-
E8xxx/Q9xx0 FSB 1600 pin mod
-
wow looks extremely easy. so all you have to do is don't let those two pins make contact with the mobo pins?
-
-
shouldn't that theoretically work will all 775 based cpus?
-
which would be the real benefits? ... one is the core that would use 400 FSB with default voltage ... but any E8400/500/600 can do 400 FSB without touch voltages even going more beyond the 400 FSB .... the gain would then be in motherboards that not to allow "play" with overclocking FSB or not?
-
Quote:
Originally Posted by
hersounds
which would be the real benefits? ... one is the core that would use 400 FSB with default voltage ... but any E8400/500/600 can do 400 FSB without touch voltages even going more beyond the 400 FSB .... the gain would then be in motherboards that not to allow "play" with overclocking FSB or not?
Yep. I know a guy with 20 Dell Vostros folding on Q6600's and he pin modded them all to run at 3.0Ghz so a little boost for a non OCing board :up:
-
Very useful anyone tried it out yet ?
i would but i don't have any 775 platforms left :(
-
Can I Do It For My Quad? 400*8.5=3400 MHZ?
It's Safely For CPU?
-
-
ok nice find but i dont see the point but very nice ... just two questions, what tape do you use for pins, and wouldnt pins on the board cut threw the tape when you put your cooler and thighten them, i wonder could you bend the pins ???
-
Quote:
Originally Posted by
dejanbinladen
ok nice find but i dont see the point but very nice ... just two questions, what tape do you use for pins, and wouldnt pins on the board cut threw the tape when you put your cooler and thighten them, i wonder could you bend the pins ???
I was wondering the same. Electrical tape would probably be the best, thin but with sufficient give!
-
It can help with mem dividers om some mobos they are usually different whit 266-333-400mhz fsb boot
-
yeah looks great to me buddy.
-
very interesting mod. is there any case to do it on an atom 330 ?
-
Does it Work With Any 775 Intel Chip & On Any Platform Too??
-
How the hell did they come up with the idea of cancelling two pins ? ? ? ? ? ?
This is insane and rocks! Great mod!
-
Problem, can this mod improve the stability after 400MHz FSB? Otherwise, why are we needing it?
-
Quote:
Originally Posted by
Dr.Paneas
How the hell did they come up with the idea of cancelling two pins ? ? ? ? ? ?
This is insane and rocks! Great mod!
Have you ever overheard a conversation between two electronic engineering students? It's like listening to Swahili with a thick Welsh accent.
-
The mod is for getting better chipset multipliers and better mem diveders to boost mem performence
-
This mod would be for people that bought a premade computer from HP or other companies that dont allow you into the bios.
-
hmmm my board is broken so i cannot overclock using the bios so i wonder if this will work?
so electrical tape on those pins will work?
-
It didn't work with my asus commando + e8400 C0 :\
Is the mod supposed to insulate both pins contact from the board only or insulate+wire them?
i used this black regular insulator tape
http://www.diytools.co.uk/diy/Images...2__38614__.jpg
have i done something wrong here?
-
hi guys,
im wondering if this mod will work with my E6400 or it's only work with E8xxx cpu?:confused:
-
I have an asus p5kpl-vm matx board - will my board do 1600 fsb or will the mod work? Thanks guys.
-
Hmmmmmmmm
So all you need is electrical tape and scissors right? are there any risks of a nuclear explosion?