If you don't need Xfire or SLI then this is the mobo to get!

I just got this mobo in and the starting test are mind blowing.
The mob is a Gigabyte GA-MA69G-S3H (rev. 1.0) and Newegg has them for $87 using a AMD 690G chipset and is a full ATX.

The quick tests are with memtest86 and the max HTT I was able to post and run memtest86 with out problems was HTT435 :eek: . I was looking for HTT300 so Ill take HTT435 any day. The NB gets hot so a better heatsink or a fan is needed for OCing on this mobo.

Heres a link to this mobo at Newegg.
http://www.newegg.com/Product/Produc...82E16813128052

taa for find was looking for a cheap good mobo like this :)


shame it's not in UK yet lol

can i get a screen shot of the 435?( i believe you, but i just want to see it)

That's just insane! Show us a screenie!

It's in stock at www.mamoz.no if there's any norwegians wanting it! Costs only 795 NOK.

Seriously considering it! SHOW US A SCREENIE!!! ;)

I don't have a camera right now but I see if I can get a small HDD with windows 2000 on it and get screen captures for you. I don't know what is the max HTT for running OS is but Ill find out.

Here you go. This is the best I could get in windows stable. I found out the clock gen really gets hot over HTT300 and need a fan or heatsink if OCing.
http://pic15.picturetrail.com/VOL601.../259325199.jpg

yea, i think i am going to buy this board, it looks nice

If you get this mobo you need to know that the memory control setting are hidden and you need to hit Ctrl + F1 to show them in BIOS. The other thing to get high HTT is to lower the HT signal strengths in the hidden area to 3 up and 3 down.

i might just as well buy this one...

it has a built-in gpu with vga and hdmi port that supports hdmi audio. the onboard gpu is even overclockable via the bios!!!
but DOES the onboard gpu support h.264 decoding!?!
spdif optical and oldschool parallel ports?
if it had a serial port, it would cover everything

it also supports SURROUNDVIEW technology – a feature that allows ATI RADEON 9100 IGP-based system to work with up to three displays when an additional AGP graphics card is installed and integrated core is functional.

the onboard gpu sucks for gaming, but it's still a gpu. so in case ur 8800ultra or 2800xtx dies because you thought the memory coudl do 3GHz, you can still play quake3 or CS 1.6 on your onboard video!

it DOES support crossfire. interesting to see how crossfire would perform at 4x, but that second slot DOES support a FULL LENGTH card at 4x and you CAN run Crossfire!!

"Dual PCI-E graphics interfaces to support ATI CrossFire technology"

http://www.gigabyte.com.tw/Products/...e=GA-MA69G-S3H

My questtion- can u run a regular single or just a secondary card there without crossfire?

I have a better suggestion http://www.newegg.com/Product/Produc...82E16813136021

Quote:

---

Originally Posted by nn_step

I have a better suggestion http://www.newegg.com/Product/Produc...82E16813136021

---

how loud is its hsf?

argh!! so many choices.

I know i want a brisbane 3600 x2
:shrug: BUT WWHATT MOBO!?!!? :shrug:

wholly balls, that is great.

after all these crapola clocking Gigabyte AM2's..

Wait till alphaOne sees this :rofl:



now more importantly, how do all the ram dividers behave, whats the power supp like.. etc etc

Avoid DFI if you're going with Brisbane, the headaches of getting them to work with the damn 65nm processors are more than its worth.

Damn thats a nice board
Now Im stuck to choice a mobo;
The Gigabyte GA-MA69G-S3H or the Biostar TA 690G :shrug:

I have booted up with a video card in the PCI-E 4x slot as the primary video with out any problems.

The screen shot was with the mem divider at DDR2 400 and it was with a Enermax 600W noisekiller. The northbridge heat sink need help when overclocking by replacing it with a better one or by adding a fan to it.

SnipingWaste What is the max voltage for CPU\RAM set in BIOS?

Quote:

---

Originally Posted by Serj_Over

SnipingWaste What is the max voltage for CPU\RAM set in BIOS?

---

I think its +.55V for the CPU and +.5V for the memory.

Woha, maby ill get one just for fun :D

Quote:

---

Originally Posted by nn_step

I have a better suggestion http://www.newegg.com/Product/Produc...82E16813136021

---

i had this board it does not overclock as good as the ultraII-m2, it oced worse than my tforce 6100

Quote:

---

Originally Posted by SnipingWaste

I think its +.55V for the CPU and +.5V for the memory.

---

I made a mistake about the voltage for the memory. Its +.6 and not +.5. The would put a max of 2.4V for the memory.

My mATX just died on me :(, so i might try this if it comes to DK

Quote:

---

Originally Posted by nullface

My mATX just died on me :(, so i might try this if it comes to DK

---

If you need a mATX Gigabyte has one that should be out very soon based on the full ATX ver called the Gigabyte GA-MA69GM-S2.
http://www.amdcompare.com/us-en/exte...il.aspx?id=226

I might have a look at that, or the ABiT AN-M2HD, thanks :)

SnipingWaste is it OC'ing from BIOS or by clockgen?
What is the stable max for your Brisbane on this board?

Quote:

---

Originally Posted by Serj_Over

SnipingWaste is it OC'ing from BIOS or by clockgen?
What is the stable max for your Brisbane on this board?

---

All from BIOS.

I do more testing when I upgrade my system with the same mobo. This first one was for my fathers system upgrade and Im not missing with that system any more. I upgrade my system in about a month and I do some high end tweaking on that one and see what the mobos max is. The realy nice thing in the BIOS is the HT signal drive strength setting that allow for the high HTT.