Printable View
I haven't actually got an Asus Rampage II Extreme yet, however, I wondered if anyone out there who *has* experience high Northbridge (NB) temperatures, either at idle or full load when overclocking?
I will have Panaflo 120x38mm 86 CFM fan blowing air over video card/NB area from the front of the case, but don't want to fiddle with the board, i.e. re-applying TIM on the stock heatsink, installing a third party heatsink, etc.
Thanks.
You will be fine, I have an Antec Spotcool blowing over the rams and IOH. Temps will be around 60°C when it get's some air flow... SB also get's quite hot due to the heat generated by the IOH
NB max I saw was 60 and SB max I saw was 54. Got all the temps on G19 LCD display. Stock cooling. NB heatsink is bend a bit to fit titanium sound card.
X58 board always hot!!!
Yes, I decided to buy that Antec Spot Cool fan, and will point it towards the NB area, great idea. I found lots of 40mm fans, but never found a good way to attach them, so this Spot Cool fan seems to be the logical choice.Quote:
Originally Posted by Leeghoofd
Your temperatures are quite good, considering I've read a lot of people who have higher. Your NB was bent? How come, did you do that or was it like that from the factory?Quote:
Originally Posted by Papagaj
With the Spot Cool I get +/-45°C IOH and 45°C ICH... compared to the Gene II which is always in the 60°C range with the same cooler :) Mind you my case is always open
What case do you have? I'm going to use the Antec P180 Mini. If you have photographs of the inside of your PC system, I'd appreciate seeing them. I've not worked with mATX before and photographs would help me see how everything fits together, and the spaces between the components. Thanks.Quote:
Originally Posted by Leeghoofd
Big Lian li for the I7 setups ( normally it houses my WC setup with triple rad on the top ) Tonite I will take a piccie of the Gene II and the normal RE II (I hardly think the RE II will fit into an Antec P180 mini ) as the mobo is bigger than normal ATX format
GENE II Piccies :
http://users.telenet.be/OAP2/Gene%20...20II%20020.jpg
http://users.telenet.be/OAP2/Gene%20...20II%20039.jpg
http://users.telenet.be/OAP2/Gene%20...20II%20030.jpg
For me it's an incredible little board packing some serious punch
Thanks for the pictures, your system looks great. That board looks tiny in that case! I'm going to house it in an Antec P180 Mini, so I'm trying to find pictures of that to get an idea of how everything looks once installed. Look forward to seeing more pictures, I've yet to receive my board. Thanks again.
Well i did it by myself to fit Titanium card. I think that's NB heatsink that i bend:p:Quote:
Originally Posted by aln688
X58 alway hot!!!
It could be the location of the X58 on those particular boards that causes it to get so hot. At least one user here on XS has reported quite a bit lower temps on his P6T7 for the NB even though that board has two NF200's on it. But the difference is that the P6T7 has a relocation of the X58 chipset over to the right side of the PCI-E slots.Quote:
Originally Posted by PatRaceTin