Printable View
I just got an MCR220 from newegg. From the spec., this radiator uses NPT 3/8" fittings for the inlet and outlet. I tried the Aquaxtreme High-Flow fittings (G 3/8") but they won't fit. The diameter of the Aquaxtreme fitting > MCR-220 inlet/outlet diameter. However, I tried the EK High-Flow fittings (G 1/4") and they fit perfectly. Check for leak and no problem either. What gives?
I went to home depot and picked up some 3/8" MIP brass barbs, got some teflon tape on the threading and it went it perfect. No leaks(thank goodness because it is mounted above my mobo inside my case):D
From Petras. http://www.petrastechshop.com/swmcqposerab.htmlQuote:
• Convenience, Reliability, Quality, Competitive Prices
- 1/4" NPSM threaded hubs, for maximum compatibility with various tubing installations.
Yeah, Swiftech just changed the MCR220 from 3/8" NPT to 1/4" NPSM. Heck, when we called 'em about it, Gabe didn't even know that the change had been made :rolleyes:
The good news, however, is that you can now use 1/4" BSPP barbs in the MCR220 (DD barbs, Swifty barbs, etc.).
thank you for the timing of this thread, lol, was just about to order a MCR220 but delayed bc I had to figure out which non plastic barbs were going to fit. Petra you have an order coming very soon! :banana:
peace
Ahh I see. Yes, I distinctly remembered my MCR220 being 3/8", and was a little confused by the 1/4" on your site.Quote:
Originally Posted by Petra
But I just took it as being correct and my memory being blurred ;)
Makes it easier to find fittings for. I noticed the MCR320 on your site is still listed as 3/8" NPT, are those getting switched over soon as well?Quote:
Originally Posted by Petra
I'm really not sure yet what Swiftech's plans are there... However, I do know that the 20 MCR320's that arrived today are tapped in 3/8" NPT.Quote:
Originally Posted by SparkyJJO
Alex, is 1/4 NPSM smaller than 3/8" NPT? If so, someone please go poke at gabe to get it changed back.
Yup, 1/4" NPSM is smaller than 3/8" NPT...by quite a fair margin (~12mm opening vs. a 15mm opening for barb insertion--I could look up the drill size for both standards but I don't have a lot of time right now).Quote:
Originally Posted by MaxxxRacer
My guess is that Swiftech changed it to avoid further incidents of human stupidity with regard to their kits (e.g. people forgetting to use PTFE tape on NPT barbs and causing problems).
Alex,Quote:
Originally Posted by Petra
Thanks for the info. Maybe I can save the Aquaxtreme fittings for a Thermochill upgrade. Are you going to stock them in the near future? ;)
Well, if Thermochill's official North American distributer ever gets some to send to us, then we will... *cough*hurryitupdangerden!*/cough*Quote:
Originally Posted by Walternowi
...though, if you ask really nicely, I do happen to have 2 or 3 PA120.2's left in inventory... :rolleyes:
How about if I promise never to buy ANY watercooling product from your competitors, will you let me have a PA120.2 at a good price? :DQuote:
Originally Posted by Petra
what competitors? :DQuote:
Originally Posted by Walternowi
been waiting for the mcr-320s to come back in stock at petras. Glad you guys finally got more in.
@petra- Do your Aquaextreme g3/8 fittings come with the tape or do i need to get some myself?
The AqX 3/8" BSPP fittings don't need PTFE tape--they're o-ring sealed.Quote:
Originally Posted by Sorrow13
@ Walternowi: Sounds good to me :p: ;)
Man I wish I could find these in-stock :(Quote:
Originally Posted by Petra