Another P5K & E6700 from Team Japan: SP8M@5.4G = 1m56.890s

5:6 async mode of P35 chipset gives me a SP8M temporary-quasi-WR, 1m56.890s :)
I'll try 32M in next time...now remaining LN2 is not enough for long run...

# I have also P5K-Deluxe, but my P5K-D is VERY unstable under LN2-cooling:(

M/B: ASUS P5K, BIOS: 0414, Mfg Lot:74M
CPU: Core2Duo E6700 SL9S7 L633A549 (sub lot: 35631556)
CPU Cooling: LN2 by Kuri-Pro4
Chipset(MCH) Cooling: water-cooling
Head: Alphacool NexXxoS NBXS-A modded with NBX-i2's attachment
Radiator: Black Ice GT Xtreme 480 + SANACE 9G1212H1051 x4
Pump: Laing D-4 Basic DC-Pump Complete G1/4（DC drive）
Tube: innovatek tube Clear (In:8mm/Out:10mm)
Chipset(ICH) Cooling: water-cooling
Head: Alphacool NexXxoS NBXS-N
Memory: Team TXDD2048M1200HC5DC (1GB x2)
VGA: RivaTNT2 32/PCI
HDD: WesternDigital Raptor WD740GD
Power Supply: Zippy-850PE-modded
Vcore: 1.911V, Vdimm: 2.751V, Vmch: 1.598V,
Vfsb: 1.50V(setting in BIOS), Vio: 3.421V
OS: Windows Server 2003
Remarks:
Working table : V-TEC ARC Bed Rev2.0-mod
Motherboard Modified for: Vcore, Vdimm, Vnb
Thermal grease: Ceramique by Arctic Silver
4-4-4-4-4-30-10-4-4-E, 5:6, start-up FSB: 520
CPU Voltage Damper: Enabled
SetFSB 2.0.b.15f
Soft RAM disk(ERAM for Windows v2.11)
Windows start-up options: /numproc=1, /noguiboot, /maxmem=300
copy-waza

http://222.151.154.114/c-board/file/...402.38_5-6.png

http://222.151.154.114/c-board/file/..._2007Jun09.jpg

Very nice! :clap:

Kyosen-san Congratulations!!!!!! :up:

Good work kyosen :toast:

How far could you reach on the Deluxe board?

DDR2@648mhz 5/6 444 :eek:
Great result Kyosen and congrats for the WR :up:
Good luck for 32M :)

Congratz kyosen!!!

I have one question can u explain what vio above nominal 3.3V do to CPU, I suppose by rising Vio, some other voltages (some CPU related) rise also. And what about 12V and 5V can u share voltages for those 2 also?

Misko

Congratulations kyosen-san! Excellent combination of CPU and memory speed. Interesting maxmem value ;)

very very nice.. :)

:clap: :clap: :clap:

Yea, quite a few guys reported unstable behavior of p5k dlx under LN2. Anyone tried P35-DQ6?

Great work kyosen! :up:

go for 16M WR it should be not-so-hard for this setup!

impressive P5K and E6700

Good job Kyosen-san

Are you find vmod Vpll please ?

great work kyosen ;)
P5K is really nice board :D
@bob look here
http://www.xtremesystems.org/forums/...d.php?t=145583

Very nice :toast:

wow, P5K Vanila doin great..

True record !!!

Very Good job :toast:

Beautiful result and memory :D

Very nice setup and results

Get LN2 refill ASAP :p: and then push it further :D

Wow :clap:

awesome results ^^
congratz

How did you all (TeamJapan) find these CRAZY E6700's! There all amazing. Congrats.

I love that FSB and RAM mix :D

Congrats!

Good work kyosen OMEDETOU

Congratulation Kyosen, thanks for your support in our products

Awesome results Kyosen. Why did you enable /noguiboot, did this improve stability or allow you to boot at higher frequencies?

Many thanks to all, and sorry for too late replying:bows:

G H Z> How far could you reach on the Deluxe board?
--
I could see 5.25 SP1M run completed on P5K-D once...
I don't know why, but my P5K-D goes unstable under mere -40deg-C, unfortunately:(

C.h.r.i.s> Good luck for 32M:)
--
Yeah, I expect around 9m24s@5.3G with 5:6 mode...I need stronger DDR2 memory for more;)

Misko> I have one question can u explain what vio above nominal 3.3V do to CPU,
Misko> I suppose by rising Vio, some other voltages (some CPU related) rise also.
--
In my experience, higher Vio for P5K contributes slight improvement for stability at 32M run.
I couldn't complete 32M run at 530x7-5:6 with Vio=3.4V.
3.5~3.6Vseems suitable for longer SuperPI run on P5K, I think now.

Misko> And what about 12V and 5V can u share voltages for those 2 also?
--
I have not checked the infuluence of rising 12V and 5V so far.

boblemagnifique> Are you find vmod Vpll please ?
--
Not yet...I'll try later.
Though I tried Vcore, Vdimm, Vnb, Vsb-core, Vsb-chip, Vfsb so far,
I feel Vcore & Vdimm mods are enough,
and Vfsb-mod with usual LM324 grounding method has negative effect, so not recommended:(

Stapler> Why did you enable /noguiboot, did this improve stability
Stapler> or allow you to boot at higher frequencies?
--
Just I want to reduce main memory usage a bit, but it may have little effect;)

And I'm very glad to see duck-san here, many thanks!!!
We hope we will see your awesome run again in 'appropriate' future:up: