E6600ES on Vapo LS benching..

Printable View

08-09-2006, 05:46 AM
SIOUX

E6600ES on Vapo LS benching..

Hi Guys:)

I played around with my E6600ES Step 5 B1 yesterday, under my Vapo LS. heres what i got so fare.

3d01 was not so good, course i´m in REAL need of some more GPU power now. that was the bottleneck. it was funny to watch that Dl and DH did not improve score at alle from 4150mhz to 4450mhz. it just stayed the same as when i benched with water:D CF here i come :D

I lost the bad axe some time after the bench. it worked fine for some time, but then sudely after a reboot, did not turn on again:(

There is plenty of mhz left in the cpu. these results was done with only 1.56v. i need to do vmch mod:)

Intel XBX 304 (pin modded . No vmch or vdimm mod) DEAD !!
E6600ES
G.skill PC8000 1GBHZ 2.2v
X1900XTX Chilled water
OCZ GameXtreme 700w
Vapo LS

http://img71.imageshack.us/img71/404/p1010181xt9.jpg

http://img81.imageshack.us/img81/3117/p1010182ln7.jpg

http://img301.imageshack.us/img301/1568/11438ya9.jpg

http://img301.imageshack.us/img301/8357/70789fx8.jpg

http://img235.imageshack.us/img235/6483/16869ni0.jpg
08-09-2006, 05:53 AM
bullet2urbrain

dARE i say it?

Xtreme.

Sorry to hear about the Mobo, what was the FPS increase when you increased the CPU on DL and DH? how CPU limited are you? im thinking of running similar setup but @ hopeful speeds of 3.6ghz CPU and x1900xtx @ ???/???

but im concerned now that i will be GPU limited also.

Thanks Sioux and Great work.
08-09-2006, 06:00 AM
Viss

Very nice Sioux :toast:
08-09-2006, 06:00 AM
SIOUX

Thanks:)

Sorry if i was not clear:) I´m def not CPu limited. running only 1 X1900 is the bottleneck for sure. DL and DH did not inprove at alle on a 300mhz cpu increase:)

Quote:

Originally Posted by bullet2urbrain

dARE i say it?

Xtreme.

Sorry to hear about the Mobo, what was the FPS increase when you increased the CPU on DL and DH? how CPU limited are you? im thinking of running similar setup but @ hopeful speeds of 3.6ghz CPU and x1900xtx @ ???/???

but im concerned now that i will be GPU limited also.

Thanks Sioux and Great work.
08-09-2006, 06:07 AM
rapty

What Clamshell did you use?
08-09-2006, 06:14 AM
SIOUX

Quote:

Originally Posted by rapty

What Clamshell did you use?

I just pulled up the clamshell, so it would not touch the components next to the cpu socket. I then used som speciel screws to make it fit with an old s939 kit:)
08-09-2006, 06:14 AM
perry_78

Hej, you never sent me the PM when selling your extra cpu on hwt :)

I like the attachment of the LS :p:

Btw my offer to send you the mousepot still stands if you feel like using it :)
08-09-2006, 06:17 AM
SIOUX

Quote:

Originally Posted by perry_78

Hej, you never sent me the PM when selling your extra cpu on hwt :)

I like the attachment of the LS :p

Thanks Perry ...please refresh my memory about a chip??:) (in a PM)
08-09-2006, 06:18 AM
Moonman

Good work there SIOUX.

It's just funny to read, that you are GPU limited with slightly overclocked XTX.
Monster CPU power. :eek:

About the BAD AXE dying. I've read somewhere on XS, that they can't take (can't handle) sub zero cooling.
Will you get yourself a P5W ?
08-09-2006, 06:21 AM
SIOUX

Quote:

Originally Posted by Moonman

Good work there SIOUX.

It's just funny to read, that you are GPU limited with slightly overclocked XTX.
Monster CPU power. :eek:

About the BAD AXE dying. I've read somewhere on XS, that they can't take (can't handle) sub zero cooling.
Will you get yourself a P5W ?

Thank you:) no, i think i will stick to the bad axe. this one did 493 (chilled water)unmodded, and i like the stabilty when oc´ing. if i can get one more like this i will be happy. but if it turns out that i will loose the next one to subzero also, then i will go for something else indeed:)
08-09-2006, 09:21 AM
Gebba

611mhz on the memorys!!!
that is very nice :D
08-09-2006, 09:33 AM
200%absolut

Hi,
what was the memory step 1066 or 1333 ?
08-09-2006, 11:23 AM
Dani

Nice score there, SIOUX, but not so clean setup:D

You should not use that plastic under mobo, use something else:eek:
08-09-2006, 11:51 AM
perry_78

Quote:

Originally Posted by Dani

Nice score there, SIOUX, but not so clean setup:D

You should not use that plastic under mobo, use something else:eek:

Why? it'll only conduct the electric charge along its surface :p:

But yeah, using an anti static bag under the motherboard just might not be the greatest idea.
08-09-2006, 12:04 PM
SIOUX

Quote:

Originally Posted by Dani

Nice score there, SIOUX, but not so clean setup:D

You should not use that plastic under mobo, use something else:eek:

Thanks Dani :toast: its an antistatic back that came with a abit mobo, so no worries :)
08-09-2006, 12:10 PM
Frisch

I was wondering about your 0 ( you know what i mean ), so this is why :D

That should produce some extreme crunching power, i'm scared to death. ;) :D
08-09-2006, 02:13 PM
Gorod

Hi SIOUX , i was watching you on the ORB (i am in same single X1900XTX category with you :toast: ) and i must say it's a very impressive job u done with that single X1900XTX and 6600 :eek: Hats off :clap:

We have a lot of work to be done to catch up with you :D , you are a truly master - great job SIOUX and congrats on WR with single X1900XTX :toast: :woot:

http://img345.imageshack.us/img345/6603/siouxbt5.gif
08-10-2006, 01:28 AM
SIOUX

Thanx A lot guys :toast:
08-10-2006, 06:54 AM
ahmad

70k is impressive for one card. Nice :)
08-10-2006, 07:04 AM
blind_ripper

very nice scor's there , cant wait to see what mine will do whit dice and a E6700 :p:
08-11-2006, 03:49 AM
rapty

Quote:

Originally Posted by SIOUX

I just pulled up the clamshell, so it would not touch the components next to the cpu socket. I then used som speciel screws to make it fit with an old s939 kit:)

Would you say the old 939 Kit would be a good idea for 24 / 7 use?
08-11-2006, 03:55 AM
SIOUX

Quote:

Originally Posted by rapty

Would you say the old 939 Kit would be a good idea for 24 / 7 use?

oh no....i would not recoment that:)