Hello
any one to lokk at it?
want vdimm 2.5+ and mch 1.7v.
regards
Tommy
Printable View
Hello
any one to lokk at it?
want vdimm 2.5+ and mch 1.7v.
regards
Tommy
I'm working on the vmch. I think I got it figured out, but I'll verify it first.
I'll see if I can find out vdimm too.
ja, det hadde vært fint! :)
Lookin forward to it! :) my D9 needs more volt than 2.3 and mch more than 1.45
Here you go!
I have tried them both myself. I take no responsibility if your board stops working, etc. Enjoy!
Just over the dimm slots
http://www.nordiccrew.com/crotale/ab.../ab9_vdimm.jpg
Just below the PCI-Express port
http://www.nordiccrew.com/crotale/abitlabs/ab9_vmch.jpg
Updated with vcore mod and vcore read out:
vcore:
http://www.nordiccrew.com/crotale/ab.../ab9_vcore.jpg
vcore read out: (backside of the board)
http://www.nordiccrew.com/crotale/ab...e_read_out.jpg
thanks
are u using the 13 bios? and vdimm? are those ddr2 micron D9 fat?
Haven't had much time with the board, so I haven't tried how good it clocks memories.
I've run both BIOS 13 and a 14Beta, but I didn't notice any difference in overclocking between them.
I use Beta Bios 'AB9-018" and This is some result I can get from this bios.No need to Vmod.:)
If I've more time for this board I'll post for more result.
http://www.unlimitpc.com/webboard_pi...1-2_resize.jpg
where I can take this beta bios? :toast:
would love to se that with higher multipl...
i have the 14 bios and cant change multipl (ES) and the board wont let me get moore than 401.5 even if i set it to 500.. stays at 401.5 x 9 that is.
does this ab9-18 bios fix this issue?
regards
hehe..
430 - superPI
http://kiner-web4.myweb.hinet.net/AB9_PRO/OC/01.gif
430 - CpuMark99
http://kiner-web4.myweb.hinet.net/AB9_PRO/OC/02.gif
400 - SuperPI
http://kiner-web4.myweb.hinet.net/AB9_PRO/OC/03.gif
400 - CpuMark99
http://kiner-web4.myweb.hinet.net/AB9_PRO/OC/04.gif
any new vmods yet ? like vcore ? and how about some that done the vmods them self :)
What more mods do you need?Quote:
Originally Posted by blind_ripper
What speeds have you reached so far?
vcore mod would come in handy .Quote:
Originally Posted by crotale
gone get me this bord tomorrow ,had 25kg off dice today and my P5B just died without a resone :(.
gone post in tomorrow morning ;) , have a X6800 that did 4.68ghz on p5b so hope il get some more by clocking in windows now :) .
thx cortale
I'll look into it next time I use the board.
I ll always waiting your result with AB9Pro !!!!!! show us MasterQuote:
Originally Posted by crotale
Maybe i try voltmodding AB9-PRO.
MCH is limiting me, only 450fsb stable.
http://img251.imageshack.us/img251/4...nageep9.th.jpg
this so far I try with ABIT AB9Pro no mod FSB 460 bios v15 all on air, when I set in FSB500 only post screen cannot boot in windows !! now I try with mod Vmch :) :) :)
http://valid.x86-secret.com/show_oc?id=135577
http://img.techpowerup.org/061105/460.jpg
any news on the vcore mod guys?
I think I got it sorted out, but I need to test it first.Quote:
Originally Posted by Johnny Bravo
Thanks Crotale, it'll be very useful for the dry ice session I have planned for it :p:Quote:
Originally Posted by crotale
little bit to late for me but np with 1.65vcore if got 4.56ghz stabel for 1mpi :) .Quote:
Originally Posted by Johnny Bravo
still have cascade back here so so i would be very nice to get the little extra :D
VMCH Mod is also possible just with a pencil??
VCORE MOD
Solder a 100Kohm variable resistor between these two points :
http://img472.imageshack.us/img472/5918/dsc00326yk8.jpg
From above -
http://img452.imageshack.us/img452/7476/dsc00329md9.jpg
Props to Hipro5 for explaining his mod for the AW9D-MAX vcore mod which lead to this :toast:
gone test next week all vmods , any vcore read out point ?
oyes how to let set abit guru fsb above 400 ?