My conroe E6600 - !!w00t!!

Printable View

Show 100 post(s) from this thread on one page

08-19-2006, 06:13 PM
sombrio

My conroe E6600 - !!w00t!!

hI! This is what i can get for 24/7 with my conroe. :D

config:

CPU - CONROE E6600
MOTHERBOARD - ASUS P5W DH DELUXE
BIOS - 1101
MEMS - TEAMGROUP 5300 (MICRON)

VCORE - V1.35 ON BIOS
VDIMM - V2.10

http://img342.imageshack.us/img342/1156/cora2ol4.jpg
08-19-2006, 06:15 PM
bugeyes

You claim that this is a 24/7 setting yet you only prime test for 30mins ? :stick:
08-19-2006, 06:17 PM
sombrio

Quote:

Originally Posted by bugeyes

You claim that this is a 24/7 setting yet you only prime test for 30mins ? :stick:

Its enough! :)
08-19-2006, 06:35 PM
garnin

You're better off running dual super-pi 32M than running small FFT's for 30 minutes, but neither really proves 24/7 stability.
08-19-2006, 06:55 PM
John600rr

Thats pretty good, even for just 30 minutes. My 6600 would need 1.45+ VCore to run 30 seconds at his speed.
08-19-2006, 07:11 PM
grimREEFER

up the vcore and let it run for 8 hours
08-19-2006, 07:16 PM
miochza

Even 30 min, that is much better than my chip can do. My core would have to be 1.5v (at least) for 370 fsb.
08-19-2006, 08:42 PM
Brahmzy

Quote:

Originally Posted by John600rr

Thats pretty good, even for just 30 minutes. My 6600 would need 1.45+ VCore to run 30 seconds at his speed.

Quote:

Originally Posted by miochza

Even 30 min, that is much better than my chip can do. My core would have to be 1.5v (at least) for 370 fsb.

Same here! :(
08-19-2006, 08:50 PM
andyisc00l

Quote:

Originally Posted by sombrio

Its enough! :)

you should really bump the voltage up to 1.5v curious to see prime stable looks like a good chip
08-20-2006, 12:37 AM
Der_KHAN

wow, i thought the 6600's would average much higher
08-20-2006, 12:39 AM
Drow

Air or water cooling?
08-20-2006, 01:53 AM
sombrio

Air cooling - Thermalright xp-90c + noiseblocker xe2.
08-20-2006, 02:54 AM
Durzel

30 mins Prime doesn't mean anything, sorry.
08-20-2006, 03:03 AM
TL1000S

Quote:

Originally Posted by Durzel

30 mins Prime doesn't mean anything, sorry.

I disagree...
30min dual Prime means that the setup potentially is "24/7-stable", but may need better ventilation (aircooled in case).. or a slight bump of VCore to be verified 24/7-stable (at a given clock).
08-20-2006, 03:36 AM
sombrio

My temps at 25 minutes of prime are:

Processor - 49º
Core 1 - 65º
Core 2 - 65º

2xSP20004 (30 minutes) + 2xSPI (32M) at the same time.

ONLY V1.35 VCORE IN BIOS :woot: :woot: :woot:

http://img83.imageshack.us/img83/3293/corebk4.jpg
08-20-2006, 03:40 AM
anarinsk

It has a real potential! Nice CPU :clap: :clap:
08-20-2006, 03:41 AM
berk

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing. :)
08-20-2006, 03:43 AM
sombrio

Quote:

Originally Posted by thebeast

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing. :)

I dont want and i dont need to give more than v1.35 vcore. My cpu overclocks very well with low voltage :D

VALIDATION:
http://valid.x86-secret.com/show_oc?id=113421
08-20-2006, 04:00 AM
Mykou

Can you tell which revision is your asus P5W dh please ?

Nice results indeed !and nice ram ;)

I bet you could be dual prime stable 24/7 with at reasonable Vcore (1.40/1.42 )

I'm fine with that bios too , and dual prime stable with actual lower Vcore ( 1.48 vs 1.51v 4 days before )
08-20-2006, 04:45 AM
kimandsally

Quote:

Originally Posted by thebeast

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing. :)

Why give it volts if it doesn't need it? And with air cooling 1.55v is a bit high would it give you a thrill if he knackered it up following your stupid suggestion?
08-20-2006, 04:45 AM
matt1

What week is your Conroe?
08-20-2006, 04:53 AM
sombrio

Quote:

Originally Posted by matt1

What week is your Conroe?

Where i can see the week of the cpu?
08-20-2006, 04:56 AM
vintage_guitar

Quote:

Originally Posted by sombrio

Where i can see the week of the cpu?

read the actual serial number on the processor that starts with L6 for example.. a week 23 is L623 and a week 24 would be L624 and 25 would be L625 for the first 4 characters.
08-20-2006, 05:14 AM
berk

Quote:

Originally Posted by kimandsally

Why give it volts if it doesn't need it? And with air cooling 1.55v is a bit high would it give you a thrill if he knackered it up following your stupid suggestion?

WTF Mr.Serious????:mad:

I was encouraging him to clock a bit more,not hurting/bashing/intimidating him in any way.Some have had great results with good air cooling and high-ish volts,albeit the temps have to be watched..is that ok with you???
Go away,just go away.:stick:

Good results so far,if your satisfied,fair enough.:)
sheesh.:rolleyes:
08-20-2006, 05:18 AM
sombrio

Quote:

Originally Posted by vintage_guitar

read the actual serial number on the processor that starts with L6 for example.. a week 23 is L623 and a week 24 would be L624 and 25 would be L625 for the first 4 characters.

Look at this. I guess you can see it in the box.

http://img201.imageshack.us/img201/5004/dsc00029ie2.jpg

Show 100 post(s) from this thread on one page