Nice batch of Micron ddr3 in at OCZ

some early tests back at the lab by the boys...looking good for the 1600EB we just released.

http://www.ocztechnologyforum.com/st...y1_2ghzram.PNG

http://www.ocztechnologyforum.com/st.../DDR3_2032.JPG

We shipped a kit out for independant test so more results soon ;) Max voltage here was just over 2V...1.8 is very much a sweet spot we found already.

nice :)
Looking forward to getting a DDR3 system

Amazing chips, seems like micron will win high end crown again.

nice results Tony :up:
OCZ is back :D

Well looks like this new bin hit the 1800 release point, so we will have 1600 and 1800 speeds available.

We shipped a kit to EVA2000, he will stress them up for sure ;) as soon as the arrive.

Tony, they any good at tight timings?

Quote:

---

Originally Posted by Tony

Well looks like this new bin hit the 1800 release point, so we will have 1600 and 1800 speeds available.

We shipped a kit to EVA2000, he will stress them up for sure ;) as soon as the arrive.

---

Sure will... will set up the Asus Blitz Extreme for testing :D

Which board was the above results on ?

Quote:

---

Originally Posted by Tony

Well looks like this new bin hit the 1800 release point, so we will have 1600 and 1800 speeds available.

We shipped a kit to EVA2000, he will stress them up for sure ;) as soon as the arrive.

---

hahaha I was sitting here hoping "ship it to eva ship it to eva" :rofl:

Wow thats some seriously bad DDR3 Tony :clap: :shocked:

Quote:

---

Originally Posted by eva2000

Sure will... will set up the Asus Blitz Extreme for testing :D

Which board was the above results on ?

---

very nice eva2000 :D nice toys.. :) I'll wait for your results.. :D hope your memory arrives ASAP.. :D

Micron strikes again with the "Z9" chips.

Now we know why all that cheap DDR2 has been available everywhere...after these new Micron chips hit the market, none of the other stuff will have a chance.

A friend of mine at Micron did a lot of the layout work on that IC. This DDR3 IC was done by the Dallas team and not the Boise team and the Dallas team is mostly from TI memory division and have worked on memory layout for over 20 years.

So combining experience of Dallas team, 20 years of hard work, will bring us memory, which doesn't die from high voltages :D

Wow impressive clocks. Hopefully they clock that good outside the lab too ;)

OCZ PC3-14400 Platnium Micron Z9 babies have arrived :woot:

http://i4memory.com/reviewimages/mem...3_14400_01.jpg http://i4memory.com/reviewimages/mem...3_14400_03.jpg http://i4memory.com/reviewimages/mem...3_14400_05.jpg http://i4memory.com/reviewimages/mem...3_14400_06.jpg

Setting up Asus Blitz Extreme right now. Thanks OCZ/Tony :up:

Oh la la, sexy DDR3 :D

Wich type of Micron chips are used?

Are memory modules single rank or double rank ? In other words there are chips only on one side of the memory module or both sides of the memory module?

Thanks.

Great chips Micron !!

I recieved a Kit DDR3 of Geil , Kingston , Chaintech is all chips Elpida (max 800 :( ) , i hope recieved a Kit Adata , Winchip with others Chips :) (and maybe OCZ ... wait & see :)

Quote:

---

Originally Posted by Fr3ak

Wow impressive clocks. Hopefully they clock that good outside the lab too ;)

---

Yeah..
Hope they'll clock just as good outside lab, time will tell ;)

You're kidding me :clap:

Awesone Chips

Micron still better on DDR3

Quote:

---

Originally Posted by boblemagnifique

Great chips Micron !!

I recieved a Kit DDR3 of Geil , Kingston , Chaintech is all chips Elpida (max 800 :( ) , i hope recieved a Kit Adata , Winchip with others Chips :) (and maybe OCZ ... wait & see :)

---

AFAIK A-data doesnt have micron DDR3 now

Yes it's my first time playing with DDR3 platform :) Thanks goes out to Asus for supplying the Asus Blitz Extreme and OCZ for supplying the 2GB OCZ PC3-14400 Platinum dual channel kit (Micron DDR3 IC based) and the 1KW OCZ ProXStream power supply :)

System:

• Intel Core 2 Extreme X6800 L627A872
• Swiftech G4 Storm/Thermochill 120.3/MCP655
• Asus Blitz Extreme 0601 bios
• 128MB Gainward FX5200 PCI
• 2x1GB OCZ PC3-14400 Platinum - DDR3-1800 rated at 8-8-8-27 at 1.9v
• 500GB Seagate 7200.10 SATA on SATA1 Port
• LiteOn 165H DVD Burner
• Sony FDD
• 1KW OCZ ProXStream
• WinXP Pro SP2

I've only had the system setup in the last 48 hrs so still trying to find my way on this new DDR3 platform.

Some super pi runs, all with no copy-waza/maxmem tweaks.

At stock mem speed and stock main timings of 900mhz 8-8-8-27 at 1.9v vdimm

http://fileshosts.com/intel/Asus/Bli...3m26s109ms.png

32M
http://fileshosts.com/intel/Asus/Bli..._bandwidth.png

Tighten timings to 7-6-5-18 but still at 900mhz memory frequency.

http://fileshosts.com/intel/Asus/Bli...3m12s375ms.png

32M
http://fileshosts.com/intel/Asus/Bli...width_cpuz.png

1M
http://fileshosts.com/intel/Asus/Bli...m_13s875ms.png

Prime95 v25.3 Blend Load
http://fileshosts.com/intel/Asus/Bli...blend_load.png

very great results,without tweak eva2000:up:

I think easy break sub 13min with tweaks:)

Micron Z9 :bounces: