BEFORE benching Quent's E6600 > 4.9GHz [Spi1M=10.297s @4919MHz]

SYSTEM
CPU: Quent's E6600 6B2
MoBo: Asus P5B-DLX WiFi - bios 804
RAM: Super Talent T800UX1GC4
OS: Windows 2003 Server
HDD: Western Digital IDE 80Gb
Cooling: Cascade (R290+R170 refrigerants, 8082+7950Btu/h rotaries compressors, @ about -100°C)

Vcore=1.74V
Vmch=1.73V
Vddr=2.81V

Max suicide CPU-Z... The motherboard couldn't scale over this point.

http://beforeoverclock.com/images/E6600CPUZ@4948.png
http://valid.x86-secret.com/show_oc?id=137958

Max Spi 1M, 2M and 4M...

http://beforeoverclock.com/images/E6600SPI1M@10,297.png

http://beforeoverclock.com/images/E6600SPI2M@25,953.png

Always nice to see a Spi 4M < 1min :D

http://beforeoverclock.com/images/E6600SPI4M@59,922.png

Max PiFast...

http://beforeoverclock.com/images/E6...FAST@19,59.png

Thx to my bro Quent for lending me this CPU.

I'm waiting for a Biostar TForce P965 Deluxe which may arrived very soon. Thx again Quent... :toast:

good job before :)

tryed with more vcore ?

Thx dude!

I've tried to increase to vcore up to 1.79V but it really didn't change anything. As for the Vmch, the NB would make the system freezing over ~ 1.75V.

Nice work before now you need E6700 to get sub 10 seconds
________
vaporizer manufacturer

nice CPU :toast:
What it can do on air ?

Quote:

---

Originally Posted by kemo6600

Nice work before now you need E6700 to get sub 10 seconds

---

why a E6700 when a E6600 can do it :D

Skirms is right ;) I'm sure this chip could take me to the 9.XXXs but not with on that (dead) P5B... :D

@TaPaKaH: I don't know; I don't have any air cooler. May be Quent could answer if he read the thread.

Quote:

---

Originally Posted by before

Skirms is right ;) I'm sure this chip could take me to the 9.XXXs but not with on that (dead) P5B... :D

@TaPaKaH: I don't know; I don't have any air cooler. May be Quent could answer if he read the thread.

---

Haha! thats the real hardcore overclocker answer :p:

hey JOd3r you know me bro! :D

Have you tried over 2.0V vMCH? My board ran fine with 2.01V with Icewater (-2C), what cooling you're using on NB?

Impressive numbers before :toast:

Thx loc.o :)

@Boble76: I've tried with more Vmch, BTW the system is rebooting on a random basis while running with more than lets say 1.75V.

So guys, the P5B-DLX has died yesterday... I hardly need that Biostar of Quent's to arrive very soon now. :D

http://img329.imageshack.us/img329/4757/p5bregulue7.png

Nice job Before :) Stepping please?

before , send the card , it s surely reparable :D

i ve ever change this component on a MB and no pb :)

Are you serious skirms? Of course that's an interesting proposal :)

@cpulloverclock: Thx! Stepping of this chip is L629A950.

I got same issue with my p5b dlx, more vmch than 1.75v makes random reboots and usually no booting. Keep it going before, willing to see the results with biostar!!

Before, what revision your MoBo is / was? Too bad, hope you can fix it. :rolleyes:

Quote:

---

Originally Posted by before

Are you serious skirms? Of course that's an interesting proposal :)

@cpulloverclock: Thx! Stepping of this chip is L629A950.

---

i m not the only one that have ever repare a MB like that :)

the same component has explosed on a 8rda3+ due to a vdimm , and i ve replace it with an a7n8x's one

and hop it s ok now :D

Quote:

---

Originally Posted by before

Skirms is right ;) I'm sure this chip could take me to the 9.XXXs but not with on that (dead) P5B... :D

---

You need damn good modded mobo to reach 9.XXX coz sub 10s with E6600 just like 9.2s with X6800
________
Lexus GX

@JOd3r: Thx ! ;)

@Boble76: Mobo revision is 1.03G.

@Skirms: Of course I can imagine you are not the only one to have done that ;) BTW I don't feel enough self-confident to do this job by myself. I've tried to unsolder one of those tiny mos on an old ATI Rage 128 and it was pretty hard to do...

@kemo6600: yes a good one for sure... I guess a mobo that can run about 565FSB would be okay.

Quote:

---

Originally Posted by before

@Boble76: Mobo revision is 1.03G.

---

Same revision. ;) Should run nicely..vMCH >2.0V. It's strange that your MoBo is not stable over 1.75V ? Maybe it is the CPU...or RAM??
I've almost same CPU stepping, only last 3 numbers are different..L629A807
Dani's coming tomorrow to buy it from me and he will test my "old" (P5B DLX) MoBo & he's own E6600 with CO2..can't wait!! I'm afraid he's gonna make good damage in SuperPi. :)

Stay tuned and tell how your "project" continues..

Thx buddy!

hehe I wish Dani & you the greatest for this benching session. :) If I correctly remember you were too drunk to think clear last time; hey guys don't try to overclock yourselves! :p: I'm looking forward to see your results...

I've emailed the shop about RMA process and now waiting for an answer. BTW I'll travel to the city where the shop is located this week end... my parents are living there and I was supposed to go visiting them.

That Biostar of Quents was supposed to arrive today but as usual the French postal service is late -always on strike-... :cheer: That really suxx! :censored:

L629A531 under the same cascade :)

cant tell if i m MB limited or ram limited cause it s corsair 5400 UL 444 12 , not test 555
juste vcore and vdimm mod done

http://112233445566.free.fr/E6600/10.5.jpg
http://112233445566.free.fr/E6600/5000.jpg

Nice result before!!

:banana::banana::banana::banana:ING EVIL....

5 GHZ That is PSYKO......

Do you have a PCI Graphic card in it or a PCI-E ??