Printable View
tried the Gskill F2-8500PHU2-2GBHZ on my asus P5wd dh deluxe today and i must say , the memory got a lot of potential.
only the asus won't let me run 500+ 1:1......no idea why :(
Tech Spec
Brand G.SKILL
Model F2-8500PHU2-2GBHZ
Type 240-Pin DDR2 SDRAM
Capacity 2GB (2 x 1GB)
Speed DDR2 1066 (PC2 8500)
Cas Latency 4
Timing 4-4-4-5
Voltage 2.4V
Very nice memory , do some 3-3-3 testing later on.
http://82.173.172.10/Rol-Co/gskillkl.jpg
http://82.173.172.10/Rol-Co/sisoftbbkl.jpg
Wow, very nice mate :toast:
Nice, Rol-co. You should also run unbuffered test. I'm sure you will get over 6000.
this was just a quick test, more to come sierra, first i had to find out what the asus would do with this.
strange thing however is that it won't let me run above 485 1:1 just like the 8000ul, problaby a board issue.
will do unbuffered too, and some 3-3-3 testing.
485 is already a very good result with this board...Quote:
Originally Posted by Rol-Co
Quote:
Originally Posted by 0DIGy
good result indeed, but did 530 fsb already with this board :D
only 1:1 it won't let me
please help me, i have the same mobo and cpu, corsair and Gskill memories but i cant to reach anything above 1000Mhz of RAM ...
http://www.xtremesystems.org/forums/...d.php?t=108452
Can you post BIOS settings ... thanks ...
and some c3 testing with the g.skill
nice set of memory
http://82.173.172.10/Rol-Co/c3-4-5kl.jpg
http://82.173.172.10/Rol-Co/c3-3-4kl.jpg
Very nice job Rol-co! These G.Skills rocks! :clap:
i sent you a pm..
How do you get the dividers to work?
i cant get it to boot other than 1:1 i got no idea what i am doing wrong... do certain things need to be disabled to make this work?
thanks
What voltage is that? Don't tell me please, it's still 2.4v? :DQuote:
Originally Posted by Rol-Co
How come nobody does 32MB ? 1MB doesnt even hit at benchmark stability, much less 24/7 :shrug:
I have the same question .... again ...Quote:
Originally Posted by Pandamonia
that's a nice 2 GB kit - hopefully running 1:1 won't be a problem for the future.
finally DDR2 looks good even to me :)
Actually quite a few people here run 32M. You just need to look. Benchmark stability depends on the benchmark. If you're trying to break a speed record at the Bonneville Salt Flats, you don't really care about 24/7 stability. Same is true for drivers at the Indianapolis 500.Quote:
Originally Posted by wa77ss
Extreme benchmarking is just a hobby for most people, many of whom have more than one computer. Never assume that people are going to use just one machine for everything under the sun.
This forum has always been about pushing a system to the absolute limits, hence the name "XtremeSystems". It's only in the past year or so that newer members have tried to shift the focus.
especialy for you.....3d c3 1:1 testing :)Quote:
Originally Posted by wa77ss
http://82.173.172.10/Rol-Co/aquam3ockl.jpg
Guy's
Sorry i cant explain why its working here but not with your's, i modded the board
Its running with a thermaltake big typhoon chipset cooler and 1,95 vmch just for sure
Awsome Aquamark score :eek:
Run some 3Dmark01se :fact:
Edit i think you are in 1st palce here http://www.xtremesystems.org/forums/...ad.php?t=92232
Please can you test something for us? Please set Vmch = 1.60V FSB at default 266 and try memory divider 1066, please ...Quote:
Originally Posted by Rol-Co
ok i will test it for you tonight.......
Big Typhoon for Chipset? :D
If it is true (and not the little extreme spirit that is a bit like it) i demand pictures NOW :D
Here.Quote:
Originally Posted by OBR
http://img435.imageshack.us/img435/6...bfr2ql0.th.png
And please read this. I'd tried to explain to you in the other thread. I encourage everyone to take a read on this article if you're wondering why you can't keep your memory async after 370FSB, and why you can't keep 1:1 after 420FSB, etc. Unless heavily modded, 1:1 600MHz on this board with current BIOS is IMPOSSIBLE.
http://www.bleedinedge.com/forum/showthread.php?t=22297
Excellent clocking, Rol-co. :clap: I wish I had some soldering skill.
you asking we deliver :DQuote:
Originally Posted by SlackeR
http://www.xtremesystems.org/forums/...d.php?t=107552
@lopri
yep youre right about the strap thingie :) but somehowe a few board's in combinaton with a sertain brand memory can get higher than the 370-420.
maximum unmodded was 454-456 , sierra bound here reach't 464 unmodded, loosing timings wil help too.
maximum modded
http://valid.x86-secret.com/show_oc.php?id=109522
As Rol-Co will tell you, each P5W DH is different. Some will do well beyond 420FSB unmodded, while others won't. Highest I've gotten my unmodded board is 460FSB @ 1:1. I've gone higher than that using another ratio. So the part about the boards not going beyond 420 1:1 is inaccurate. The article does not take into account the fact that the boards vary in overclockability. Same reason why all CPU's don't overclock the same, even though they went through the same manufacturing process.Quote:
Originally Posted by lopri
Asus boards have always been like that. If I could, I would set up three P5W DH boards, and I'll bet you each one will overclock differently.
You are not right, my problem is not in high FSB but at default ...! I cant use 1067MHz of memory at default ... this Tonys article is not aplicable to Asus board, this board does not have a 1333 strap ...Quote:
Originally Posted by lopri
The P5W DH does not have any NB strap settings. But there has to be a strap there, otherwise the NB would not function properly. The only way to tell which strap Asus is using is with an oscilloscope, or by asking one of their technicians.