Printable View
I have seen no higher X1900 AIW here, but I know someone with conroe will end up higher than me :(
CPU and GFX are air cooled, stock small heatsink @ AIW.
Pic:
http://www.sspmustang.com/40k-3d01-AIW.JPG
Compare:
http://service.futuremark.com/compare?2k1=9019773
Heatsink:
http://www.techpowerup.com/gpudb/images/158.jpg
Nice job man :) Knew you'd get it!
Looking @ the stickies, this is a WR untill someone runs one with conroe...
Going to install a stock XT heatsink soon ;)
Can you do a 05 or 06 run? Nice scores :toast:
I will get 03/05/06 done once the new cooler goes on, I dont have Pro liscenses, so I cant keep temps down on those :(
This stock cooler is HORRIBLE!
nice score..
im getting the same VC, hope to get the same results. ;)
keep us updated!
what voltages are you running it at?
very nice card.
1.3v core and 2.119 on ram, but I am hitting a very bad temperature wall...
The stock cooler on this thing is horrible....
Hopefully I can do a good 700+/650+ run with the new cooler...
i always wondered how this card would oc since it has a reduced number of voltage regulators compared to the XT/XTX. i dunno if it'll be capable of 1.425v on the core like the rest of the X1900 family, but i'll let you decide on that ;)
hopefully the new cooler will net you some more mhz, if not you can always go aftermarket/water.
Good luck!
Quote:
Originally Posted by aiya
I thought it actually had the same number? Either way, 1.5v is available in ATI tool, and thats what I plan on using...
Running anything over 1.3v in ATITOOL eventually will lock up, even if the clocks are stable at lower voltages, and heat isnt an issue.
Newer results will be posted tonight :)
Impressive, Wish ida got the one I ordered for 149 a few months back, it was a typo but some ppl actually got theirs :(
I wasnt one of them..
3d01:42586
Http://www.sspmustang.com/OT/3d01%20full%20tweak.JPG
http://service.futuremark.com/compare?2k1=9022185
Trying to get 3d03 to pass, but it is a tough bench.
3d03: 18429
No pic of 3095 + ram tweak, here is 3030 + untweaked ram
http://service.futuremark.com/compare?2k3=4902620
Ordered one @ $194. COuldn't resist :p: Will be doing water XD
For refrence, my GT1 in 3D03 is exactly the same as AFI's Opteron 170 @ 3.2ghz.
That is about the same ammount of CPU power I have, for comparison reasons...
Now you will be able to hit 40k 3d01 and record TV @ less than 200$ :)Quote:
Ordered one @ $194.
Hell yes :D Now all I need is a better cpu... hard to buy new stuff with gf >.<
nice they jsut had this for 149 but now OOS. how high does the ram go?
what volts are u using to reach 702/666(im taking it this speed is just for benching)? can you do 05 results please?
i had the x1800 aiwand it was great and i dont mind picking this up.
Volts:
1.3/2.119/2.119
I have not even tried other volts on ram, but the ram will start to artifact at 684 mhz.
Using more voltage on core than 1.3v made it unstable, and only marginally helped.
I could run 3d01 for hours, and ive made it through 03, but I dont know exactly how stable it is 24-7 gaming...
running 05 soon :)
can you crossfire these with xpress 3200?
Well, I have a DFI RD580 and a Mastercard.. I could try, but.. I think there was a problem that someone else listedQuote:
Originally Posted by menlatin
Wow nice scores for the card. I'm wondering though, is it worth it over a X1900GT? I know this has the full 48 pixel shaders and 16 pixel pipes but overclocking wise, it seems like the X1900GT can hit higher core and especially memory speeds. I at first wrote off the AIW because it seemed like the relatively slow RAM was holding back performance. What rating is the RAM by the way? 2ns or 1.4ns?
I'm sort of debating the two.
1.6ns ram.
I am trying some higher vmem on card, trying to get 693 on mems stable.
3D05:
http://www.sspmustang.com/OT/3d05%20tweaked%20tew.JPG
http://service.futuremark.com/compare?3dm05=2152461
3D03:
http://www.sspmustang.com/OT/3d03%20tweaked%20tew.JPG
http://service.futuremark.com/compare?2k3=4907163
More is left, voltage is at 1.3/2.160/2.124
Core and mems start to artifact at 704-706 mhz. I put a 80mm fan blowing on the PWMs on the card, as they were getting 95c+
I might be able to run more core voltage now...
Looking good. I might have to pick one of these up, the TV tuner is hard to resist. Now I just need to get rid of th x800xl.