Another E6600 dry ice session, 100% overclock

Printable View

Show 100 post(s) from this thread on one page

10-02-2006, 12:32 PM
epox4life

Another E6600 dry ice session, 100% overclock

Progress so far about 30mins into the session. Will keep updating with more results.

E6600 OEM week 27, 1.93vcore @ 4.848ghz = vcore mod
G.Skill PC2-6400 HZ's @ 2.64vdimm = vdimm mod
P5B-Deluxe with HR-05 NB cooler

http://star.walagata.com/w/fetuskiller/10.578sec.PNG
10-02-2006, 12:40 PM
bachus_anonym

Can I say, below 11m00s in 32M is up next? :up: Very nice epox, I'm tuned in :toast:
10-02-2006, 12:47 PM
mykeos

must say I admire your courage.Running 1.9v through 65nm chip is a bald thing to do,although you can ruin 3 E66's for the price of one X68;)
10-02-2006, 01:03 PM
DEVIL K-ce

Man - You are crazy with vcore adjust :toast:

Congrats for You :)
10-02-2006, 01:07 PM
Zardokk

1.9v + E6600 = dead chip. Nice results, though.
10-02-2006, 01:09 PM
epox4life

Quote:

Originally Posted by Zardokk

1.9v + E6600 = dead chip. Nice results, though.

I've done the same vcore on phase with two different chips. ;)
10-02-2006, 01:42 PM
Shark-357

Awesome overclock mate, go for 2V and 5000Mhz :devil:
10-02-2006, 02:02 PM
epox4life

Board went down for a while due to condensation but a hair drier blowing on the socket for 2mins or so brought it back to life, maybe I should use more DE in the socket this time.
10-02-2006, 04:50 PM
Zardokk

Quote:

Originally Posted by epox4life

I've done the same vcore on phase with two different chips. ;)

Well not instantly dead, but if you ran it like that for a prolonged period of time, your chip would be dead real quick.
10-02-2006, 05:18 PM
Gautam

Quote:

Originally Posted by Zardokk

Well not instantly dead, but if you ran it like that for a prolonged period of time, your chip would be dead real quick.

Who runs dry ice for a "prolonged period of time"? ;)
10-02-2006, 06:01 PM
Zardokk

Well nobody I don't suppose. But still, 1.9v has to be hard on that thing.
10-02-2006, 06:20 PM
erwinz

xtreme voltage man.. :D
10-02-2006, 07:16 PM
Nanometer

Holly :banana::banana::banana::banana:.. Xtreme vcore! That's the highest I think I have seen. but honestly, let's see that 2.0 Vcore w/ 5000MHz core clock;)
10-02-2006, 08:53 PM
jozzy

man that's verynice.. how bout the highest clock in 1,7v vcore? anyone?
10-03-2006, 01:20 AM
epox4life

Chasing the 10minute mark and run out of dry ice...

http://star.walagata.com/w/fetuskiller/11.03small.PNG
10-03-2006, 11:26 AM
bachus_anonym

Haha, I'm getting better and better with those predictions :lol: It does look like ~4.8GHz and you'd probably the 2nd one (after kyosen) to break 10m mark on non-X6800 CPU. You've already had the best time on E6600 and quite safe & ahead of anyone else :up:
Awesome stuff and good luck, man :toast:
10-03-2006, 11:58 AM
wittekakker

Quote:

Originally Posted by Shark-357

Awesome overclock mate, go for 2V and 5000Mhz :devil:

Maybe LN2 on both the MCH and CPU is what he need to get 5gig.
10-03-2006, 12:05 PM
corvus_corax

Great clocks :clap: Awesome Vcore.
:toast:

Quote:

Originally Posted by jozzy

man that's verynice.. how bout the highest clock in 1,7v vcore? anyone?

With my L625 i hit 4.3Ghz 32M stable on phase (SS, around -17ºC) in a P5B without vdroop and vcore mod, in DI (+ good container) i think is possible to reach at least 4.4 GHz with the same vcore without mods, but it depends of the CPU, some folks have hit good clocks with SS, so with DI + Xtreme Vcore :D :slobber:
10-03-2006, 12:36 PM
epox4life

Quote:

Originally Posted by corvus_corax

With my L625 i hit 4.3Ghz 32M stable on phase (SS, around -17ºC) in a P5B without vdroop and vcore mod, in DI (+ good container) i think is possible to reach at least 4.4 GHz with the same vcore without mods, but it depends of the CPU, some folks have hit good clocks with SS, so with DI + Xtreme Vcore :D :slobber:

If you havn't seen my results on phase check it out, you just need more vcore. http://www.xtremesystems.org/forums/...d.php?t=117518
10-03-2006, 12:49 PM
J0d3r

Damn... 32m with 4780 mhz, nice dry ice run
10-03-2006, 04:48 PM
boostedevo

Quote:

man that's verynice.. how bout the highest clock in 1,7v vcore? anyone?

Here's mine, 1.70Vc actual on DI. http://valid.x86-secret.com/show_oc.php?id=126121

http://i10.photobucket.com/albums/a1.../dice/5050.png

NB gets painfully slow over 500FSB (board goes to 580), so SPi's suck unfortunately. If I could just keep my tight strap to 540-550FSB, I'd be running 10m 32Ms all day long :rolleyes: Any thoughts there Bachus?
10-03-2006, 06:13 PM
epox4life

I still don't know how you get those validations so high compared to your SPI 1M runs, maybe your cpu is just different.
10-03-2006, 06:20 PM
bachus_anonym

Quote:

Originally Posted by boostedevo

NB gets painfully slow over 500FSB (board goes to 580), so SPi's suck unfortunately. If I could just keep my tight strap to 540-550FSB, I'd be running 10m 32Ms all day long :rolleyes: Any thoughts there Bachus?

I don't know man, maybe there is something about ES. Thing is, that I personally haven't seen any significant difference in 1M between straight boot @ 554x8 1:1 and 499x9 1:1 with my retail E6600 - they both give me 11.350-11.400, although I'm leaning toward the fact, that If I could do 500x9 "clockgen'ed up" from 400x9, it would sure better that time, maybe 11:200. The Stilt did it with his P5BDx/E6600, but that was 1.92vmch and icewater-cooled NB.

EDIT: BTW, nice 5GHz there... Coincidentally, both E6600s with validations above 5GHz I've seen were ES, interesting, isn't it? :D
10-03-2006, 06:26 PM
jozzy

Quote:

Originally Posted by corvus_corax

Great clocks :clap: Awesome Vcore.
:toast:

With my L625 i hit 4.3Ghz 32M stable on phase (SS, around -17ºC) in a P5B without vdroop and vcore mod, in DI (+ good container) i think is possible to reach at least 4.4 GHz with the same vcore without mods, but it depends of the CPU, some folks have hit good clocks with SS, so with DI + Xtreme Vcore :D :slobber:

hm.. its hard to get 4,7ghz with DI (1,7v vcore) eh?
what about DS4 guys, i think it has 2,0v vcore from bios right? so you don't have to mod it...
10-03-2006, 06:49 PM
Vikodemous

1.9V I had to read that part twice to make sure I wasnt seeing stars...http://img150.imageshack.us/img150/6839/bonggggg2lk.gif

Makes me think of old star trek "Scooty I need more Power" "I'm givin er all shes got Cap tin"

Show 100 post(s) from this thread on one page