-
new BIOS m606c_12.b02 for abit AW9D MAX
-
very nice Coolaler...
What voltage settings on cpu, mch etc?
-
Quote:
Originally Posted by raju
very nice Coolaler...
What voltage settings on cpu, mch etc?
all limit,but i think it's could be lower
-
edit: ah yes I just had a proper look at your bios screen shot for the voltages, sorry missed that..
I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...
What ram timings did you manage at 445fsb 1:1???
regards
Raja
-
Quote:
Originally Posted by raju
I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...
What ram timings did you manage at 445fsb 1:1???
regards
Raja
4-4-3-4
it's runnig again,i will show when it's finish
http://www.iamxtreme.net/coolaler/ab...dbiosb02_8.JPG
-
hehe
it's 4-4-4-5 but show 4-4-4-27:mad: (maybe i am wrong option,i will try again)
http://www.iamxtreme.net/coolaler/ab...dbiosb02_9.JPG
-
NIce Coolaler !! I will try
-
Good job coolaler :toast:
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?
-
Quote:
Originally Posted by Sicness
Good job coolaler :toast:
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?
some cpu maybe no working at ratio option,try it,maybe u can:)
-
Quote:
Originally Posted by coolaler
some cpu maybe no working at ratio option,try it,maybe u can:)
Chaps over at hardwareluxx.de tested it with 6400 and 6600 retail, no problemo :)
-
air condition is off,i am wet:p:
TM working,when temp higher
http://www.iamxtreme.net/coolaler/ab...biosb02_10.JPG
-
28°C? Poor you ;)
Keep it coming mate!
-
-
Coolaler one last request bro' if you have time, can you show us Everest memory bandwidth please???
http://www.angrygames.com//files/everesthome220.exe
Let's see what it scores on that 1066 strap at 445fsb..
regards
Raja
-
Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.
-
Well, i think that those results with Spi 32MB a little bit dissapoint. I have here same/better results with my P5W DH with less FSB and less core speed.
http://img95.imageshack.us/img95/5063/66002rc6.th.gif
I'm missing something here?!
-
-
thanks Coolaler, great bandwidth on the ram..
-
max nb and fsb voltages and all you did was 433 x 9
please tell me that that not all you got ?
throw some water on it.
that high on air is silly. WAY too hot dont you agree ? 82c ? ouch
-
Cooler, can you run the "Cache & Memory Benchmark" located under tools. I get 10320 read when I run it the way you did, but using the one under the tools section I get 9146 read. My 9 X 400 scores beat all my 8 x 445's.
-
Still no 1:1, even with this beta. Hope Tony gets his hands on this board :(
-
Again...
Quote:
Originally Posted by JohnMike
Any comments?!
-
Quote:
Originally Posted by JohnMike
Again...
Any comments?!
I have this board coming Monday or so. I don't want to be discouraging & want to continue to see others hard work, but I tend to agree with you. I don't think this board will be replacing my P5W DH.
-
hey coolaler.. what happen to your video card? burned it again? :D hehehe your very xtreme.. ;) ..its good Abit is supporting thier board.. :D
-
Quote:
Originally Posted by situman
Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.
No, those arent OCZ sticks being used (they might be under those heatspreaders though). Coolaler has those custom heatspreaders with his own logo on them.