Looking for better timings for my CB 10th anniv ddr2

i have 4 gigs 2 are 10th anniv the other 2 are D9 fatbodies

here my timings in bios 800mhz
4-4-4-16-2-3-24-5-8-3.9

alos here in nvidia n-tunes settings

http://i107.photobucket.com/albums/m316/wcd26/ram.jpg

looking to get more speed if anyone has proven settings id like to try them

thanks
________
AROMED VAPORIZER

looking for help with a 24/7 stable setting for this ram
800mhz
4-4-4-16-2-3-24-5-8-3.9
________
Bmw 335 (1939 - 1941)

okay okay

is same timings @900mhz with 2.4v ok for 24/7 use
________
FORD MAVERICK PICTURE

are your rams active cooled? imo anything above 2.4 needs active cooling...

but hmm weird.. it should do cl3 at 800mhz~ with the 2gb 10 anni :D

users at my place are doing 900mhz 4-4-4-12 2.1V

Here my Crucial 10th anniv first testrun 2.35 Vdimm very easy !!

http://s3.bilder-hosting.de/img/11STB.jpg



Regards

SPLMANN

[QUOTE=splmann]Here my Crucial 10th anniv first testrun 2.35 Vdimm very easy !!



hey could you please post sub timings also

thanks
________
Vaporizer benefits

Quote:

---

Originally Posted by NightRaven

are your rams active cooled? imo anything above 2.4 needs active cooling...

---

i have a fan on them and good case air flow
________
The Apprentice Dicussion

http://drunken-student.co.uk/pics/pc...le/495_ram.JPG

Will pull timings off when I boot the rig next. Havent tightened them too much though, and the P5B vanilla seems to run em fairly slack. TRFC = 25 tho from memory.
Above run was with ~ 2.18v or so iirc.

Have pi runs @ 534 FSB 1:1 4,4,4,8 (again no work on sub-timings) @ ~2.2v should go higher, CPU cooling limited at the mo.

Orthos stable @ 450 FSB 1:1 4,4,3,8 w/ ~ 2.05v too on Abit AB9. Board runs MUCH tighter sub-timings than the P5B does too.