:toast:
#2 on the orb, not too far behind Oppainter. Can he grab #1 before nvidia G70 blows all Ati scores away in 2001 ?
Regards
Andy
Printable View
:toast:
#2 on the orb, not too far behind Oppainter. Can he grab #1 before nvidia G70 blows all Ati scores away in 2001 ?
Regards
Andy
pure pwnage :toast:
That's a crazy score,indeed.Dothan power !!!
He need a X800XTPE though to break 45k.
Simply amazing score :toast: Fantastic job :)
cool.
for the lazy
http://service.futuremark.com/compare?2k1=8612006
Excellent example of Dothan power - almost 3.48GHz 3D stable is just sweet! One of the best benchers at work :toast:
But it looks like k|ngp|n did not clock his X850XTPE as high as he did last time, when benched 3D @ 3.35GHz (~860/700). So we might gonna see OPP's 3DM01 record being taken down very soon ;)
Good luck k|ngp|n :thumbsup:
I have enough left to take #1 01' I think....ran out of ln2 on my last 03' run around 4:10am :). Mark 03' single card #1 is a good possibility too.
http://pic8.picturetrail.com/VOL256/.../100407817.jpg
http://pic8.picturetrail.com/VOL256/.../100406952.jpg
http://valid.x86-secret.com/show_oc?id=22986
Impressive work Kingpin :clap: , as usual, that PentiumM really rocks, how about 05?
Damn nice work! Where's OPP and Macci? Kingpin and The Stilt are taking over! :)
Very nice results.
And only 1.632V for this clocks?
Are you doing this all by your self or you have someone that helps you with LN?
Respect :toast:
Congrats on the scores kingpin :toast: You're really smoking it up with that Dothan!
Grats Vince, you're doing real good :toast: GL with some more LN2.
Though I was looking, and that 329.3fps Nature with 837/694 X850 clocks kinda sucks :( Did you try those timings I PM'd you about?
I was going to ask you, which card you think would be better (since I have to get a new one, and benching 2001SE is my primary goal).... the X800XTPE or X850XTPE AGP. I know the X850 scores lower per clock, but I figured the chance of it getting higher clocks was a lot better.
However, looks like even higher clocks doesn't make up for it in 3D-2001 =/
So you gonna throw that X800XTPE in there on LN2? :D
very impressive!!!
I'm going for all out max clocks with x850 on these 01' runs. WHen I run max clocks on the card, it only likes default timings and trp@5 not to mention IM stuck using 5.1 cats because I cant force the older drivers on the agp card, only the pci-express version. X800xtpe with cat 4.12's on ln2 will be better no doubt. Now I'm thinking I can take #1 pretty easily with x850 around 860-870/700+ and cpu@3500mhz. I almost had that run completed, before I ran out. COuldn't get a good CL, must have re-ran 30 times in a row ,then I just ran out of ln2. Rig was running so strong.Quote:
Originally Posted by twilius_basic
Try WinXP SP2. Also use the MPS Uniprocessor instead of the ACPI Multiprocessor, works much better with the Dothans.
That is one kickass score though :worship:
No ricky/pedro tweaks used on my 01' run. mps unip tweak gives about 150 point boost in 01' with win2k. Also, my bus speed at 249 is a joke. At 270x13(3500), that score is over 45k easy. My ram can do 275, and the cpu can do 3500mhz for 3d. It'll happen.Quote:
Originally Posted by Gautam
LOL 233 LH with 249 on my ram.... :P.
Watch lh and ch skyrocket when I raise the bus speeds.
46k possible now I'm thinking.....8 days and counting to make it happen.
Thats some serius bad ass benching KIngpIn:)
http://www.forumspile.com/That-Is-Excellent.jpg
Bravo ..well done .. you got the 1st place on 01 (Nvidia stupid scores based on Nature don't count) ..
The second best is OPP ATI score with almost less 700 points - vid. card and cpu almost at same speed - what humiliation for AMD, beaten with CPU that cost less than half the price of the FX !!!
Congratulations K|ngP|n for the 44K, now I need to find another goal ..but I'm very happy that was you that did ..you are excelent overclocker and truly deserves to be a Xtreme Legend :toast:
FX-55's simple don't do 75% benchable period ..even on one of the best cascades in the world ..the near was my 4ghz 0.13m FX-55 but not 3D benchable by any means..Quote:
Originally Posted by Troman
The next times gonna be hard for AMD, is more than likely that the FX-57 (0.09m) don't work bellow -65º C.. :mad:
Yesterday I've been testing my SanDiego 4000+ at Ricky's cascade when the temperature drop belllow -65ºC the CPU simple stop overclocking ..that was really bad .. :(
I think it is time to me to get one Dothan, fortunately I did not sell my P4C800-E and the Ricky's cascade is really out of this world now with the new 1st stage ..even with the SD at near 2.0v (to try to produce more heat) the evap never ever rise above -95ºC ..so I can expect near -100ºC all time load temps with the Dothan :D
edit: Nice score with your Dothan! :toast:
I should get a Pentium M CPU this week and I already have Asus P4C800-E, Asus CT-479 and ATI Radeon X850 XT PE (AGP) waiting here in my office. I'll be doing some Dothan testing later this month.
Great work Kingpin, its been a while :toast:
I like the sounds that you really believe there is more to come from your setup :D
However looks like Sampa might be on your tail pretty soon though ;)
Me wonders if OPP will ever get a Dothan :D:D:D
Godd job an grats on the great score :D
I have a x800XTPE and a p4c800 her just waiting for a Dothan too put it under my -120c 3 stager :) But too catch you is not going too be easy but i sure wil try :)
Great Job k|ngp|n! :toast:
Thats what we were waiting for - Intel and Dothan on top of 2001 :D
And like you said there is quite a bit of room for improvement (FSB, nature score etc).
Good luck for the upcoming ln2 sessions.
Its funny to see that the board that was first to hit 26k might very well be the first to hit 46k too :D and 26k required over 4GHz CPU speed (w/ Northwood) =)
Well I wouldn't bet on that. Last time I ran 3DMark2001 SE with Kamu was almost 3 years ago:Quote:
Originally Posted by Bennah
http://service.futuremark.com/compare?2k1=4532128
I've no idea what are best drivers/OS/DirectX for X850 XT PE or no clue what is Ricky and Pedro tweak. Lets see if I figure them out :D
Great work my Friend :toast:
Some hard arse bench sessions paying off.
Here's a compare to my ATI score.
OPP
http://www.xtremesystems.org/forums/...id=32406&stc=1
Another one added to the list gunning for the top :DQuote:
Originally Posted by Overklokk
You certainly have the skills and cooling for it sir :cool:
hehehehehehe.....
Dothan POWA'
:woot: :woot: :woot: :woot: :woot: :woot: :woot: :woot:
:woot: :woot: :woot: :woot: :woot: :woot: :woot: :woot:
:woot: :woot: :woot: :woot: :woot: :woot: :woot: :woot:
:woot: :woot: :woot: :woot: :woot: :woot: :woot: :woot:
C
hehehe, call round macci, Im sure he can point you in the right direction :p:Quote:
Originally Posted by Sampsa
3D 01 Team Finland effort :toast:
So, now what AMD benchers would need is a FX-57 that will do 3.7-3.8GHz on Dry Ice. That, coupled with vc clocks in 850/700 area take back what it lost in single GPU area on the ORB :D
If you ask me, it's going to be tough case to break... ;)
Amazing score. These Dothan cores seem to be really good for benchmarking.
Now that would be just insane...
Dothan + 955X + DDR2 + X850 XT PE = OH MY LORD :slobber:
No insane would be amr or sli with Dothan and the rest of it. :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber:
Quote:
Originally Posted by fatfreepork
good god, sick Dothan score! Is that the new 2mb cache Dothans? Could explain why they are as good as athlon fx clock for clock! I compared with Oppainter's 43.7k fx55 score and hes ahead in some tests, behind others especially CL and LL and by quite a bit too! :confused: That is a very good car low you got there kingpin! Way better than Oppainter's run!
"Though I was looking, and that 329.3fps Nature with 837/694 X850 clocks kinda sucks"
yea x850 is slower than x800 but the extra nature of x800 would only add maybe 200-300 marks more
"Try WinXP SP2. Also use the MPS Uniprocessor instead "
winxp sucks! multi apic really helped my score too!
"46k possible now I'm thinking.....8 days and counting to make it happen."
O M G!!!!!!!! :slobber: :slobber: :slobber: Youd take out Oppainter and everyone else by 1000s of marks! This is on ONE gpu too, right? :slobber:
"soon you can call youreself a legend"
He already is my 3dmark hero :) :woot:
"The next times gonna be hard for AMD, is more than likely that the FX-57 (0.09m) don't work bellow -65º C.."
How cold can Dothan get? Is there a good desktop mobo for Dothan capable of high fsb? Also if Dothan is locked youll be stuck at that multiplier and high fsb will be much harder :( also we dont know how well the fx57 will do, maybe itll be better as in very high clocks? :cool:
"50K should be enough to stop them off"
LOL I dont know if ill faint or need a boat for all the :slobber: ill be doing! 50k is very, very big! Thats more than 5k higher than the top score today! May take 4GHz or darn near that on the Dothan to pull it off, either that or the upcomming r520 and g70 is a possibility due to massive nature.
:slobber: :slobber: This is gonna get very interesting...and lol its not every day you see OPP comparing to score that's higher than his...:toast:Quote:
Originally Posted by k|ngp|n
This is an insane thread. Theres at least about 5-6 guys here going to go out and buy a dothan,, LN2, the adapter, and everything else. Soon, you guys will be going for 50k. This is going to be an insane summer (or winter, depending on where u are from). BTW, nice job Kingpin.
Just WOW... ! :D
Wow, nice work Kingpin!
That dothan is just monsterous! :eek: :slobber:
Wow, nice score. Excellent work.
And you know the scary thing??
kingpin's CPU is only a "decent" clocker... TAM and memesama have 3900mHz stable at superPi 1M...
so for a moment imagine kingpin @ 3750mHz!!!
C
GF,Quote:
Originally Posted by Geforce4ti4200
you're about 2 weeks too late, lol...
You still so high on the FX??
And the P4C800 is good up to 300mHz++
Any more questions?
Oh and btw, the "new" 2M Dothan was last year's news... this new Dothan is "improved"
C
3900mhz SPi 1M? Where Charlie where? :fact:
We need to all pitch together and get Vince one of those :D
Holy Jesus, 3900Mhz SPi 1M :slobber:
Give this chip to k|ngp|n.
http://www.xtremesystems.org/forums/...771#post890771
my bad... CPUMark stable, not SuperPi...
3901mHz...
Looks like the Dothan clocks HIGHER than FX55 AND packs more punch per mHz!!
C
yea, the dothans are just amazing. And think, theres probably at least a hundred or so in notebooks that have sooo much potential, but are just running their stock 1400mhz. :(
Congratulations, k|ngp|n. :toast: I had a gut-feeling you'd be pushing competition to the next level with that Dothan. ;)
exelent, i love that score :)
well done m8
and... can't wait to finish the :banana::banana::banana::banana:ing damm scool and start benching again :)
Quote:
Originally Posted by moddolicous
i have one :) its at 1800mhz and amazes me, the fan wont be always on with 25ºC ambient with f@h 24/7 this cpus are really good at stock, the nicer part is that almost any one can buy one and because of the low price (not the same in fx series).
go get some more ln2 awsome runs, try a x800pe and all the tweaks and you might get 48k-49k
"Oh and btw, the "new" 2M Dothan was last year's news... this new Dothan is "improved""
explains why all of a sudden we are seeing great performance! Last year Dothan wasnt much but now its da bomb! What did they change? Ondie controller? Dual channel with bh5? low latency cache? High fsb mobos? This is very exciting to be seeing new records broken after a few months stangant. I still have hope for the fx57 though, its stock speed is 2.8GHz :D
Asus made an adaptor for Dothan to be used on s478 mobo's (think P4C800). ;)Quote:
Originally Posted by Geforce4ti4200
He.he,he.........WAY TO GO M8.......... :toast: :D
I'm almost ready to join the Dothan team....... ;)
My partner here at work just bought me one as a GIFT........ :D
I've built him a computer for a Radio Station - playing music - (Pentium 4 of caurse :D ) and he bought me this....... :)
http://www.thelab.gr/images/Hipro5/Temp/PM2.jpg
I have a HEAVY full modded ASUS P4P800-SE stand by, plus a P4C800-E too........and I'm waiting for the adaptor CT-479....... :(
Way to go Kingpin
If this trend starts it will sure hurt FX 55 reputation as being the best.
I cant believe you passed Opp and took the single card record. :toast:
Fricken nuts...this really makes me want to switch.....just for fun.....almost. :p:
Count me in as another dothan fan. Have a buddies 730 533fsb sitting here. We messed around w/ some Dry ICE on it. And started getting it stable in the low 3.0 - 3.2 ghz range.
P4c the ct479 thing and p4p800s bios flash. No mods, no windows tweaks. And it was pretty damn fast.
Had i think poor contact on the face of our tube. I dropped it off yesterday at a machine shop to get it faced off for another run.
Awsome job Kingpin. Looking forward to your next run with LN2. After reading alle the posts here on XS about the Dothan, I converted back to the Dark Side myself a couple of weeks ago. I went from a 2.7GHz Venice to a 2.8GHz Dothan, and ain't going back :D The funniest thing is when I made the switch, I also ended up with alot of change. Oh well, can always use it on beer's :toast2:
Hey, let me put a downer on things as people are getting far too carried away and hysterical over Dothan, everyone will be buying Rubiks cubes, CB radios and ipods before you know it :) ....
I'm sorry, but in regards to 3d benching I do not rate Dothan at all, there is a saying too little, too late but in the case of Dothan it is too much, far far too late. Unless anyone knows of an SLi Asus 865/875 motherboard or that nvidia and Ati are going to cancel r520 or G70 ;)
Dothan will be the biggest flash in the pan there has ever been, I'm afraid, in regards to 3dmark, not becuse of itself but because it has a motherboard so old it is made of wood and bronze.
However,it is a good pointer to the future for Intel, but it will be sometime yet I think before the FX platform is threatened. At present it is better suited to running superpi.
I'm pretty sure k|ingp|n can grab 2001 though as a first and last hurragh for the chip ..good luck.
Regards
Andy
Thanx for all the congratz and kind words everyone....Gonna take another stab at the #1 01' score hopefully late tonight after work with the x850.
Also can't wait to see what some of you guys can do with these chips in 01'. They really are amazing, especially for the price.
I dont think that anyone said that the 770 is cheap. There is also very little sense in getting one if price is important.Quote:
ps a 770 costs 752$--->you call this cheap?
check the price for 750 (which is the chip used for the records in this thread) OR even better 730 (which is a nice little chip too :D).
Looks like Kingpin is using a 760 from his pics.Quote:
Originally Posted by macci
Ah good point :D
Yeah 730 is perfect for any NORMAL people. Cheap and fast. 12x multi will hit an FSB wall with ln2 though.Quote:
Originally Posted by macci
Can't at least some of the P4C800's run 300+? That would get ya 3600 right there.Quote:
Originally Posted by afireinside
well obviously it doesnt' come w/ 'celeron level' price tag but then again the price ain't bad if you consider that it gives basically FX55-level performance (and in some cases even beats it) PLUS the low heat output makes it ideal for silent rigs too (Dothan TDP is around 27W vs. FX55 104W <- dont quote me on these values but there close to reality).Quote:
oh well some have a different view on the word cheap...
yes dothan is definetely the chip for the connessiuer .. conaseur .. connissear .. conness, oh bugger ...
http://www.m-w.com/cgi-bin/dictionar...seur&x=22&y=13
1 : EXPERT; especially : one who understands the details, technique, or principles of an art and is competent to act as a critical judge
2 : one who enjoys with discrimination and appreciation of subtleties <a connoisseur of fine cpu's>
That really does sum up the top overclockers.
Overclocking connoisseurs.
Good luck K|ingp|n .
