Anyone running a week 31? What sort of clocks are you getting?
Just had a 6600 631A998 drop into my lap so I thought I would take it for a spin.
Printable View
Anyone running a week 31? What sort of clocks are you getting?
Just had a 6600 631A998 drop into my lap so I thought I would take it for a spin.
test it and report it for us.... :D
thx
Yess run it !!!
Exactly, that is the only way to know :) .Quote:
Originally Posted by andre X_X
Will do.
Running a Week 29 at the moment on a Badaxe that will run 3.5 at default voltage and 3.8 with 1.5v or maybe less. Not had it long but my current is a sweet chip that should do an easy 4.
I have a P5W64 WS PRO coming tommorrow and possibly a BadAxe 2 so I will wait until then.
Quote:
Originally Posted by The Asgard
I'm considering those two boards. I have seen live p5W64 WS PRO performance and i can confirm that's one of the best boards right now and very solid.
But i would like to know more about BadAxe2, it seems to be a great performance also, without coolboot and any Vdroop on CPU.
Please give feedback once you tried both boards. I will be watching... :toast:
I just got a 631A847 too. My temps are are like 50 idle and 70 load with a stock heatsink, so got to wait until I get a decent heatsink before I try to stress test it.
I got my L631A775 today, I managed 3.2 @ stock volts and I'm currently testing it with Dual prime @ 3.6 with 1.45vcore (1.51 set in bios). My idle and load temps @ 3.6 are 44C and 62C with my water cooling, but I think it's missreporting since my water is sitting @ 60f with my mini chiller.
Please some pic of ortos at 3.6ghz vith voltage.Quote:
Originally Posted by Luis_GT
L631A784
P5B Dlx
1.55 bios (about 1.5v Probe) 1h orthos OK - 76c core temp load with Infinity
1.625 bios (1.55v Probe) 10ish min orthos - 82c core temp load
i just tested it and took it out since a L627 that i have it does need bit more voltage to run same speeds but its quite a bit cooler
So what week do 3.6ghz with 1.45V-1.48V ortos stable!Deam 28B week is 100% best so far.
My E6600 L630 do Orthos +8h @ 1.44V 3.7GHz ;)
yap.
Some pictures of that,please.And can eny L630 do that?Quote:
Originally Posted by Dani
OC isn't guaranteed... ;)
Is some one else have good 30week here?Quote:
Originally Posted by JoeBar
Could everyone post their max oc with 1.6v?
My week 23 hits 3.73GHz.
I'm thinking of buying a new week 31 E6700, but only if it will give me some improvement.
Quote:
Originally Posted by Spacemaster
My 27A, will do 3.6Ghz at 1.43v (bios) Dual Stress Prime Stable :D
Pictures of that,please.Quote:
Originally Posted by DeToNaToR.cl
E6600 week 31,
Bad Axe .306
got to 3.65 Ghz on 1.400 volts, 43c Idle 56c Load but got memory related errors...
I think I must get faster Ram before I try bench at 3.65 and see how much further
I can push this.
Deam have eny1 eny pic.Ok I need picture of cpu test 3Dmark 06 with cpu voltagbe and cpu frekvenci.To meny words are here,and no eny pictures.I can say "I have 6600 4.5ghz stable with 1.23V",no one can belive that,onley with one screnschot you people can belive me.Thanks!
Some teaser for you SpiceMaster, take it easy, your on fire lika an chilli :p:
Will do some +8h Orthos...
Dropped Vcore from BIOS to 1.385V, PC ProbeII shows 1.41V but measured with DMM 1.435V from mobo :stick:
http://koti.mbnet.fi/dani69/ASUS_P5W...re_+30min..gif
SS is really crappy because Im using a PCI vcard for the moment :DQuote:
Originally Posted by Spacemaster
CPU is at 1.43Xv from bios and vdimm is 2.3v..
http://xs108.xs.to/xs108/06441/3600Mhz.JPG.xs.jpg
Just run it like for 20min.. got bored after that :p:
Thanks mates.
Im currently running on E6600 with L631 batch.
Running stable on P5WDG2 WS PRO on BIOS 1.4v with Overvoltage of the board of 0.5v its 1.45vcore.
Runs good but the temperature on Core Temp is bad. Cooled with water.
Idle: 55 :stick:
Load: 62 - 64