G.skill F1-3200phu1-512nt Review & Discussion

DDR 512 PC-3200
CL2.5-4-4-8 2.5V-2.6V
I hope they work as 2 GB set. 4x512. Testing soon.
Sticks cost 52 € for a piece.


http://img201.imageshack.us/img201/9...3270yw8.th.jpg

First with two sticks:

SPD values:
http://img212.imageshack.us/img212/542/spdgskillxw7.jpg

Edit: Mods , please edit Thread topic accordingly. G.SKILL F1-3200PHU1-512NT


by GST, topic changed , tnx


Edit2: 2x512MB , 3-4-4-8 , 2.8V (didn't try lower or higher voltage yet) , currently SuperPI32M calculating @ 241 Mhz.

http://img365.imageshack.us/img365/6428/241yg4.jpg

, .... and it finished. I have to put settings to manual and try with 4x512MB

I had to set Command rate to 2T to get these boot 4x512MB on DFI Lanparty NF4-D
2.8V:
http://img211.imageshack.us/img211/7199/gskillzw5.jpg


PS. CPU goes 3.1 Ghz with that Vcore.

Very worth the price I'd say!
My previous sticks were Buffalo Valueram 3-3-3-8 PC3200 2x1GB that maxed @ 216 Mhz :D
so these are much better. Thanks G.SKILL

PS. Edit. topic G.SKILL F1-3200PHU1-512NT REVIEW & DISCUSSION

Why I can't get dividers 166/200 and 180/200 to work with these?

It posts only with 1:1 (200) and I have to set 180/200 from Windows.

up for the question.

for divider question is more relate to motherboard and ram. if they dont like each other you can't do too much divider about it.

I've had 2 similar sets, both maxed out at 254Mhz @ 2.5-4-3-6, but I have to add that I didnt have much experience in overclocking ram at that time ;)