Testing begins (littledevil pots/ln2)

Just received these units from little devil to test for him

As you can see there is one gpu(not a LD) and 3x CPU (all LD)

One is just a standard LD pot no centre pole all aluminium

Second aluminium one has a centre poll

Third copper base no centre pole

below is the copper base unit on a QX6700@4.55ghz

http://www.net7.info/1/ln2pots/IMG_0170.jpg

http://www.net7.info/1/ln2pots/littledevil/DSC00521.jpg

First up some 3D06 CPU tests with the copper pot

QX6700@4550mhz, 1.75v, 2:3 4.4.4.12 /2.55v

test run at -118/-125 on Asus Commando vmod/vdrop

http://www.net7.info/1/ln2pots/littledevil/06cpu2.jpg

http://www.net7.info/1/ln2pots/littledevil/06.gif

so far only the copper pot has been mounted and in this case -120

tomorrow i will run some 06 with the gpu pot mounted on a 8800gtx

then i wil try each pot with X6800

i ran some single card 3D06 tonight and it went very well

the CPU pot(copper) held very well @4547mhz

Quote:

---

5. 3Dmark 2006 - 17124 marks - bazx (OC Forums) - [#5 in 3Dmark 2006 with a single graphic card] - (Geforce 8800 GTX @ 841/1207mhz

---

i managed to take some lil movies with my camara but it was a bit tricky the camera only takes 15sec clips

you can get them here

http://www.net7.info/1/ln2pots/littledevil/movies/

http://service.futuremark.com/compare?3dm06=1606107


setup

http://www.net7.info/1/ln2pots/littledevil/DSC00534.jpg

Nice work baz... sounds quite loud though... is the cascade running too?

Quote:

---

Originally Posted by Brettbeck

Nice work baz... sounds quite load though... is the cascade running too?

---

no cascade his time:D

it was real strange benching without the noise from the cascade

Nice! But watch out with the frost!

Quote:

---

Originally Posted by bazx

no cascade his time:D

it was real strange benching without the noise from the cascade

---

Hehe :D. On the videos it just sounds like something is runnning. It's a loud humming sound. You should publish your CPU score on the ORB baz... then there will be someone from the UK up there :).

@ Noob-ftw - Don't forget that with LN2 the PCB will be so cold that any water vapour making contact will freeze instantly, so I think the only problem would be if he left switched the rig off and just left the pot mounted.

Can you say that safely? I wouldn't risk it and put some armaflex and tissue papers over there :)

nice setup and scores m8. looks like your having fun :)

Nice work! :toast:

looks good

interested how it all pans out

Nice testing m8 :toast: im quite curious how my Gpu pot will perform.

hehe and some more tonight i changed cpu to a X6800 to run some 3D Still on copper base -120

ALL Single Card 8800GTX 851/1223

http://service.futuremark.com/compare?3dm05=2878124

http://www.net7.info/1/ln2pots/littledevil/05.gif

260154 - X6800 @ 5063MHz, 8800 GTX 851/1223 (single gtx)


http://www.net7.info/1/ln2pots/littledevil/am3/260.jpg

and some 3D01

87778 - intel X6800 @ 5063mhz 8800gtx @ 851/1223 (single gtx)

http://service.futuremark.com/compare?2k1=9178258

Wow some nice results there Baz, way to go mate will watch this with intrest.

Quote:

---

Originally Posted by sacha35

Wow some nice results there Baz, way to go mate will watch this with intrest.

---

i am have way to much fun with this pot i dont want to change it for another:D

but i must get on and do some testing

Quote:

---

Originally Posted by bazx

i am have way to much fun with this pot i dont want to change it for another:D

but i must get on and do some testing

---

All the best of luck mate, fingers crossed for you, looking for some WR with the setup or very near.

If Baz says he doesn't want to change a pot and is saying ''im having way too much fun'' then that sells it to me and im sure the grin on his face has nothing to do with a female insight or the net for that matter


Plus anyhting i have seen from LD is pure sex it's a multi 100% both ways

Quote:

---

Originally Posted by Brettbeck

Hehe :D. On the videos it just sounds like something is runnning. It's a loud humming sound. You should publish your CPU score on the ORB baz... then there will be someone from the UK up there :).

@ Noob-ftw - Don't forget that with LN2 the PCB will be so cold that any water vapour making contact will freeze instantly, so I think the only problem would be if he left switched the rig off and just left the pot mounted.

---

Ah good point. Just seeing frost on electronics scares me though. :stick:

Beautiful container with beautiful results. :up: Congrats baz and keep going. :D

Quote:

---

Originally Posted by Noob-ftw

Just seeing frost on electronics scares me though. :stick:

---

I don't really think it's the frost that causes problems. It's when the frost is able to warm up just enough for it to start melting, then you'd have problems :p:. As long as it's kept cold with the LN2 though it shouldn't melt.

Thanks bazx for really nice review :toast:

regards

nice work bazx...:toast:
Push 8800 gtx little harder im sure on ln2 card good for
atleast 900mhz

Quote:

---

Originally Posted by Dynasty

nice work bazx...:toast:
Push 8800 gtx little harder im sure on ln2 card good for
atleast 900mhz

---

maybe you are right :D

i am running the gpu at -70 right now but next time -90

@little devil it has been a pleasure to work with your pots
and will soon try the others