Printable View
Hi there, my lovely E6600ES arrived yesterday and I was messing around a bit with it. I'm using a Scythe Ninja to cool the cpu. At standard voltage it's already at 50° in BIOS and goes up to 60° when primed. Roomtemp is ~25-26°. Can anyone else tell me his temps? (in case you don't know which tool: everest home -> computer -> sensors)
is this on the badaxe? ppl have been reporting high sensor temps on that board,
I would recommend not using more than 1.6v with air cooling. 1.5-1.55v is probably better. The BIOS temp readings on some of these boards are nowhere close to being accurate. On the Bad Axe, the BIOS temp may say 60C, when it's actually closer to 30C when measured with a probe.
50C with stock voltage sounds way too high. You should be idling in the 30's.
Yep indeed. Bad Axe 304 newest bios. Got a link on that?
Well that's what scares me, but if you're confirming that the bad axe is reading too high, I'm fine.Quote:
Originally Posted by sierra_bound
I had an application that i picked up from the Yonah thread that read the core temp direct from the CPU, this was much more accurate than the motherboard. It does not seem to work with the Asus p5W DH and an 805... might work with Conroe. http://www.thecoolest.zerobrains.com...opic.php?t=137
Give it a try. and see if it works...may give a better indication of temp!
i'm on water with e6600 on badaxe, bios idles at stock vcore 31C and at 1.418v vcore idles at 34C... load temps are 34-38C in windows according to everest heh
Just read the details and says it does conroe temps off the die :) http://www.thecoolest.zerobrains.com...opic.php?t=137
Hm thanks for that eva2000, I feel much better now :P
@simonmaltby
core temp has the same value as the bios
WHY is this pos cpu so hot?
Come on guys, I'm not willing to buy a new cooler for nothing. Gimme more temps! ;)
Have you tried using the Intel Utilities Program? It's on the motherboard CD. It's a little accurate than the BIOS as far as reading temps.
Are you 100% sure that you have good HS contact. Might be worth taking off, cleaning and reseating?
how you ascertain that ?Quote:
Originally Posted by sierra_bound
A friend has the Bad Axe. He used a thermal probe to determine the truth. BIOS read 60C. Utilities program read 45C. Probe read 30-35C.
I also had a Bad Axe. Temps in BIOS were always very high. I just ignored them.
I already took off the cooler and lapped the IHS, but it was already flat. I tried the programm Core Temp, but it also gave me results as high as 60°C. I found a thread here where many people got problems with the BIOS readings. But what about "Core Temp", did it also gave such results for you? I don't feel comfortable about ignoring these temps since I don't know exactly they're misread.
interesting i'm play on water with e6600 @3810mhz at 1.453v vcore fixed via ITK modded bios and bios says 46C idle heheQuote:
Originally Posted by sierra_bound
sai i'll let ya know a bit later just doing a prelim memtest before i let it boot into windows since i'm testing a new pair of ram too heh
If you have a probe, you should test and see what results you get. My friend was getting high readings in the BIOS and decided to check for himself.
That's the problem, I don't have one.
my 6600 on badaxe 304 - 1403 bios read 55C~ in the bios idle in win 50C~
stock cooler
stock vcore
the hsf feels hot...
btw:
i got "internal temp" 10C lower the "cpu" ...
What heatsink? And is it on stock clocks/volts?Quote:
Originally Posted by The Byter
hmmm bad axe has 3 temps in bios mine at 3810mhz at 1.441v read
cpu 45C
internal 31C
remote 30C
maybe internal or remote is the internal cpu temp ?
intel stock HSF 0.28AQuote:
Originally Posted by taemun
all stock
Ain't that Northbridge and Southbridge temps? BTW do I need to disable speedstep in windows or will it work when I just switch it off in BIOS. I'm asking because FCG made this Speedstep disabling tutorial? :confused:Quote:
Originally Posted by eva2000
E6600 QPGE Step 5/B1 / Intel D975XBX Badaxe rev304 temperatures
Well here's some temperature readings but not sure which is right. Most badaxes owners say bios temps are +10C higher than reality.
@9x266fsb = 2400mhz stock vcore 1.242v
Room temp = 24.8C right now
Bios cpu temp = 30-31C
Windows Idle = 27C/25C for core#1/core#2 most of the time but fluctuates by +3C for both cores at times.
http://fileshosts.com/intel/Intel975...le_25C_27C.png
Windows Load (dual stressprime) = 37C/37C for core#1/core#2
click image for larger pic
http://fileshosts.com/intel/Intel975...37C_37C_tn.png
Will do oc'd temps later :)
Any more input guys?
Hm so what to do now? Just ignore that and keep below 1.5v? i'm sure it'll go up to 70° with 1.5v and decent oc, well shouldn't be harmful anyway considering the tcasemax of 85° ?