I can't find any review for this ram, what is the maximum stable frequency and what is the maximum safe voltage? Also what ICs are on these sticks ?
Printable View
I can't find any review for this ram, what is the maximum stable frequency and what is the maximum safe voltage? Also what ICs are on these sticks ?
I'm interested as well.
I can't wait too long for Tankguys to get the 3-3-3-8 667mhz stuff in. It's either this stuff or the G-Skill from newegg.
The 3-3-3-8 stuff should be here Friday :)
Do tank ship internationally?...like say where i live, Ireland?
http://www.memory-configurator.com/p...kit/index.htmlQuote:
Originally Posted by Richard Dower
Irish based company where I got mine from! :D
Yes, but you'd likely be better off buying from the site that was linked in the post below yours :)Quote:
Originally Posted by Richard Dower
Hello Guys!
Is this memo full compatible with asus p5wdh mobo?
What kind of chips on this memo?
I gonna use with E6600 which able to run on 3.6 (9*400) what do you think how much will the maximum mhz on what timing?
THX
No answer here :(((
But I found out bymyself and it's compatible :)))) http://www.kepfeltoltes.hu/060905/Xt...toltes.hu_.jpg
I have also been looking for info on these, pretty hard to find
Yup, cant find info on IC's anywhere.
Have a set arriving tomorrow
Quote:
Originally Posted by Corbu'
- They have Micron D9GMH chips;
- it worked OK with Asus P5WDH for me, but i've seen reports of some problems caused by Asus' BIOS .. like here;
- Max safe voltage is 2.2V by the specs, but 2.4V or so with a little airflow is OK for 24/7.
- Corbu', you can also ask these questions in the crazypc.ro tech support section ;).
Ati007 - maximum rated voltage is 2.3vdimm.
should be good for well over ddr1000 at 5-5-5 timings.
i think it has micron d9gmh ic's so if you really want to push it its up there with some of the best.
mine run at 5-5-5 ddr1066 2.29vdimm 24/7
here's what my 3-3-3-8 667mhz 2 gig kit does quite easily, at 2.19v on the DFI Infinity, on a better board it should scale up considerably higher..
http://img83.imageshack.us/my.php?im...xscreenon7.jpg
http://img246.imageshack.us/my.php?i...ndwidthvn7.jpg
regards
Raja
Here are some results from my Team TXDD2048M800HC4DC kit. And yes they are D9GMH I removed the heatspreaders last night to take a peek at the IC's
I'm pretty stoked with the results so far. This is my first DFI board, so I'm sure there's more to be had from these once I get my head wrapped around this bios, especially with some active cooling. They'll do 1100+ 2.19v
nice i just bought 4 sets of this stuff myself to play with and see as well :D
Frosty - 581Mhz with only 2.34Vdimm??????????
Thats a sweet OC. My Quad GT is terrible for memory overclocking :(
on those modules, except i have 2 X 512Mb kit:
http://www.xtremesystems.org/forums/...postcount=3910
:up:
I'm rigging up a 75mm Server CPU fan capable of 6000RPM to bolt directly on the RAM :D, then I'm going to see what they can do with some real voltage. 6/32 bolts right through the fan and into the heatspreaders (used a nut as a spacer of sorts to keep the fan about 1/4 from the sticks) works perfect and this fan pushes so much air both my NB and CPU idle temps went down 2-3C.
I also need to learn a little more about the sub timings and this new DFI board.
Eh, do you intend on using a CPU at all??? lol
Doesnt look like there's any space for a CPU cooler!
:ROTF: Yea, I'm watercooled and the fan actually goes on after my D-Tek Fuzion, it sits a cm above the waterblock ;)Quote:
Originally Posted by Dublin_Gunner
I've already had it installed to see if it would work, just had to rewire it as it was on a 5 pin connector.
ah bummer, received my memory today only to have been sent the wrong model.. they sent 4 sets of the team dark series instead :(Quote:
Originally Posted by eva2000
Hopefully, local Aussie retailer will send me the correct models heh
They will also run at low voltage; mine do 860Mhz 4,4,4,10 at
only 2.0 volts. Live long and prosper..they run really cool at 2VoltZ. This ram is the best!
These just continue to impress me to no end!
1126 5-5-4-9 2.18v 8m pi stable testing 32m now.
WHOA thats a hella overclock for 800mhz ram.
536mhz@4-4-3-3-1 with 2,45v in BIOS
But i can`t get 1200mhz with 4-4-4-x not even with 2,6v. Only 1200mhz with 2,6v and raport 333/1066:mad: .
I don`t know if the ram is bad or mobo.
http://img91.imageshack.us/img91/8838/44331tubolw7.png