Printable View
Hello! This is my frist post hear at XS!
I thougt I share my results with my 4000+, And hoppfully give gianni-gt a run for his money ;) And hopfully find out my my mothermoard Freezes at 293FSb
http://valid.x86-secret.com/show_oc?id=135089 Validation!
Pi 1Mb
http://i30.photobucket.com/albums/c3...amnls24sec.jpg
Quick 3Dmark05 run...Firewalls, msn runing in the backround
http://i30.photobucket.com/albums/c3...20Pc/test1.jpg
X1950xt 256Mb 749/1071 1,575VGpu
yeah nice chip... how much volt for 3.5ghz?
gianni, may be you should get your hands on some 4000+ as well? :D
gianni-gt:1,55V 16C Cputemp. Cpu i from England, bought last summer. From England (Overclockers.uk) Tested 4 chips before i found this baby!
realy nice, go for WR... ;) how much you payed for the chip?
Around 1350Sek ~ 135 Us Including shipping! I will try for 3600Mhz on air, If we get winter hear amytime soon...9C Out now full storm...
BadNizze, I bet gianni will make an offer in next 24hrs :D
hehe, this chip would be a rocket under my new tuned fridge-chiller....
btw: 0626FPMW is THE stepping for A64 cpus now... i ordered a 3700+ with the same stepping... this chip make 3616mhz@1.568V also @ Air :)
What stepping dude?
Nice chip and great results :)
TaPaKaH: I hade tow if the same stepping, but sold the "bad" one last week The other one did 3ghz @ 1,45 primestabel 14H on epox gli, could have been bad mobo to, This Chip does this!
http://i30.photobucket.com/albums/c3...c/Sp2004-1.gif
BadNizze, Hay man i have a Kab1e 0626 FPMW also. :p: Altho mine isnt as nice as yours. Does 3ghz 1.45v as long as temps are nice.
Results Here Dude.
When it gets a bit toasty it will fail prime in under 10minutes :rolleyes:
4Qman yea mine don´t like temps above 52C, The last one was even worse above 50C was instant fail...
nice cpu.. With my 0626 FPMW i can't reach this results under water.
http://www.bilder-hosting.de/img/E7ZPM.jpg
http://www.bilder-hosting.de/img/EN9HN.jpg
PlanetDynamic: I cant´t see your pics Edit: Working know :) Very nice!
Is your X1950XT watercooled?
1350SEK is around 196$ (1$ ~ 6.87SEK) ;)Quote:
Originally Posted by BadNizze
Nice chip though. :)
4n0x:My X1950xt is coold with thernalright Ht-03 and 70Cfm fan. Great Cooler! 65C load during 3dmark05!
Higgins: Yea but we have much higer taxes (25%) in sweden so, the "value" of 1350sek is around 130-140 Us i think. That did sound a bit weird but I hope everyone understod what i ment ;)
where did you bought these 0626fpmw cpus ? :D
http://cgi.ebay.co.uk/AMD-ATHLON-64-...QQcmdZViewItem
Quote:
This is the last of my batch of KAB1E 4000+ processors, i've had around 15 of this same stepping and they ALL run 3.1+ghz with less than 1.425v some as low as 1.35v.
but I think the 0626FPMW 3700+ are better ;)
One hear in sweden at Shg.biz. And this one at overclockers.co.uk. Both Kab1e 0626 Fpmw´s! Check this tread http://www.xtremesystems.org/forums/...highlight=4000 The last 4000+ realy IS amazing :YIPPIE: just hade to use that simley!
I did some testing in this weekend. Trying to get 270*12 stabile, tested all volts from 1,4-1,6 but no go.... So I switched to lowest volt for 3ghz...I´ll give 1,25 a try tomorrow...Sorry for bad english
http://i30.photobucket.com/albums/c3...lowlowvolt.jpg
wow very nice! vcore for a cheap electricity bill :)
Hello
Maybe you guys can help me.
I would like to put together an overclocked system and by reading the forums, it seems that there are several motherboards that the users prefer.
I have never overclocked a system (have built systems pretty competent) and would like to get your opinions on what is the motherboard and ram to use since these are the main items that determine the speed.
I currently have (2) Intel Kentsfield processors and (1) Intel Core 2 Extreme Conroe X6800. I was planning on using all the cpu's but I guess it depends on how much each system would cost, seems to me they would be very expensive to set up and I may run out of money and only be able to use 1 or 2 of the cpu's.
If anyone can help me with the following:
1. Motherboard to use and would it work on either of the QX6700 and the X6800?
2. Ram:
3. Case:
4. Should I use air cooled or Water cooled?
Many thanks in advance.
Joe
562-716-2430
make a new topic @ cpu4you
@ the rest, dang this thing is NICE! I want one :D I wish my CCBWE 0607 would clock like that... 2.7GHz at the max...