Another void warranty..... - lapping action done !!!

:p: Though my chip is doing this

http://img176.imageshack.us/img176/7...1m12172cu6.jpg

I decided to take a closer look to the IHS contact and found this

http://img142.imageshack.us/img142/9...ping001fp7.jpg

Not what I would call a fine contact - so took this CPU

http://img170.imageshack.us/img170/5...ping002cl0.jpg

and after some serious work it now looks this way

http://img156.imageshack.us/img156/9...ping003yq7.jpg

Thanks DAVE - nice lapping kit. Good luck to Your business !!!;)

Too late here now, will post some results later. :toast:

Nice shiny surface you have there. I'd never have the guts to do that to my CPU.

Are those the temps before or after the lap?

show us some results! yeah!

what hs/f has u at 16c ...wow nice

Quote:

---

Originally Posted by Noob-ftw

I'd never have the guts to do that to my CPU.

---

It's not a big a deal as you think, lapping is more safe than it is dangerous. Yeah, it voids the warrenty; but, you have to weigh that against the benefits, especially if the IHS is "out of flat" anyway. The IHS is thicker than you're probably thinking, and you're not really removing that much material from it.

8c system temp :nono:

Quote:

---

Originally Posted by DesertShooter

8c system temp :nono:

---

:slap: If I was in Your shoes I wouldn't bet $1000 that this is a fake....;)

But I'm sorry to confuse You all with the temps, but it's real - see here:

http://www.xtremesystems.org/forums/...96#post1818096

:toast:

come on man give us some results! I can't believe contact was that bad and you still got over 4hz!!

:D Just tried in my room at 21°C airtemp:

http://img125.imageshack.us/img125/2879/prime38ef0.jpg

Without lapping I was not able to get 3.8 dual prime stable..........;)

More to come when it gets frosty here again..............:p:

:toast:

WTF, my lapped E6600 with WC hit 60C load with 3.6Ghz and 1.4vcore. How gay :mad:

Quote:

---

Originally Posted by DarkSephiroth

WTF, my lapped E6600 with WC hit 60C load with 3.6Ghz and 1.4vcore. How gay :mad:

---

:( I'm sorry to hear this - indeed a bit too much........

will it run large FTTs priority 9 ?

Quote:

---

Originally Posted by Supertim0r

will it run large FTTs priority 9 ?

---

:rolleyes: Hm, never really tried. Large FTTs also stress RAM so I always chose small FTTs for maximum CPU stress........;)

:toast:

Quote:

---

Originally Posted by DarkSephiroth

WTF, my lapped E6600 with WC hit 60C load with 3.6Ghz and 1.4vcore. How gay :mad:

---

I have to hit my 6600 with 1.55v to get 3.3Ghz out of it. but, on water cooling it runs in the mid 40s 24/7 stable.

i dropped approx 5C off load temps after lapping it's now holding at 60C at 3.6GHz with 1.43V - aircooled with a TuniqTower120 :)

Quote:

---

Originally Posted by Pyr0

i dropped approx 5C off load temps after lapping it's now holding at 60C at 3.6GHz with 1.43V - aircooled with a TuniqTower120 :)

---

:clap: 3.6GHz with 1.43V on air is nice...... :toast:

thanks camouflage, i'd love to try benching in sub-zero ambients tho :) :banana:
is that the liquid metal alloy TIM? did it help temps much over say AS5?

Lol..

My Un-lapped, un-touched E6600, does 3924 Mhz, @ 1.62 Real vCore, Under water, with 64C Load temps.. Ambient around 22C...
Not 24/7 ofcourse..

24/7 is 1.46 Real vCore, @ 3590 mhz.. 47C Load @ 28-30 Ambient..:D.. (Mumbai is hot) -.-..

Thats a nice job/finish on that cpu. Was debating the other day to lap my cpu but don't want to void the warranty.

Quote:

---

Originally Posted by goldenfrag

Lol..

My Un-lapped, un-touched E6600, does 3924 Mhz, @ 1.62 Real vCore, Under water, with 64C Load temps.. Ambient around 22C...
Not 24/7 ofcourse..

24/7 is 1.46 Real vCore, @ 3590 mhz.. 47C Load @ 28-30 Ambient..:D.. (Mumbai is hot) -.-..

---

:eek: wow nice temps are they measured with coretemp while running TAT or orthos small ffts?
my IHS was quite concave, and had bad contact, i just *had* to lap it :p:

Wow :slobber: www.easypckits.com is a great site! :D

Quote:

---

Originally Posted by Pyr0

thanks camouflage, i'd love to try benching in sub-zero ambients tho :) :banana:
is that the liquid metal alloy TIM? did it help temps much over say AS5?

---

:D See here - temps under load:

http://img355.imageshack.us/img355/8413/clyl4.png

:toast:

Quote:

---

Originally Posted by Peter949

Thats a nice job/finish on that cpu. Was debating the other day to lap my cpu but don't want to void the warranty.

---

From my experience, cpu manf. wont RMA your broken chip if its due to overvoltage, and CPUs never break themselves, so they could just have like no warranty at all and it'd still be good. :cool:

Quote:

---

Originally Posted by Peter949

Thats a nice job/finish on that cpu. Was debating the other day to lap my cpu but don't want to void the warranty.

---

:confused: Are You OCing Your chip? Yes? Ha - warranty already broken even without lapping.....:stick:

:toast:

Quote:

---

Originally Posted by goldenfrag

Lol..

My Un-lapped, un-touched E6600, does 3924 Mhz, @ 1.62 Real vCore, Under water, with 64C Load temps.. Ambient around 22C...
Not 24/7 ofcourse..

24/7 is 1.46 Real vCore, @ 3590 mhz.. 47C Load @ 28-30 Ambient..:D.. (Mumbai is hot) -.-..

---

Damn nice temps. My untouched 6600 is only running 3.1 with 1.31v set on bios and my load temps is at 55C running Orthos Small FFTs'... Guess the Big water SE is not enough for this... I should really turn on my ghetto chiller:stick: