DFi CFX3200 Bios setup for GSKILL products

DFi CFX3200 motherboard ONLY!
Please install RAM into Orange Slot!

F1-3200PHU2-1GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4




F1-3200PHU2-2GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200USU2=2GBHS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4



F1-3200PHU2-1GBNT

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBNT
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BIU2-2GBHX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 1 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-1GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-512ZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000BIU2-2GBHV

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000USU2-2GBHZ

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BWU2-1GBGH
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 2
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4800DSU2-1GBFF

Bios > Genie Bios Setting
FSB = 300
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 4
Tras = 8
Trp = 4
Trc = 8
Trfc = 14
Trrd = 2
Twr = 2
Twtr = 1
Trtw = 2
Tref = 4196
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4

would you mind adding one for GH?

i'll try

seems like DDS 1 and DDDS 4 for GH too
memtest 80% now

GH added, i am testing FF for TCCD now

FF added

i cant pass 260mhz.

someone help me?¿

I realise it's been some time since any posts were made in this thread, but it would really be great if I could get my hands on similar information for my RDX200 CF-DR. I'm having a hell of a time getting it running at 280x10 1:1 2.5-3-3-7 (it's done 310x10 1:1 2.5-3-3-7 on better cooling in another location with the same mobo/cpu/ram combo) and it's driving me crazy.

I realise that the RDX200 was kind of abandoned, but there has to be some end to my endeavor...

I'm using the F1-4800DSU2-1GBFF kit by the way.

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!:confused:

Well, considering the board this thread is about is for AMD SKT 939, i HOPE your ddr2 doesn't work in it...:lol2:

Quote:

---

Originally Posted by eXo_Ultimate

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!:confused:

---

F2-6400PHU2-2GBNS will not work on RD600. it is incompatible.

Quote:

---

Originally Posted by eXo_Ultimate

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!:confused:

---

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.:confused:

Quote:

---

Originally Posted by eXo_Ultimate

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.:confused:

---

f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

Thanks for your answers.Now,ı will sell the gskill memory and buy another ;)

Hello, I just got a cfx3200, i bought this mainboard so i could finally get everything out of my rams and cpu before i go for a new platform in a year or two.

My rams are the gskill F1-3200DSU2-GBLE, my cpu is an opteron 170.
When i put in a stick of noname ddr400 rams (512mb). I can get the cpu several hours of prime stable at 2900 mhz and 1.425 Vcore (10x290) (ldt=3).

Ive used those timings from another thread (nforce 4 thread)

DDR550
2,76V; HTT=3; FSB=275
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 2.5
Trcd: 3
Tras: 5
Trp: 3
Trc: 7
Trfc: 18
Trrd: 2
Twr: 2
Twtr: 2
Trwt: 3
Tref: 3684
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 3
Darm Date Drive Strength: 1
Max Async Latency: 9ns
Darm Response: Normal
Read Preamble Time:6ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
Burst Length 4

With those settings and the cpu running at a multi so its as close to its natural clockspeed (8) It is 10 hours memtest stable, but in windows it will crash within a minute while im prime testing (torture test in place large FFTs).

Ive tried lots of different things, losening all the timings and trying on higher lower voltages, I even tried a different cpu (Venice Core). But either it doesnt get into windows at all or prime will crash in seconds.

I hope someone is still willing to help me with this board, thx anyway.


edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in

Quote:

---

Originally Posted by Flip Trip

edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in

---

you have another pair of FF, i don't get this part

No i just used those settings(from your first post in this thread), the main thing is that its kinda stable with one stick, but not with two.

Quote:

---

Originally Posted by G.S Technician

f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

---

Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.:confused:
İf it's works with 965 chipset should be works with rd600 too

Quote:

---

Originally Posted by eXo_Ultimate

Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.:confused:
İf it's works with 965 chipset should be works with rd600 too

---

some of them are ok to run if we reprogram it. however must of them are not ok. you are lucky :) to get a P965 working one

i cant seem to get 4 sticks fo 2gbhz working. i get "C1" LED debug code. both pairs of ram run fine alone in both the yellow and orange slots. i have set CPC to 2T. anything else i should change?