my first mod!

So...like the thread is called,this is my first mod and.I decided to start moddin' my case one day when i was cleaning it and from there i had gone wild :D
I am sorry for the lack of pics in the modding stage but i fried my mobo and gpu card adn i am running with a Celeron478 until i will buy new parts :( .Anyway i hope u will like it,i know i sure do,being my first :smileysex:
This is what i used for this mod :
1 angle grinder
2 half meter mesh from a hardware store
3 drill
4 an old psu case for the hdd rack
5 4 wheels
This is how the case looked before
http://img402.imageshack.us/img402/8065/img1960ku0.jpg
http://img440.imageshack.us/img440/8/img1962ql0.jpg
http://img402.imageshack.us/img402/3259/img1970zi9.jpg
And this is what i did during the mod(once again i am sorry i haven't got any more pics of this stage)
This is when i made the right side panel...after i had cut the original panel
http://img401.imageshack.us/img401/2790/img2177bk3.jpg
And this is the left side already assembled
http://img408.imageshack.us/img408/9827/img2178yk2.jpg
http://img402.imageshack.us/img402/9904/img2179ie3.jpg
http://img402.imageshack.us/img402/3856/img2180hd9.jpg
And this is the front of the case after i have cut it and left only the sides so that i could put the mesh!
http://img409.imageshack.us/img409/738/img2181eb6.jpg
This is when i painted the case black
http://img408.imageshack.us/img408/3104/img2547lh8.jpg
http://img402.imageshack.us/img402/9652/img2554xb2.jpg
This is the hdd rack i made from the psu case.it has that 80mm fan for hdd cooling and i also made that side between the fan and the left side so the hdd can stay there
http://img408.imageshack.us/img408/372/img2551po7.jpg
http://img223.imageshack.us/img223/8140/img2552gr0.jpg
http://img402.imageshack.us/img402/28/img2553fc4.jpg
Also i cut a hole on the top of the case for a 120 mm fan,and there is also another 120mm fan in the front that i cut
http://img402.imageshack.us/img402/2007/img2565hp7.jpg
http://img402.imageshack.us/img402/3413/img2567rz2.jpg
And this is the case finished...during asembling
http://img440.imageshack.us/img440/5296/img2568cl2.jpg
http://img227.imageshack.us/img227/233/img2569pm8.jpg
And this is the case assembled.the only things i still need are 2 80mm fans to put in the back and 2 buttons(start and reset.For now it has only a start button)
http://img227.imageshack.us/img227/906/img2611fj9.jpg
http://img408.imageshack.us/img408/6094/img2612mt7.jpg
http://img409.imageshack.us/img409/3336/img2615ed7.jpg
http://img408.imageshack.us/img408/5936/img2617fr7.jpg
http://img408.imageshack.us/img408/6034/img2623mh2.jpg
http://img217.imageshack.us/img217/4504/img2626pu0.jpg
http://img209.imageshack.us/img209/1083/img2630os5.jpg
http://img408.imageshack.us/img408/5287/img2639pw7.jpg
http://img408.imageshack.us/img408/2439/img2641hk8.jpg
http://img209.imageshack.us/img209/2333/img2642cq8.jpg
http://img217.imageshack.us/img217/2181/img2643zj3.jpg


so this was my first mod.i hope u like it.The only thing i dislike about it is the paint that does not last :(.
Anyway i like it...and hope u will to
Thx!!!

a bit wild for my own personal tastes (I am pretty conservative when it comes to case mods--a paint job here, a window there) but I do like the work you did. Thanks for sharing it and congratulations on a completed mod!

Not bad, but I'm not really a fan of the all-mesh front and side for several reasons - aesthetics, noise levels, and dust. Plus, having completely open sides makes it hard to get any guided air-flow happening.

i would say that you did an excellent job considering this is your first case mod..:up:

gj, mesh isnt me but that doesnt mean it isnt a good job, so well done.

if the mesh panels didnt stick out so much it would look a lot better, but as the others said, it is a little on the wild side as far as my tastes go.

Great stuff.

First time ive seen some1 doing an All mesh mod.

Really unique!

Props for your first mod.:up:

You live and learn, only way to do it.

Take what you learned to do and not do with this one, and when the next one comes along apply your lessons there.

Quote:

---

Originally Posted by phelan1777

Props for your first mod.:up:

You live and learn, only way to do it.

Take what you learned to do and not do with this one, and when the next one comes along apply your lessons there.

---

words of wisdom ;)

Quote:

---

Originally Posted by phelan1777

Props for your first mod.:up:

You live and learn, only way to do it.

