prime95 :)

Printable View

Show 100 post(s) from this thread on one page

07-21-2007, 10:37 PM
PcCI2iminal

air cooled E6850 week23 4100mhz->Pi32m, 4ghz->prime95 :)

the good news :)

http://img227.imageshack.us/img227/5029/024copykz3.jpg
1.6v
http://img460.imageshack.us/img460/9...0pi32mbzl6.jpg
1.58v
http://img460.imageshack.us/img460/7...primeokmz3.jpg

3600mhz @ 1.3v

max screen at 1.65v
http://img461.imageshack.us/img461/7...mhzcpuzbn3.jpg
http://valid.x86-secret.com/show_oc.php?id=219533

and the bad news
FSB wall ->500FSB :(

i will give some cold

CPU->E6850 L723A
MB->Gigabyte P35-DS4
Cooler->Thermalright Ultra 120 eXtreme
Fan->San Ace F12-PWM
RAM->A-data 8500 EE
PSU->Giga-EZ 1000w
Room temp->26C
07-21-2007, 10:53 PM
StyM

nice.. :D
07-21-2007, 11:02 PM
safan80

nice.. so what's you 1M superpi time?
07-21-2007, 11:19 PM
rithina

Very new cpu. ouch..sad to hear wall is at 500 fsb...but 3.6 at 1.3v is excellent for 24/7 for most of u
07-21-2007, 11:36 PM
Cordovader

Very nice PcCI2iminal :toast:

It´s curious because my E6850 E0 does almost literally the same on air with an Ultra Extreme too:

Max validation at same vcore
http://img442.imageshack.us/img442/9315/cpu4259ks7.png

Almost the same Spi 32m (23mhz more)
http://img71.imageshack.us/img71/409...2ghzcs3.th.jpg

And same stability, 3,6ghz 1,3v
http://img240.imageshack.us/img240/5...z13vso1.th.jpg

It´s nice to see that the retail one´s are so good too :D
07-22-2007, 02:51 AM
Endre

Excellent results by both of you! I've just ordered a similar system to the OP, a E6850, DS3P (DS4 with less cooling), and some cheap Ballistix 5300. Can't wait when I see these results. The 6850 seems like a better choice than 6750 if you wanna have a "guarantee" to reach frequencies at least close to 4G stable with highend air or lowend water.

A shame with the FSB wall, I'm glad I didn't order a lower MP chip.
07-22-2007, 03:11 AM
HamidFULL

very nice ... and idle and load temp??
07-22-2007, 03:15 AM
ceevee

Great news. E6850 should be here as well in a couple days.

I'm trying some new stuff with this build, went with a DDR3 only board and going to try a TEC cooler for the CPU.

Looking to get 3.8-4.0Ghz 24/7
07-22-2007, 03:45 AM
PcCI2iminal

Quote:

Originally Posted by Cordovader

Very nice PcCI2iminal :toast:

It´s curious because my E6850 E0 does almost literally the same on air with an Ultra Extreme too:

hehehehe

nicely done mate :)

what fan are you using?

Quote:

very nice ... and idle and load temp??

I really don`t know ,the CoreTemp does not report the temps right with this cpu
idle < room temp :S
but the Thermalright`s base is not hot @ 4ghz

Quote:

A shame with the FSB wall, I'm glad I didn't order a lower MP chip.

Unforunately the chip FSB walled @ 500 fsb on air(6x,7x,8x)

but it`s time to break some walls

http://img489.imageshack.us/img489/6...iostempat4.jpg

:)
07-22-2007, 03:49 AM
eva2000

Nice... but shame about the FSB wall :(

nearly everyone of my cpus is walled at 490-514FSB on water cooling LOL

bought a 2nd hand E6600 L709A958 to play with hope it has a higher FSB wall :D
07-22-2007, 04:15 AM
PcCI2iminal

eva2000

i want a 600FSB+ chip :(
and good luck with your "new" E66 :)

Quote:

Originally Posted by safan80

nice.. so what's you 1M superpi time?

I'll try that. It may take a day to re-run them all
07-22-2007, 05:42 AM
PcCI2iminal

http://img247.imageshack.us/img247/3007/imagemsg8.jpg
http://img247.imageshack.us/img247/3...00mhzokfi1.jpg

and a bit more for screen hehehe
http://valid.x86-secret.com/show_oc.php?id=219654

no more than 534FSB (6x,7x,8x)

cooling->dice
vcore->1.74v
07-22-2007, 06:08 AM
Dynasty

nice work with the e6850......:)
07-22-2007, 06:24 AM
eva2000

Quote:

Originally Posted by PcCI2iminal

eva2000

i want a 600FSB+ chip :(
and good luck with your "new" E66 :)

I'll try that. It may take a day to re-run them all

thanks

looks like you managed to squeeze a bit more out 534FSB is decent and 4.7ghz is nothing to complain about :D

what's the max on DI @~1.66v vcore ??
07-22-2007, 06:36 AM
over@locker886

Great chip my friend!:up:

But low fsb wall is little sad..:(
07-22-2007, 06:45 AM
PcCI2iminal

here George

http://img359.imageshack.us/img359/7...hzpi1mbyg5.jpg

1.65 Bios
1.62v real

Quote:

looks like you managed to squeeze a bit more out 534FSB is decent and 4.7ghz is nothing to complain about

:)

you are rite ,nothing to complain ,I`m very happy with my new 4ghz Conroe

Bit of a Dilema.
put this cpu in my main machine
or keep my quad @ 3400mhz :S
07-22-2007, 06:48 AM
over@locker886

Quote:

Originally Posted by PcCI2iminal

here George

you are rite ,nothing to complain ,I`m very happy with my new 4ghz Conroe

Bit of a Dilema.
put this cpu in my main machine
or keep my quad @ 3400mhz :S

I vote about 4Ghz Conroe;)
07-22-2007, 06:52 AM
Solarfall

excellent numbers brotha.. what about 3Dmarks
07-22-2007, 07:08 AM
kiwi

Great on air/water and maybe phase but rather sad for xtreme cooling and benching :( Such chips would do at least 5Ghz on DICE if not fsb wall

Thanks for info :)
07-28-2007, 02:52 PM
PcCI2iminal

RD600 + Intel cooler box(QX6700)

http://img165.imageshack.us/img165/4042/006copysy9.jpg
http://img66.imageshack.us/img66/2310/untitledwb3.jpg

3.78GHZ was all I could get and the E6850 works fine on 1222 Bios

Room temp @ 24C

:D
07-28-2007, 03:38 PM
luihed

Quote:

Originally Posted by kiwi

Great on air/water and maybe phase but rather sad for xtreme cooling and benching :( Such chips would do at least 5Ghz on DICE if not fsb wall

Thanks for info :)

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing
07-28-2007, 08:05 PM
nugzo

Quote:

Originally Posted by luihed

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

I wouldn't be disapointed. You have a very special E6600 if it does 4.3. I just ordered a 6850 from the egg. be here tuesday. My goal has been 4ghz 24/7 on good water. I've been able to make it to 3.9 on my 10th E6600. Maybe this 6850 will finally get me there.
07-28-2007, 11:47 PM
zsamz_

i doubt if many e6850 wont reach 4.0
never got to test with my p35 board died as soon as i put it in lol
but my old p5b got it to 4.0 stable on first try with my zalman
my 120 extreme came in 30c load
07-29-2007, 05:02 AM
erwinz

Quote:

Originally Posted by luihed

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

so you got an E6850..

wow so 1333 cpu's are slow in pi..
07-29-2007, 06:12 AM
Cordovader

Quote:

Originally Posted by PcCI2iminal

hehehehe

nicely done mate :)

what fan are you using?

The retail fan that comes with the Tuniq tower :)

My cpu tops out on air at 538fsb +/- But days ago i did a little test with LN2 (the board, unmoded, hanged and i had to stop early) and it changed :p:

1m 5133mhz 1,68v
http://img54.imageshack.us/img54/4725/1m5133hx3.th.jpg

http://img54.imageshack.us/img54/6438/ln2011pnb2.jpg

Right now i´m priming at 3,2ghz 1,19v, 20m so far :p:

Greetings :toast:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:46 AM.

XtremeSystems