u what to buy though.

---

Thanks man.

Instead of gettin' the MSI 945GZM6-F LGA 775 Intel 945GZ Micro ATX Intel Motherboard, I was forced to get a Gigabyte mATX board.

Gigabyte mATX mother board is: http://www.newegg.com/Product/Produc...82E16813128058

And the DVD burner is from Phillips which was on sale.

What are you're guys opinion on Athena PSU: http://www.newegg.com/Product/Produc...82E16817338008

Now all i have to do is cut a hole for the I/O shield...
Thanks for anyone's input.

Well i'm finally finished wit the computer build.

http://www.imagestation.com/picture/...2/e82b1b4c.jpg
^^
Showin' the internals.

http://www.imagestation.com/picture/...a/e82b1a98.jpg
^^
Showin' the motherboard, DVD-RW, CPU, and PSU.

http://www.imagestation.com/picture/...3/e82b19e4.jpg
^^
New monitor.

http://www.imagestation.com/picture/...5/e82b1958.jpg
^^
Monitor placed.

http://www.imagestation.com/picture/...9/e82b141e.jpg
^^
Had it out, waitin' for the DSL modem to connect, and had to get a longer USB Type-A cord for our USB hub.

What do you guys think??
My friend mentioned that i could overclock the CPU alittle or somethin' like tuning the computer to perform better......

I'll take a night picture tonight also, even though the front 80mm LEF fan isn't that bright.

Well here are no semi-night shots.

http://www.imagestation.com/picture/...7/e828ee07.jpg

http://www.imagestation.com/picture/...e/e828ed44.jpg

Er no offense but you really could've went with a bigger fan :p:

either way ur mod still looks great.

That is really fantastic what you did to that PC. Very classy, yet modern. Good job!

Take that green LED out and replace it with the oh-so-beautiful Radio Shack Blue. ;)

Quote:

---

Originally Posted by ineedaname

Er no offense but you really could've went with a bigger fan :p:

either way ur mod still looks great.

---

Yeah that's what some people say.
Thanks for the comment.

Quote:

---

Originally Posted by Raptor22

That is really fantastic what you did to that PC. Very classy, yet modern. Good job!

---

Thanks for the comment.

Quote:

---

Originally Posted by evoic

Take that green LED out and replace it with the oh-so-beautiful Radio Shack Blue. ;)

---

Yeah i was thinkin' of changin' the LED but i like how it looks now, it's grown on me. I just need to hook up a case speaker, and HDD LED.