DDR2_1100 3-2-2-8 done with Corsair PC8000UL + Intel D975XBX

Intel Conroe E6700es B0 Stepping with Tower120 AirCooling, Ambient=22c
Intel D975XBX (vdimm mod, alu_solid_cap mod)
Corsair PC8000UL 512m*2 @ 2.7v
WD Raptor150G
Zippy PSL-6701p (fan mod)

mod pic:
http://vic.expreview.com/attachment/front.jpg

http://vic.expreview.com/attachment/dimm.jpg

http://vic.expreview.com/attachment/pcie.jpg

http://vic.expreview.com/attachment/pwm.jpg


vcore+tcore
http://vic.expreview.com/attachment/vcore+mod.jpg


vdimm
http://vic.expreview.com/attachment/vdimm+mod.jpg

1. 2.7v 545mhz 3-2-2-8 pi_1m done. :banana:
http://vic.expreview.com/attachment/1150283870.jpg


2. 2.7v 555mhz 3-2-2-8 done ! :toast:
http://vic.expreview.com/attachment/1150283919.jpg

That is the sickest pair of ram that I've ever seen. Doesn't get any better than this. Sandra and Everest shot please!!

Very very good Victor!

Fastest and tight timings ever see with that clock :D

sheesh, that cap mod really helps, doesn't it?

Sick sick RAM for sure....:slobber:

give me some sandra shots with that ram and conroe :)

Quote:

---

Originally Posted by Vapor

sheesh, that cap mod really helps, doesn't it?

Sick sick RAM for sure....:slobber:

---

maybe the cap mod helps.
but...what really matter is the 1333fsb.
I've tried 1067fsb and 800fsb , very bad for ram overclking even I losen the ram timing by memset :(

but... 1333fsb is not so effiency as 1067fsb/800fsb.
pi running is slower , badaxe is a very strange mobo ....
and so do mem bandwidth, much lower than on ASUS.
don't know why.

INSANE! :slobber:

But the time is a bit slow indeed. (for a conroe :p: )

Thats a very extreme pair of ram you have there Victor.
Thank you for sharing! :)

Sandra BandWidth PLS!!!!!!

OMG :slobber:

Impressive VictorWang. You always surprise me ;)
I have curiosity of knowing as they don't burn the memoirs to those voltages. I find impressive :D

Greetings

Do you have pictures of your Cap mod??
Is it somthing like the Cap mod on P5WD2-P?

Also lets us se your PSU fan mod :)

Bowing ;)

OMG :D great chips ;)

how do u cool it when its running 2.7v?

Can't believe it!!!

u did a miracle!!!!:eek2: :worship: :worship:

Holy CRAP victor...that's insane...ridiculous timings and clocks there, 1100FSB kicks ARSE!!! :woot:

wtf? 2.7volt on ddr2? thats seriously sick!! but it pays off in the timings!

Man that's some super cherry picked ram. If chips like these exist in abundance, OCZ would probably be the first to market them and not tell us what the IC's are.

i'm expecting asus/giga/abit/foxconn/dfi/albatron's new 975x mobo.
too check out the real performance of this pair of stick.
intel d975xbx is really strange for overclking.
800fsb/1067fsb/1333fsb huge difference in performace per_clk and overclking ability.

OMG, great result :worship:
Did you pull off the heatspreaders and use some kind of cooling?

Woah poor ram having 2.7v shoved up it's rear end :D

well, I'm start thinking taht 975xbx + Conroe have a poor bandwidth, cause nobody post pictures!

I just got performance in ram here when using 1:1 divider, any other brings crap band.

Verry sick ram for sure Vic...
This only goes this high in axe mobo, what band on asus mobo?
Or asus doesnt support such high FSB?

Will you be testing with AM2 setups with these sticks having such tight timing capabilities? It'll be very interesting to see how they react in the other mobo's your gonna be testing.