Printable View
Here are my results so far. Keep in mind that this is meant to be a 24/7 rig along the line of mdzcpa's build.
The system configuration:
Retail X6800
P5W-DH Deluxe BIOS version 0701
X1900XT and X1900XTX in Crossfire mode and watercooled in seperate loop
2 Raptor 150 hard drives in raid 0
X-Fi Platinum sound
PC Power and Cooling 1000 watt psu
OCZ PC2 8000 memory
The waterblock on the cpu is the Swiftech Storm.
http://img85.imageshack.us/img85/5012/280fsbby9.th.jpg
More to come....
he is running dual prime.Quote:
Originally Posted by thunderstruck!
Vcore in the bios is set to 1.475.
What voltage is the chipset at?
Is x13 the default multiplier for that cpu?
can't see your pic
wow a whole 8 minutes................good luck
ouch 49c with a storm... Tried any max clocks with stock volts? Maybe try 9x and 10x multi. Kind of give us an idea about the retail 66 & 67
Chipset voltage is at 1.55.Quote:
Originally Posted by Plaicd
Default multiplier for this cpu is 11.
should you be lowering the multi (since it unlock) and raising de fsb like 400*9 or something like that?
you should go for a max and tell us :D
I will try lowering the multiplier for max FSB.Quote:
Originally Posted by Pied
Ouchies hot :( Do you think you can try single 1m max clock?
That's a respectable overclock!
I pumped through an extra 700MHz from my intel as well :D
^
so did i. :D
lookls pretty good
what kinda wc is it, i know your using the storm but what about other patrs
mmm...49°...someone that has a b1 chip could please tell if b1 are as hot as b2 or there are some differences?thanks
Fabio:)
ps happy to receive a b1 step..i don't like this new revision:D
i prefer to see 5ghz on my chip:slapass: :D
I'm using an MCP655 waterpump, Thermochill PA120 radiator mounted externally with a radbox, and a second Swiftech single 120mm fan radiator mounted inside my case.Quote:
Originally Posted by Gun_Strife
i say temps are normal here's my E6600 on Badaxe at 3600mhz at 1.371v Swiftech G4 Storm with Thermochill 120.3 and MCP650
Room temp = 23-25C
Interesting the temps are a bit off for me by 4C between Intel DCC vs Coretemp
http://fileshosts.com/intel/Intel975...etemp_idle.jpg
Intel DCC shows actual bios option values you set for vcore, vdimm, mch, fsb etc not the actual readings. For example 1.4v vcore in Intel DCC = 1.371v vcore reading in bios.
Load temps dual stressprime
http://fileshosts.com/intel/Intel975...me_load_tn.jpg
Damn these retail chips are hotter than a $2 pistol.
New! Rev 6 step B2, now with added Prescott!
my B1 is hot as hell too
Thanks for the confirmation of these temperatures eva2000. I was beginning to worry based upon the reaction to these temps from some of the guys around here. I will try to reach 4 ghz with a multiplier of 15 today just to see what kind of temps this produces. I'm not having any luck raising the FSB to near 400 while lowering the multi to 9 0r 10:(Quote:
Originally Posted by eva2000
Here's a pic of my setup:
http://img453.imageshack.us/img453/7...0010hi4.th.jpg
Anyone got any phase results on the retails? note to self: Must order a 775 clamshell kit.Quote:
Originally Posted by Supertim0r
Looks like plan A to stick a 6700 under Vapo LS is looking essential.
should have a retail 6800 (egg) under a Storm G5 tonight...
id assume ill have it under the Chilly1 SS within the week
and hope to do a D-Ice run not too far behind that
wonder how the IHS's are on these...dont really want to lap the stepping off but will if i have to
after enjoying Yonah temps for a while there its sad to see these "Press-HOT-esk" temps return :(
:eek:Quote:
Originally Posted by eva2000
How are people getting such high OCs on air when this thing is blazing hot on a water setup like yours?
high OCs on air = the better Rev 5 step B1 ES chipsQuote:
Originally Posted by BWR
hot = X6800 retail (Rev 6 step B2) so far.
It was only a fix for RAID5 afaik, but it seems to have hamstrung these chips quite a bit.
More data still desired.