Any know V Mod about this board ? ussually with V Drop ? :) :)
Printable View
Any know V Mod about this board ? ussually with V Drop ? :) :)
Ya, i would really enjoy a few mods here aswell, weres Johnny or Hipro5:p:
--cheers--
Vdroop & vpll mods are sorted ;) Will post pics soon
What other mods do you guys want ? :)
how about vmod for the cpu VTT max on 1,6v
love to try above it :D and see how it goes
Sorry for the delay guys my laptops died so I'm gonna have to host of imageshack for the time being. Both mods are tested to be working :) Pics up in 6-8 hours after I get home from work!
Vdroop
http://img99.imageshack.us/img99/8272/dscf0833je3.jpg
1Kohm variable resistor preset to 500ohms seems to do the trick!
VPLL
http://img404.imageshack.us/img404/5451/dscf0834ah3.jpg
Not easy to solder!!! I suggest you put the VR beside the Inductor like so
http://img45.imageshack.us/img45/6685/dscf0838yj1.jpg
thanks for the mod bro ill try the vdrop as soon as i could :D
anyway what is vpll?imch?
i think its ICHIO on abit since its default value is 1.5v, same as VPLL default on Asus mobo.
Thanks Johnny.......almost the same with vdroop mod on ABIT AB9 Quad GT by the way nice work :) :)
Anybody tested high voltages (2V) ? Any OVP problems, vcore needed?
I don't have the board yet, but will need that soon when I do :D
Cpu vocre max 1,9v with b02 beta bios , I need more vcore , Cpu vtt mod:) Jonnny and Hipro where are you :D
yup like i said before i would love to have more than 1,6v :D
but what is vpll anyway?if vpll is ICHIO why need so much?couse i try to raise mine it didnt make any effect?
1.9v oke with bios but ı need over 2V :D
it's really bad support with mods for this boards
it will be Asus for me next time
@Brandybuck bi abit ix 38 anakartı çözemedin gitti:rolleyes:
@johnny
on my board the max vcore is 1,9v so i think it was BIOS limitation
so could you give us some cpu vtt mod :D
Will sort out a cpu VTT mod - beta bios 06 and onwards offers up to 2.11volts!
CPU VTT mod figured out will test tonite then post pics ;)
btw you'll need to take off the NB cooler in order to do the mod, don't worry it'll fit back on once it's done ;)
hehe as long as it work (which i believe so,like always) :D i got no problem with that...
btw i still dont understand if we need more vpll?which andre said it was ichIO ?