I read DS3 has problem detecting right timmings with DDRII 800MHZ CL4, the board will auto boot with CL3, which result to unbooted board, does DS4/ DQ6 suffer from same problem ?
Printable View
I read DS3 has problem detecting right timmings with DDRII 800MHZ CL4, the board will auto boot with CL3, which result to unbooted board, does DS4/ DQ6 suffer from same problem ?
where did you heard of such a problem ?
Yes,ds4 has the same problemQuote:
Originally Posted by egyteam
what can you do to this ?
i was going to use ocz platinum (4-5-4-15) together with the ds3.
no way to get in bios ?
i dig this thread out, cause this is really important.
thx !
im plannin same ram and moboQuote:
Originally Posted by realsmasher
but havent really heard much bout that problem
i don't really want to buy an extra stick of crap ram, just to get in bios :eek:
somebody with ds3 and cl4 ram, please test this.
Thats what happens with my g.skill zx,have to enter the bios useing an odd stick of dd2 533,save as cas 4.The ds3 bios trys to boot at 800mhz cas 3 otherwise and that ant going to happen.
you tried with only one stick of the g.skill ?
if it's really not possible without an other stick, i can't buy this board...
Well I have DS-3 and OCZ Pc2-6400 4-5-4-15 platinums and no problems, but then again I am using a celeron with a 533 bus.
I haven't even tried OCing this CPU or even updating to F3 bios (lol..I know) but maybe I better manually change to cas 4 and maybe up to volts to 2.2 before I install my Core 2 duo?
Anyone have any opinions?
the board would ran on 533mhz ram at first too(not overclocked conroe =266fsb)
but i'm not sure if it works or not.
the ram would have to work under 533/cl3, where 800/cl4 is normal.
really hard to say :(
somebody have a fix to this problem ?
the problem isn't applicable to conroe/allendale runners...............as the PC starts up with 266MHz FSB
i have HZ sticks and that's what happens...................................no problems with them whatsoever:toast:
you have what ?Quote:
Originally Posted by dinos22
cl4 on gigabyte ds3 first bootup and it ran without problem to bios ?