Take what you learned to do and not do with this one, and when the next one comes along apply your lessons there.

---

as with everything :P, live and learn

First of all i want to give a big thx to all of you.I'ts been a pleasure sharing my case mod to u.And as i said before i am sorry i haven't got any more pics to show u from the moding stage but when i fried my mobo all the pictures where on the desktop and they all...went away for ever:(
And now to explain my mod a little better because this morning when i started the thread i was a bit in a hury but still i was anctious to show my work.
First of all,i belive u all noticed the left side panel of my case witch has been extended(it is now 2 cm wider).This is because my case was very small to begin with,and my sonic tower was hitting the old side panel and that for me was unacceptable.
The second thing i want to say is about the mesh.At the time when i first thought of this mod i wanted to use plexi but this was much easier to think of than to do because i live in Romania and plexi here is very hard to find and also very expensive,not to mention pc modding is at it's very begining here...very few shops in the hole country have modding stuff for sale,and those who have only sale a few things(also i want to say that u can't find anything for case moding eccept fan grills and lian li wheels).Also here in Romania water cooling is almost unknown.Anyway...about the mesh...this was the only one that i could find that i liked and also it looks very sexy i think(i know air doesn't flow so well trough the case but this will have to do for now)
Also i want to say that working with this kind of mesh is very hard because it is very hard to bend.
here are some pics of how the mesh looks when u buy it
http://img408.imageshack.us/img408/4395/img2644ks1.jpg

http://img441.imageshack.us/img441/4094/img2645zo4.jpg
And one more thing i want to say i also don't like and i think i will take off is that AKSA cable management for the psu cables because it makes the wires very hard to work with and it gives me almost no possibility no hide hide them and u can all see what a mess it makes inside my case,not to mention it messed up the air flow inside the case.:)
These been said i want to thank u all again and i want to say that i am open for questions.

/////EDIT:here are some more pics that i've taken of the case

http://img265.imageshack.us/img265/8817/img2647jv6.jpg

http://img265.imageshack.us/img265/5639/img2648aa5.jpg

http://img265.imageshack.us/img265/4104/img2649rx5.jpg

http://img252.imageshack.us/img252/6411/img2650rj6.jpg

http://img405.imageshack.us/img405/8328/img2653je0.jpg

http://img252.imageshack.us/img252/1808/img2656sa9.jpg

Quote:

---

Originally Posted by Solarfall

i would say that you did an excellent job considering this is your first case mod..:up:

---

second that!

really nice first mod

Quote:

---

Originally Posted by OCFX

second that!

really nice first mod

---

THX guys...u really make me feel so good knowing that i am not the only one that like's my case.

Next i have a cube project in mind,that i want to build from the ground up,and it will also be watercooled.But i don't know when this will happen because i will have to get a job and i don't know if i will have the time:)
I like to dream a lot...and also i like to make my dreams come trough:up:

Maybe you could try to hide at least some of the wires. Some clear plexi on the side panel so the fans wouldn´t suck dust so much in the case.:)

Doesn't look that bad at all considering it is your first mod. :)

Quote:

---

Originally Posted by kiikkuja

Maybe you could try to hide at least some of the wires. Some clear plexi on the side panel so the fans wouldn´t suck dust so much in the case.:)

---

yes i said i am gonna take those covers off the psu cables so i can hide the wires.About the plexi...i tried to find some but i couln't...maybe on my next project

Quote:

---

Doesn't look that bad at all considering it is your first mod.

---

THX:up:

Sorry...missed that part altogether.

super cool:D
naspa ca laterala cam iese in evidenta;)

Thank you buddy :)

Pai laterala iese in evidenta,chiar asa a fost si gandita ca sa incapa sonic tower-ul in ea :rofl:...oricum carcasa asta sta de ceva timp pe sifonier :D

You know thats not bad for your first mod. My first mod was adding a fan! lol. but you'll notice that as you go you get more experience, you get alot more picky about things, and they have to be absolutely perfect. And that the projects seem to take longer and longer, because the mods get more and more elaborate.

Well thank you :) well this unfortunately was my first major case mod since then because now i am lacking the time and the place to do this mods.And i think about something i would like to do every day but i can't :(
I am hoping that in the near future i will be able to do another major mod :)

Quote:

---

Originally Posted by RealRedRaider

How is your airflow???

That mesh looks kinda restrictive???

---

For air? :rofl:

Nice mod bro!

Lookin good :up:

Quote:

---

Originally Posted by OCFX

second that!

really nice first mod

---

agreed, eveyone has to start somewhere lol, and he did the best with the things available to him. surely thats all that really counts:clap: