http://tweakers.net/meuktracker/1357...-update-2.html
:D
testing in a sec :)
Printable View
http://tweakers.net/meuktracker/1357...-update-2.html
:D
testing in a sec :)
now if we can get a nvidia 680i version.
I could have swore that Alex stopped working on MBM5 long ago...Quote:
Originally Posted by lawrywild
Can someone translate that page? I don't even know what language it is...
-FCG
http://www.majorgeeks.com/Motherboar...e_2_d5261.html
Just looks like he decided to buy the same motherboard as me :D lol
there isn't a P5WDH option though
I used P4P800 and so far have CPU Mhz, Cpu Temp, CPU Fan Speed, 3.3v, 5v, 12v all working :woot:
MBM Update 2 + Coretemp plugin by FCG = :woot:
http://img178.imageshack.us/img178/7...empmbm5cd5.png
That's what I'm talking about! I am very close to a final release at which point the plugin will be available for download.
-FCG
:D :D :D I added an Option in the Settings Section/Voltage Configuration for the P5WDH and calibrated all the voltages to match mine multimeter..........
http://www.xtremesystems.org/forums/...1&d=1164989676
ThorLite please post your fan .ini please :)
It's Dutch and so am I :p: .Quote:
Originally Posted by freecableguy
To summarise it:
The maker of the program has siezed the production of this program for two years now, but he has updated it recently (because this guy bought a new mainboard and wanted it updated for himself, selfish guy huh!:p: ). You have to have MBM version 5.3.7.0 already installed, otherwise the update won't work. It adds support for the listed changes!
I havent touched the fan.ini settings in the config wizard i used the P4C800-E Deluxe option.
Quote:
Originally Posted by freecableguy
Dutch :D
AvK stopped developping MBM 2 years ago but now theres an update supporting some new hardware. MBM used to be THE prog to monitor and show temp/volt/rpm. Update @ MG website due to writers page bein down. Version 5.3.7.0. has to be installed first to be able to install this update. Changelog:
Updated:
* MBM 5 Core DLL : 5.3.7.2
Added:
* Intel ICH7 Support
* Intel ICH8 Support
* Winbond W83627EHG Support
* Winbond W83627EHF Support
Can you take some screenshots of how your fans are configured then please? :cool:Quote:
Originally Posted by ThorLite
Ok here are mine fan settings Fan 2 and 3 are the same.
Anyone who tried it with a P5B Deluxe, or maybe want to test it? :)
Nice find, lw and keep up the good work, fcg!Quote:
Originally Posted by freecableguy
Really looking forward to going back to MBM after trying out Speedfan recently, somehow I still love the detailed MBM high/low interface.
Arr finally a program we all know and love to use instead of an ANUS PROBE :clap: :banana: :woot: :D
i just cant get it working on my P5B Dlx.....i
anyone test it @ a p5w64?
Quote:
Originally Posted by Millyons
^^ :(
Definately causes problems with vcore on the P5B. I've gone back to the last real release. Works great for me. This, I suppose, really is just for P5W DH guys....
-FCG
MB Monitor v5.3.7.2 (P4C800-E profile selected)
- P5WDH BIOS 1602
- QX6700 quad Core2
This thing won't report core temps on my Biostar TForce 965PT, which has ICH8. :(
I saw something about needing MBM Update 3? Where is that?
Screenie:
http://img228.imageshack.us/img228/2...creeniegm8.gif
No temps reported. Followed directions in the readme (I think). :confused:
you are doing something wrong, i dont see any sensor 9, or 10, you got to turn on those sensors for c2d dts temps
I renamed them Core 0 and Core 1 as the instructions indicated. :confused:
Quote:
Originally Posted by Millyons
Enable sensors used for displaying the core temperatures selecting them, starting with 'Sensor 24' (with decreasing sensor numbers for additional cores), from the 'MBM 5 sensor' dropdown and then setting 'Should display board sensor' dropdown to 'Custom'. Remember, starting with version 1.1: Core 0 is Sensor 24, Core 1 is Sensor 23, Core 2 (if detected) is Sensor 22, etc. all the way down to Sensor 9 for Core 16 (again, if detected).