Titan 507 = daily, cased, 7ccm chiller

Hi

Sometimes ago, Martin_Ez, a member of polish forum "purepc" ask me about chiller. First He had an idea to buy Alphacool 150 chiller, but finally He decided that He want a custom chiller from me :D . He want to have 10-20*c liquid temp with AMD AM2 X2 4600+ oced and 7900GTX, so rather nothing really cold ;) , but nice case was important need for Him :) .

Specs :


compressor: Danfoss NL7CLX
heat exchanger: cooper pipe 35mm/ 22 cm long + around 3m, 8mm pipe as evap
XV: captube 0.8 mm, 210 cm
condensor: custom made 195 x 167 x 60 mm , alu-cu, 0.395 kW, cooled with Sunon 120/38 mm (230V powered)
refrigerant : R507
case: metal case 49 x 21 x 23 cm, black, glossy coat
others: elctronic controller Everycontrol (from -40*C to +99*C), Sunon 230V fan 120/38mm on the back of case, SLHX+SLA in one ;)


http://www.members.lycos.co.uk/piotres2/martinez/1.jpg

http://www.members.lycos.co.uk/piotres2/martinez/2.jpg

Hoses terminals are one part with case (after some work on putty) :D .

http://www.members.lycos.co.uk/piotres2/martinez/3.jpg

Premier layer.

http://www.members.lycos.co.uk/piotres2/martinez/4.jpg

Black acrylic coat :D

http://www.members.lycos.co.uk/piotres2/martinez/5.jpg

http://www.members.lycos.co.uk/piotres2/martinez/6.jpg

http://www.members.lycos.co.uk/piotres2/martinez/7.jpg

HX from inside :) .

http://www.members.lycos.co.uk/piotres2/martinez/8.jpg

http://www.members.lycos.co.uk/piotres2/martinez/9.jpg

http://www.members.lycos.co.uk/piotres2/martinez/10.jpg

http://www.members.lycos.co.uk/piotres2/martinez/11.jpg

http://www.members.lycos.co.uk/piotres2/martinez/12.jpg

I've put some R507 and I saw this ...controller's probe is laying (it's on the end of HX pipe), gah :(

http://www.members.lycos.co.uk/piotres2/martinez/13.jpg

http://www.members.lycos.co.uk/piotres2/martinez/14.jpg

I've add some more R507 to finetune the unit :) .

http://www.members.lycos.co.uk/piotres2/martinez/15.jpg

I must use some normal tape, because armaflex tape was too thick in that place :eek: .

http://www.members.lycos.co.uk/piotres2/martinez/16.jpg

I don't have any WC blocks, so I've used 0.5l pure 20*c water + 1.0l 100*C water, and that mix gave me 53*C liquid + I've put Maxi-Jet 1000 pump into loop :D

http://www.members.lycos.co.uk/piotres2/martinez/17.jpg

After 15 mins from turning on chiller, I got 5*C :) .

http://www.members.lycos.co.uk/piotres2/martinez/18.jpg

http://www.members.lycos.co.uk/piotres2/martinez/19.jpg

I've turned off chiller in that time, because I heard sound of crushed ice into HX :( (only pure water) .

http://www.members.lycos.co.uk/piotres2/martinez/20.jpg

http://www.members.lycos.co.uk/piotres2/martinez/21.jpg

http://www.members.lycos.co.uk/piotres2/martinez/22.jpg

Regards
Peter

Beautiful freaking setup.

Nice unit mate, schmicko paint job too :toast: . Can you get a decent flow rate through your HX?, it looks like the pipes have been squashed excessively when creating the coil, at least it'll help achieve a great heat trasfer to the water :D, not good for flow rate but :(

looks good!

but i would consider putting the pump inside the chiller case as make it much easier to bleed the system :)

Quote:

---

Originally Posted by aussie_guy00000

Nice unit mate, schmicko paint job too :toast: . Can you get a decent flow rate through your HX?, it looks like the pipes have been squashed excessively when creating the coil, at least it'll help achieve a great heat trasfer to the water :D, not good for flow rate but :(

---

I know, pipes are squashed a bit, but it's not a problem ...pulldown is quite fast, chiller work OK :) .

@Blaster: I know, but owner already has nice inline Laing pump mounted into PC case, and don't want to change it .

Regards
Peter

here's a question

will the water flow direction make a difference to the final water temp?

Hey Piotres

Change that: Danfoss NL7CLX (nowy)

"nowy" in polish mean new ;)

Quote:

---

Originally Posted by MaSell

Hey Piotres

Change that: Danfoss NL7CLX (nowy)

"nowy" in polish mean new ;)

---

Oh LOL, thx Masell :)

hey man,very nice design,i loved it =)
Can u tell me the thickness of the metal used on box?thank you

Quote:

---

Originally Posted by GuGaCoSa

hey man,very nice design,i loved it =)
Can u tell me the thickness of the metal used on box?thank you

---

It's 1.50 mm :)

Nice Case with Controler , Nice compressor - hx , compact overall build , So your customer will be very happy :)

Very nice build ;)

Man that is very nice i love that case great job.

Plus i want one of those