Merom T7600 ES@ +3600mhz ¿WR?

Aopen i975Xa-YDG" (no vmods)
Merom T7600 ES B1 "1.45vcore"
2x512 Corsair 5400UL 1.2v 4-3-2-1 2.13v
2x1024 Crucial Ballistix DDR800 4-3-2-1 2.13v
OCZ PS600w
Cooling: Watercooling CPU/Chipset. ~31ºC Water temp / ~33º ambient (for Validation/Spi ~6º Water temp.)

Validation 3.656.54 Mhz http://valid.x86-secret.com/show_oc?id=120555

http://img180.imageshack.us/img180/7...idationtl1.jpg

1m: 3.601mhz
http://img221.imageshack.us/img221/7013/1m3600re9.jpg

2m: 3.601mhz
http://img221.imageshack.us/img221/4357/36002mci2.jpg

3Dmark01: 3.403mhz
http://img206.imageshack.us/img206/5...050curtlw3.jpg

3Dmark03: 3.403mhz
http://img206.imageshack.us/img206/9...029curthl7.jpg

CineBench 95: 3.431mhz
http://img206.imageshack.us/img206/5...430curtsu6.jpg

My Watercooled
http://img480.imageshack.us/img480/2...0283ms0.th.jpg


Only 1 out of 5 kits of micron Fatbody works in my Aopen :(

What can be the reason? :confused:

2x512 OCZ 4200 D9DQW = Fail
2x512 Corsar 5400UL 1.2 D9DQW = Perfect
2x512 Corsar 5400UL 1.2 D9DQW = Fail
2x512 OEM Micron 3200 D9DQW = Fail
2x1gb Crucial FatBody = Fail

Tested with bios: 1.3C, 1,07, 1.08

Does anybody have the same problem? :confused:

Bye

Nice...
Can you tell me what prime stable is max fsb for Aopen ?

Beefy OC for water for sure, cg's on the wr. :)

Any chance you have the molex plugged into the board? I thought I had ram issues, but removing it let everything POST for some reason.

In process, in the present 253Fsb

http://img207.imageshack.us/img207/5063/003gi3.th.jpg

nice oc there.

which stepping of T7600 do you recommend? B1 or b2?