-
Adata 8500 (EPP) CAS4 @ 1130mhz CR 1T (P5K-E)
-
1 Attachment(s)
Nice post...good details :)
Is it me or what though.....or are like ALL memory modules in the entire WORLD the same regardless of make/model/chips used/platform used?
I see no more than 10.8gb/s from ANYONE?
I'm runnin' A-DATA DDR2-800 on a 533mhz divider at 750mhz (4,4,4,12,18,2t) powered by an AM2 X2-3600 (3ghz) in an NFORCE 570ultra MOBO and get this....
I find it truly insane that at 1250mhz with a 3.6ghz C2D you get virtually the exact same results, with only a minute difference in timings.
What's the deal? Surely there must be some reason for this?
-
did you test without the thermalright heatspreaders, were all tests done with them? did you need to remove the stock heatspreaders to use them? if you tested without, did they make a difference?
i bought 4 kits of the 667 and 800 a-data's for friends builds (lower budget) and they all worked flawlessly. a set of the 667's did 462 memtest stable @ 1.8v when i was playing with them. and at the time you couldn't touch the price.
-
hmm, It seems new heatspreader style's A-DATA better than old..
Thanks for sharing PcCI2iminal!
-
holy crap dude 1340mhz CAS 5-5-4-12 thats really awesome results.. thanks for sharing mate. :up:
-
Quote:
Originally Posted by
SOLDNER-MOFO64
I find it truly insane that at 1250mhz with a 3.6ghz C2D you get virtually the exact same results, with only a minute difference in timings.
i think its because the integrated memory controller on athlons gives them a nice memory performance boost, intel's memory controller is still on the northbridge
-
Very nice.. seems A-data always has modules than handle 1T better than most modules ?
-
Quote:
Originally Posted by
jimmyz
did you test without the thermalright heatspreaders, were all tests done with them? did you need to remove the stock heatspreaders to use them? if you tested without, did they make a difference?
i bought 4 kits of the 667 and 800 a-data's for friends builds (lower budget) and they all worked flawlessly. a set of the 667's did 462 memtest stable @ 1.8v when i was playing with them. and at the time you couldn't touch the price.
i have played with default HS for mins and it was very hot,i don`t think its safe to put some serious volts with room temp @ 26C
Quote:
did you need to remove the stock heatspreaders to use them?
you don`t need to take off the original HS but always is recommendable to cool all parts and Thermalright is one of the best.
Quote:
It seems new heatspreader style's A-DATA better than old..
the color is great ,red/white i like it :D
-
Quote:
Originally Posted by
eva2000
Very nice.. seems A-data always has modules than handle 1T better than most modules ?
here what i got with BallistiX
http://img217.imageshack.us/img217/1...tpi32mbeu0.jpg
for 1mb Pi 960-970mhz is possible
-
how do you like the P5K-E? im looking to get one atm. would u recommend it?
-
i've seen OPB do DDR1200 cas4-4-4-x with 1T
but no superPI so what's the point........i asked him but maybe he's too busy with all the hardware he plays i guess
show us some comparative superPI PLEASE
-
What was the max voltage you were running ?
-
Quote:
Originally Posted by
SOLDNER-MOFO64
Nice post...good details :)
Is it me or what though.....or are like ALL memory modules in the entire WORLD the same regardless of make/model/chips used/platform used?
I see no more than 10.8gb/s from ANYONE?
I'm runnin' A-DATA DDR2-800 on a 533mhz divider at 750mhz (4,4,4,12,18,2t) powered by an AM2 X2-3600 (3ghz) in an NFORCE 570ultra MOBO and get this....
I find it truly insane that at 1250mhz with a 3.6ghz C2D you get virtually the exact same results, with only a minute difference in timings.
What's the deal? Surely there must be some reason for this?
It;s called integrated mem.controler. But the deal here is not to compare mem.bandwith ;) Show us 2x32m air cooled in 13.xx minute range, if want to fight c2d's ;)
Great ram PcCI2iminal, keep it pushing:clap:
-
nice result TEAM JAPAN :up: :toast:
what max FSB on Dual channel?
-
-
good excellent Junior result for the cost of memory, week that comes arrives mine cell shock ddr800 tambem goes to see if I obtain a result close to its
-
Quote:
Originally Posted by
revogamer
how do you like the P5K-E? im looking to get one atm. would u recommend it?
yep i like it
clean socket area and i think any heatsink will fit on P5K-E
very stable and easy to tweak
of course its not a Commando or Quad GT but its nice for overclock
i recomend it :)
Quote:
What was the max voltage you were running ?
CR 1T -> 2.55v :)
Quote:
what max FSB on Dual channel?
FSB?
on air E66 @ 525FSB and E6700 @ 540FSB
-
Quote:
Originally Posted by
dinos22
i've seen OPB do DDR1200 cas4-4-4-x with 1T
but no superPI so what's the point........i asked him but maybe he's too busy with all the hardware he plays i guess
show us some comparative superPI PLEASE
WOW 1200 @ CAS4 is a serious clock :),what mobo?
with more vddr i can get a bit more but for now i only have 2.55v :(
Quote:
show us some comparative superPI PLEASE
yep !
i will run some Pi & everest :)
-
Nice results, It seems new Adata rocks :up:
Quote:
Originally Posted by
wedfighter
nice result TEAM JAPAN :up: :toast:
WTF? :D
-
Quote:
Originally Posted by
PcCI2iminal
WOW 1200 @ CAS4 is a serious clock :),what mobo?
Asus P5K DLX , vddr 2.4 :)
-
554, so its older gmh, interesting
