Printable View
http://www.lian-li.com/Product/Chassis/S_C_PC-G70.htm
http://www.lian-li.com/Product/Chass..._PS_PC-G50.htm
http://www.lian-li.com/Product/Chass..._C_PC-V600.htm
these are the new 3 cases of lian li....
i want something a little bit smaller than the PC G70 or a little bit larger than PC G50 something like PC G60 xD
The sliders a nice thing, but an old mod... I like that g70 alot!
I like the G70 plenty of room in there
Talk about ripping off a design (v600) coughCMSTACKERcough. :rolleyes:
Rest look OK, nothing 'wow' about em.
are these for sale yet?
I like the V600.. I found them on Froogle but I wasn't familiar with the company..
Sorry, but i don't see how it resembles a CM Stacker in the slighest. It looks exactly like a mini-V1000 imo.Quote:
Originally Posted by OmegaMerc
I like the V600 a lot. If they are reasonably priced, I might pick one up.
Indeed, looks like it's quite space efficient with that sideways-mounted psu. And not too tall, which is nice for small fileservers. Was looking at the Antec Sonata II, but this one might be a better choice.Quote:
Originally Posted by lowfat
I really like the V600 as well....I'd prefer a V800 though ;)
...or even a V400. :D
V600 is kind of an awkward size, IMO....but I really like all three, tbh.
I like the G70, but I would have preferred if it came with 8x 5"25 drive bays, like the PC7077 and a HD cage, so you can place your HD wherever you want.
Ah, a "case" of taste, uhmmm, thumbs up V600.
Taste can start the most amusing fights.
Damn.. there are no reviews of this PC-G70 whatsoever. And i could get one black or aluminium colored if i wanted here in Finland.
The question is IS IT better than lian li 7077. PC-G70 ~220euros and 7077 ~280euros.
Neither of them are that good for my triple radiator but it can be solved by modding a hole on the bottom.
they have got a few more new cases:
pc-s80: http://www.lian-li.com/Product/Chassis/S_C_S_PC-S80.htm
pc-007: http://www.lian-li.com/Product/Chass..._PS_PC-007.htm
pc-101: http://www.lian-li.com/Product/Chassis/M_C_S_PC-101.htm
pc-201: http://www.lian-li.com/Product/Chassis/S_C_S_PC-201.htm
the 101 is basically a v1000 with a new front, the 201 a v2000 with a new front.
the 007 looks like a normal pc-7 with led fans.
the s80 looks all new though.
i really like the look of the s80 and the 101/201, though im a bit sceptical about their airflow, those doors look like they block the fans on the x01, and in the s80 its totally weird.
I do like lian-li's an internal quality which I have found unmatched, sometimes a stale design but v1000 release changed that. Bringing pc cases to surpase apple's ;)
Proud owner of PC-61 and V-1000.
V600 looks pretty appealing, but I'm not too sure about the front intakes on the G70 & 60. And that stripe on the new silent looks kinda dodgy...maybe it makes it go faster! As long as it's Lian Li it's gonna be quality anyways :p:.
i think its good for a company to have two or three discreet and serious looking cases in their product range
as they stand out of the rest of the market
but i 'm afraid that LL has lost its creativity and serves us warmed food over and over again
those new cases look dull
PLZ! anodize some aluminium and make some blue and red and platinum cases
PUT SOME DETAILS on them to contrast the clean and cold look of the aluminium
do something
imho
quality is good but is not always enough to give a product the place it deserves in the market
especially as competitors like Silverstone, Coolermaster and those other expensive Jap cases
are already starting to come out with more innovative and interesting products
making it up with a lot of details and colors, isnt that what thermaltake does?
the silverstone tj07 looks great though, both in looks and as a case, but if you find the newer LL cases dull, how come that doesnt?
My opinion is that lian li look comes exactly from looking simple but elegant. Its so simple with all covered with brushed aluminium and all so it looks wery good and expensive.
With lots of colors and blinking lights and plastic it would look s000000 cheap.
What do you think if id mount this: http://www.alphacool.de/xt/product_i...&cPath=5_34_35
and this: http://www.alphacool.de/xt/product_i...cPath=5_34_160
On top of each other on Lian Li PC-G70B side panel: http://www.newegg.com/Product/Produc...82E16811112105
Would it be sweet huh ? :p:
But the problem is if the sidepanel bends a lot cus its aluminium. Id propably need to strenghten it with something. The total weight of those heater cores is more than 7kg.
I doubt the triple 120mm radiator could fit on the bottom with that HDD rack.
The MO-RA2 Pro is going for my cpu and Nexxxos Extreme 3 for GPU and chipset.. maybe HDD block too.
If id want more coolingpower it would be a Vapochill LS or similar :)
i like the V600,
Aaawwwwww a baby V1000 :)
Nice cases, I love the simple design.. Nothing too flashy. I still love my PC65, and aside from 80mm case fans, the design seems timeless.
I love Lian-Li cases. True classics & fit N finnish are second to none. usen a PC-71 case now & just it seems to be made for H2O cooling... inexpensive too!
Here are some pics from CES that we took--
http://img467.imageshack.us/img467/8...arge8ew.th.jpg
http://img467.imageshack.us/img467/1...arge8nw.th.jpg
http://img467.imageshack.us/img467/2...arge6hg.th.jpg
http://img413.imageshack.us/img413/4...arge6od.th.jpg
http://img467.imageshack.us/img467/1...arge7ix.th.jpg
Now they just need to make them cheaper.
Some of them are already in stock at, Newegg.
they were really cool! especially the smaller ones
I love the G70.
I have a PC71 and I'd only change her for a new black G70.:p:
Just say and i go and buy myself a G70. Im kinda buying it but not but i WANT to buy it. My Aerocool Mastige is not that spacious and id like some space and look of quality.
trouble with the sideways psu is that it will interfere with the cpu cooler. can you imagine a ninja under there? i dont think so. certainly not an si120, the fan would be blocked by the psu.
They all look really cool. Like the new G70, looks like a nice PC-70 remake. V600 looks nice as well, I might get one for my old Win 98 comp (lol yes, I have a Win 98 comp, I play my old skool games on it). The PC-S80 is the only one that gets a complaint from me, and that is that the line going down the middle... Kinda wierd to me :stick: But the others look really cool.
N00b of l337, I agree with you 100% on the price. I almost crapped my pants when I found out that a PC-V2000 with window would end up costing me approx. $400-500Canadian shipped to Canada :eek: .
Usama aka Ferrari Freak
Its just sick. I bought myself a Lian Li PC-V2000 and its just sick. I cant stop loving it. LOTS AND LOTS OF SPACE and LOTS OF QUALITY APPEARANCE. I dont mind that there is a little less airflow out of the case than in my aerocool mastige which had 3 120mm fans blowing out. And less space for watercooling without modifications. Its still just amazing.
The looks and build is amazing lol.
I like the v600... €139 at my local store... but I still prefer my v2000... :D
Maybe a nice case for the wife.. as she drools all over mine. LOL
The G70 is a lovely case - it's well built and well designed in my honest opinion. It's much better than the older range of Lian Li's.
G70 is nice, but a bit too big, G50 is nice but I don't like the PSU placement :/
G60 anyone?
g60 would be nice.Quote:
Originally Posted by unclean
g70=too big
g50=too small ^^
I'm really liking that g70 but unfortunately cant afford it:(
will there be a window for the G70?
Buying a case for being flashy and bright is like buying a civic with a wing on the back and 10lbs in stickers. Not everyone wants rice.Quote:
Originally Posted by SlackerXL
I am liking that G70
http://www.performance-pcs.com/catal...oducts_id=4258Quote:
Originally Posted by ReD.SkY
Says there is a factory window option.
G70 is a great case to mod for H2O cooling... :D
Looks like there are two more new LianLi cases
PC-101 http://www.silverpcs.com/product/CS_PC101B
PC-S80 http://www.silverpcs.com/product/CS_PCS80
Here goes some pics of my lian li case. Its a v2000b http://rigshowcase.com/album_folder....VBUzG&f_id=379
Lian-Li certainly has some interesting stuff coming out this year. :slobber:
Very nice! :up:Quote:
Originally Posted by ProphetX
thanks
Pretty sweet cases, I'd love a Pc-75 but they are wayyy too expensive.
yeah these lian li cases are a work of art. Kinda like the gucci of pc cases.
So who is going to be the first one to get one of these?
KLI-G50 ;)Quote:
Originally Posted by unclean
http://akiba.ascii24.com/akiba/news/...61187-000.html
Normally, the w75a and w75b could be usedQuote:
Originally Posted by ReD.SkY
Looks like you can win the PC-S80 over at BoxGods.com http://www.boxgods.com/forum/viewtopic.php?t=294
g70 looks like a beautiful case, would like to add it to my collection
Here's my totally radical G70, anodised in metallic copper with a special finish, and powder baked internally. Gotta love that attention to detail ;)
http://www.extremeprometeia.com/PICS/g70/copper G70.jpg
http://www.extremeprometeia.com/PICS/g70/copper4.jpg
http://www.extremeprometeia.com/PICS/g70/internal.jpg
That's the glossy black finish (coated twice and lacquered for extra protection). It's now very difficult to scratch!
Looking good there phil - excellent work as usual.
The best the UK has to offer by a mile.
How did ya find the powder coating with lacquer finish? I would imagine a lot of preparation is required to get it looking so tasty?
Cheers Mav.
Indeed the down side to it all from my point of view is the preparation required to get the case ready for anodising/powder coating. It's not just a matter of supplying "as is" you have to strip the case down totally before it can be worked on. The finish is excellent though.
looks very good! did you buy it like that from some shop, or did you do everything yourself?
Very nice Phil. Great job.
Usama aka Ferrari Freak
Not too fond of the colour scheme, but that's some frickin excellent work :toast:Quote:
Originally Posted by phil stanbridge
phill, you have way too much time and money, thats an AWESOME case :toast:
That looks GREAT!
lol I wish I did have too much time and money then you really would see some stuff :DQuote:
Originally Posted by MeltedDuron
why thankyou :) Cheers for the positive comments. I realise the colour isnt to everyone's taste but it really is better in the flesh.Quote:
Originally Posted by MrSlacker
btw, u made 2 identicle cases?
Not identical, but yes. One was at I27 (and is featured on Bit-Tech) and soon to be in CustomPC.Quote:
Originally Posted by MrSlacker
That is so cool ;)Quote:
Originally Posted by phil stanbridge
Great work! :up:
I had a motorbike painted in a similar color... :cool:
How much did it cost u?
I own EP-UK the company that does the work ;) It costs you the case (obviously) in the first instance (anything up to £170 here in the UK) plus the modifications to the panels/laser cuts etc, and the anodising itself costs anywhere between £150-£220 depending on the type of finish you go for. Metallics with Ultra-Glow are more expensive than matts.Quote:
Originally Posted by JoeBar
Quote:
Originally Posted by phil stanbridge
you have PM, about this case :toast:
id like to know where i can send out parts for laser cutting in the us.
i can get stuff anodized for free :D
I get parts laser cut for free, only problem is that the metal 'warps' upon piercing/cutting [too much heat.]... not a big deal for parts like the case top [Once it's forced down, not a problem.], but I'm worried that a window or something along those lines would bow out.
Need to look up cutting conditions for anodized aluminum. o_o *sets off*
einCe--contact any local factory with a laser, see if they'll do it for you. If you are only ordering 1 it'll be expensive, as there is usually a setup fee involved (for loading the programs onto the laser/etc.) that is a relatively large amount (considering the job.) So the cutting may only be 5 bucks a part, but setup is 50 dollars/job...
So if you make
1 part, 55 dollars..
2 parts, 30 bucks each..
3 parts.. 21.66.
4..17.50 each.
And eventually the savings start to slip to nothingness between parts, but you get the point.
Moral of the story? Get some friends to buy the same case as you, and do the same thing to all of them [cut wise] :P
You'll save yourself loads.
--Trevor
Edit: Just talked to the laser operator/programmer. Apparentally they fixed the problem with aluminum warping--they were cutting with a high enough wattage [2500W], but it was moving to slow. They picked up the feed speed, dross is no longer an issue, and neither is warping.
w00t, eh?
Wow Phil, that is aboslutely gorgeous! I love that bronze color and I think I was just convinced to go and buy one of those G70's.
Where do you find people to do that?!?!?!?Quote:
id like to know where i can send out parts for laser cutting in the us.
i can get stuff anodized for free
Cuz I want mine to be blue now :)(shiny blue :)
great job with those lian-lis', i'm moving to the akasa eclipse 62, perhaps the outside isn't fine :stick: but the space inside and mods i'll apply will chage it's look dramatically. just cant wait to start my HUMMER Akasa mod ;D
oh my that looks amazing. I have now decided that the G70 is my next case.
has anybody heard about a lian li pc 343B? i have seen it on the site of a belgian shop, and it looks like a ufo2, but with the lian-li style. i like it, but cant find anything about it, except in a german shop.
it looks like this:
http://www.jaha.be/contents/media/pc343b_380.jpg
and here is the link to the german shop:
http://www.pc-cooling.de/de/Geh%E4us...+Netzteil.html
It's funny you mention this: Just the other night one of the guys here put me onto this case. Since I'm a Lian Li Fanboy and I like cubes for servers this grabbed my eye. After a lot of searching I found this:Quote:
Originally Posted by skane
http://forums.bit-tech.net/showthrea...7&page=2&pp=20
and this:
http://www.microplex.no/product.aspx?pid=PC343B
So if your rich or famous and ordering one, get me one too!:D
you dont have to be that rich, its about €280, a lot less than you would pay for a mountainmods u2-ufo over here in europe, and its got about the same amount of space, and looks better.
i want it, but since im still a student, where did i leave that lottery ticket....
280 euros by the time it got to me in new hampshire would be $500.00 USD..
I have a PC30,PC70 and a PC76..that one would look nice here replacing a Supermocro SC850 cube I have..but not $500.00 nice!:D
i forgot to look where you are from, indeed, shipping to new hampshire would cost a fortune for something that big.
1st review of that PC-V300 SFF poped up http://www.boxgods.com/dept/htpc-sff...Article&ID=212
The pc-a10 looks exactly like the TJ-07 except with out the curves. Still looks a nice case though. I bet it will be $300 like the TJ-07.
Are any of these even available yet to purchase?
Don't count on it. There aren't even large pictures available :p
i recon they will be available in a few months, a google search on them doesnt give any usable results.
First review and high-res screenies of the PC-A10B. Now I just need some of those same screenies of the A10A and a pricepoint ^^.
http://www.caseclosed.co.uk/review_lianli_pca10.htm
btw: it did rather good in the review
Wow thanks for the link. I tried google and nothing came up. Will read te review.Quote:
Originally Posted by Hooker
I want this case so badly.Quote:
Originally Posted by skane
Quote:
Originally Posted by Hooker
i am now a lian-li fan.
although i don't have the $300 it will probably cost for spening on a case...
PC-A10B..very nice case wonder if you could get PA120.2 in the top, bottom or front.....
The top should be possible. There's quite an amount of space (height) left for the PCB of the fan-controller. Sacrifice 1 * 5,25 slot and you can probably fit the shroud with fan's as well...
Finally, they're starting to come into stores in the US. Now it's just the wait for the Europe based stores to get some packages from Taiwan ^^.
Price:
A10 - $230
http://www.coolerguys.com/lianli1.html
http://www.sundialmicro.com/Lian-Li-...ases_1703.html
I mentioned this case to movieman in an email before I left for vacation. You can purchase from: performance-pcs.com, frozencpu.com, xoxide.com and, I think a few others by now. My case arrived and it is very similar to xoxide's cube case--but has the Lian-Li name on it (even though not designed by Lian-Li). i really wanted this case because I can mount a triple radiator vertically in the front of the case with no mods required. Keep in mind, that the price tag goes WAY UP when you add all the components you may need. The case is extremely well made-no doubt about that. The first thing I will do is spray the inside with a black rubberized auto undercoating to eliminate all vibrations, and then build the system. should be complete (with 8800GTX SLI) in a week or two. Now I have to wait for Crysis to come out in June sometime!
you bumped a 6mo. old thread for this?Quote:
Originally Posted by warpete
Gift from Lian Li at the Cebit.............. Thanks Lian Li.
http://ediejo.nl/Fotos/LianLiTampei/4.jpg
This will be the Extreme Lian Li II
Phase change and water cooling will come in the case.
Thanks warepete! Hell of a memory!:toast:Quote:
Originally Posted by warpete
Some people just like to follow up. I think he knew how hot I was for that case.Quote:
Originally Posted by stormshadow
What model is that one?Quote:
Originally Posted by Ediejo
Thanks.
No gift from Lian Li.........Thanks Lian Li! :mad:
:p:
I don't know why I never like Lian Li cases.
They are like sex. You have to have had it to appreciate what you didn't have before!:DQuote:
Originally Posted by Ashraful
Just great cases.
I have a PC30,PC70,PC76 and a G70..
They are all beautiful and each in it's own way.
Next case I get will be a 343B.
Honestly, that is the only piece of PC hardware that I want.