-
2 Attachment(s)
How W/Cing helped me
when i was using the stock AMD cooler on my opty i was able to do 2.4Ghz @ 1.15v with load temp reaching 45C
tried 2.8Ghz @ 1.35vcore, the system crashed after running Prime95 for less than 20seconds casue the cpu's temp reached 60C
now after receiving my w/c setup from Petra's i was able to do the impossible :D
i know prime only ran for few seconds but still i was able to achieve 3Ghz @ only 38C with amb temps 24~25C
Thank you everyone helped me in choosing my w/cing setup and thanks to the guides and stickies
-
*envy's u*
i need 1.6v to get to 2.8 :(
-
this is one of the CCB1E 0609 :D, got from newegg by luck
Vcore in bios is 1.4v by the way
-
-
Am I right to think that this will give you better R@H production for Team Germany?
-
ya better R@H but not for team Germany, since i do it for XS's main team
just give me couple of days to find my sweet spot
i wasn't able to boot @ 3.1 or 3.2 since those G.Skills won't run with a divider less than 150:200 and they are already maxed out @ 3GHz, so i will be trying to sell those kits and buy myself a 2GB kit capable of ~270mhz ( which must be something garunteed ;) )
-
i need the same. 280 would be nice though!
-
Congrats on getting to 3ghz:toast:
hmmm maybe I can get stable at 3.G with my 148, cause I could boot @ 3 but would freeze soon after, then I could sell my 148 for a little more :-P
THen try my 170 :woot: :woot:
-
ya we sure need mem capable of ATLEAST 270mhz with those opty 165 ( should have got the 170 )
since i wasn't able to boot with 3.1 gonna try to find the maximum of my mem and hope i will be able to reach 3.1 with my mem @ 260 3-3-2-
-
mine are stable at 270 woot
i even think they are at 275 iirc
-
u r very lucky for sure
i got the ZX which can't hit as high as the HZ
-
this is a temp postition till i find a way to get some more tubes from the US :(
http://img361.imageshack.us/img361/9...cooling3uu.jpg
-
More tubing ?
I think you already have enough :)
-
not enough to reach the rad when hanged @ the back of the case
all i need was more few cm on the tube from the pump outlet to the rad and cause of that i will have to pay around 32$ for shipping few feets from US to Egypt
-
ouch, doesnt mcmaster ship to egypt?
-
didn't try them, i bought my stuff from Petra which can't pay using an Egyptian CC
so i will need to ask a friend living in the US to order few feet of tubing then shipped to her home then shipped to Egypt ( shipping to Egypt will cost around 31.6$ )
-
-
3.1GHzzzzzzzzz :)
was able to achive 3.1Ghz but my ram gave lots of errors when running PRime large :(
http://img212.imageshack.us/img212/4673/31ghz5zx.th.jpg
-
-
congrats on 3.1...
go go go...
-
Why do your pics look so dusty? o.o
Neway, nice work with the OC. I gottan push mine a little also, but... effort -.-"
-
cause i am taking the picture with a PC-Cam300 , whihc i think the first generation of digital cameras with resolution i am sure less than 0.3MegaPixel :)
-
FS020, now there's a classic. Was it already painted, or is that your handiwork?
-
My handiwork :D:D:D:D:D:D:D
i boght it from a friend with a white colour and silver inside and lots of durt and rust everywhere a year ago and finished it in around 4 months :)
i still need to get the acrylic for my side panel in the next few days
