Simple SLI/CF containers rev. 1.1

Hi

It's SLI/CF containers kit for massman :) . They're almost same as mine previous kit : http://www.xtremesystems.org/forums/...hlight=piotres , only insulation is 9 mm now (for SLI setups), and base in bit another - now it's custom cooper plate, not just cap like in first kit :D .

http://www.members.lycos.co.uk/piotr...s/SLIplate.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/1.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/2.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/3.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/4.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/5.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/6.jpg

http://www.members.lycos.co.uk/piotres2/slipots1/7.jpg

I hope You like it :)

Regards
Peter

Very nice job piotres. I have one very similar to fit single space mobos, but didnt put as much into as you did. Massman should love those!:toast:

Can you show insulation of the mounting/gpu head part? Wouldn't such mounting design run into condensation problems?

Quote:

---

Originally Posted by kiwi

Can you show insulation of the mounting/gpu head part? Wouldn't such mounting design run into condensation problems?

---

I haven't mounted them, I have only PCI (non -e) GPU card at home :( :p: .

After screwing container to GPU, You must use some armaflex to insulate space between container and GPU :) .

Peter

Great work indeed :)

Containers will be used 3/11/06 & 4/11/06 when benching the 7300gt's.

And finally that has happend ...rev 2.0 :D

Change (cosmetic ;) ) :

- base is now 70 mm wide (rev. 1.x = 60 mm)
- better polish of whole pipe ;)
- insulation for pipe made from one piece

Containers has been made for "ATI fanboy" ;) , so insulation is 19 mm thick ...between CrossFire cards is a bit of space :) .

Rev. 3.0 will be having holes for GF 8x00 series for sure :cool: ...that can have them too ..only bit of work with drills :fact: .


http://www.members.lycos.co.uk/piotr...irev2/draw.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/1.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/2.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/3.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/4.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/5.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/6.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/7.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/8.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/9.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/10.jpg

http://www.members.lycos.co.uk/piotres2/slirev2/11.jpg

Regards
Peter

Hi

REV 2.0 LIGHT :toast:

Same as rev 2.0, only difference is thickness of cooper plate ("back wall")brazed on the half-pipe - 5 mm in "full" version, and 0.3 mm in "light" version :D . Weight of whole container is lower, price too :D .

http://www.members.lycos.co.uk/piotres2/rev2light/1.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/2.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/3.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/4.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/5.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/6.jpg

http://www.members.lycos.co.uk/piotres2/rev2light/7.jpg

That container has already drilled holes for GF 8 series, but that don't look very good (too small base) :( - but will be working on GFs 8 for sure :toast:.

I need bigger base to drill nice looking holes for GF 8xxx ...REV 3 is comming :toast: .

That kit is for sale, shoot me PM if You're interested, price is very good ;)

Regards
Peter