Printable View
:) by Pt1T
Air cooling ( tuniq tower 120)
G skill 6400 HZ
Vcore 1.5v vdimm 2.2 (bios )
vfsb Vnb/sb all auto !
http://img55.imageshack.us/img55/3623/snap11wt0.jpg
Nice results :clap:
Have anyone tried this board yet too?
edit: some screens here
http://www.overclocking-masters.com/...ic.php?id=3427
waow ! Vcore up to 1.8v so NB/Sb too
Nice results. How are temps?
Sorry , just pick all results from overclocking masters forum .
No temps shown ATM
edit: I saw 40° cpu at bottom of the screen , pretty well cooled ...:eek:
What type of cooling on the NB?
I reckon that will be a good board if Biostar continues with what they have done with Tforce in the past. (Back when I was looking for an AMD Rig there 754,939,AM2 stuff was all doing well for budget offerings. How they do with intel I have no idea.)
maybe there's hope for the 965 boards after all and higher multi chips :p:
how damm this biostar is very good overclock
I would choose this hands down agains the Gigabyte board. The latter has - as their tradition is - FUBAR BIOSes, just look at the show starting on the other threads : cannot go over 400, memtest errors, help me, &^%& Gigabyte etc
No cooling on NB, just a 120mm fan on the ram.
40° is the cpu temp under Tuniq tower 120 + 120mm papst.
http://users.skynet.be/pt1t/6600es/1M_450X9.PNG
Damn Pt1t , this temp is amazing at 4 ghz+ air cooling !
:toast: :toast: :clap:
Are these clocks done from bios ?
Yes :banana:Quote:
Originally Posted by Devious
Now if u can do the same with retail cpu then i am definately getting this board
btw what are NB temps?
Biostar tforce 965P vdimm mod is the same than an Epox 9nda3+
So just use a pot from pin 6 to a ground like that
http://www.fragtek.com/pix/myvmod.jpg
The Gigabyte 965 boards (especially right now DS3) will get more and more mature by newer bios versions. So they aren’t that bad as you think.Quote:
Originally Posted by caligula
biostar board normally clock really well. i own a tforce4 ultra board and its running strong :D
nd now i can change vcore / fsb under windows :
quick test
http://valid.x86-secret.com/show_oc.php?id=109722
Tforce is nice but vdimm only 2.2 :/
Quote:
Originally Posted by kiwi
gonna vmod it :stick: because those D9 need it :)
I ll have ds4 tonite or monday to compare both board.
I am sure they have no probz giving higher vdimm in bios since this is Tforce series. Maybe next bios or beta bios
Allready asked to biostar :D
Quote:
As per Memory Voltage It's unable to increase It By BIOS update. It's
hardware limitation. We had designed the Memeory Voltage at 2.3V as maximum
Voltage. This Is because high Memory Voltage will burnt the memory or
reduce the life cycle of memory.
the only one i know 's gary from anandtech :rolleyes:Quote:
Originally Posted by Mykou
Haha, did biostar answer this?
Sure it will reduce but 1.8V for cpu and 1.8V for NB will reduce the life cycle of cpu/nb as well lol :slap:
yep sure 1.8v on c2d in air , that will reduce his lifetime :slapass:Quote:
Originally Posted by kiwi
Yep it was biostar answer , when he gave me new Bios.
He also said 2.3v, but it s 2.2v bios , 2.11v by sensor.