Regards
Andy
this 770 must be a killer.A perfect gift you received,my mfriend :toast:
Ill trade my 0441 EMPW for it anytime,and i got it to 3200MHz on AIR :)
Quote:
Originally Posted by hipro5
Easy answer. Intel "can't" throw the Pentium 4 architecture overboard. They have WAY too much invested. They can't go to DELL and tell them they replaced the P4 right now. Look at INTEL economics, they're doing GREAT! It's ALL about politics. They should have made 2.2ghz, 2.4gHz and 2.6gHz 200fsb 64bit variants of the Dothan on LGA775 for desktop use to compete with A64.Quote:
Originally Posted by Troman
C
They have this entire "infrastructure" set up for the P4... and the money just wasn't "there" to switch over to a faster CPU. If they could "milk" the P4 a BIIITTTT longer, they'd have better profits for the shareholders. Just think, if they replace the P4 with Dothan, there's issues with lack of HT and 64bit support. If they add another line of desktop CPU's like Dothan on LGA775 at 2.4, 2.6gHz... they kill their own P4 line...
POLITICS!
C
Thats why I stay away from Intel and thats why amd remains the cpu of choice(nevermind those noobs with Dells)for almost everything, especially gaming. Dothan is a fine cpu but not ready for prime time and its nitch is limited such as good for 3dmark and all but for games and 64 bit, its a64 :) anyway hows your score comming out guys? anyone else break at least 40k?
Had a rough night benching...well sort of.
Started off with some pi and I managed to get the cpu stable at almost 3565mhz for benching pi, so I said :banana::banana::banana::banana: it, Im going for it and threw my x850 on and dropped the temps on the card quick. Never even got one 01' run off, as I lost my win2k HD for benching 01'. So went to backup plan and switched over to xp drive for some 03' and 05' benching, and here is what I managed to get before the board shut down due to MASSIVE condensation:
http://pic8.picturetrail.com/VOL256/.../100670763.jpg
http://pic8.picturetrail.com/VOL256/.../100670770.jpg
If I had been only able to run 01' at these clock speeds.......so close.
OMG...weeeeeee very very nice
|
|
|
Whoa.
|
|
|
Gonna loose sleep tonight over this one for sure....not even sure if this board will work again :P
:worship:
03 single card record back to ATi!
Hate to sound like a broken record, but why not bench 01 in winxp?
Not for long with new gpu's coming :)Quote:
Originally Posted by Gautam
I never bench 01' in xp....heheh
2k is faster for 01 ;)
That sucks about the board. You already killed one right? What are you doing for insulation? Have you tried lots of foam and seran wrap? Its messy as hell and ugly but it should work :p:
It will prolly be ok after it dries out, they usually are. It just wouldn't run after a certain point(I run the dothan on full tilt now with container always 1/4 full -184c evap temps can make for a really ice situation. These chips don't put out much heat.) The one that died wasn't prepared at all. I got lazy there and was pushing my luck.Quote:
Originally Posted by afireinside
USUALLY... I had my old DFI LP UT sit in a huge puddle for 2 hours while I kept trying to turn it on and it worked fine 2 days later, than it just died after a bit of melted ice from my dry ice tube base got under some caps :(
I hope your board is ok though, P4C's arn't cheap.
Quote:
Originally Posted by Gautam
I was thinking the same but he must know that winxp is slower so therefore a waste of time to bench on anything less than the best os, win2k being it.
I hope your mobo is all right, we are all excited to see some 46k action :slobber:
GF,
FWIW, Dothan IS the stronger gaming CPU... macci showed that with a DOOM3 time demo that crushed an FX55.
The AMD defenders are starting to sound like the Intel defenders of "last year". lol...
"Well, the Pentium 4 has the edge in encoding" (and we all said "who cares")
"Don't forget HyperThreading" (lol, my A64 doesn't have probs multitasking)
"It's simply a more refined platform" (hehehehe)
"Third party chipsets ALWAYS suck" (yeah, right.. uh huh!)
"Who's going to notice 10 or 20 fps?? anyway" (rofl)
C
i was expecting 01 benches, hope you can bench soon with win2k
I'd like a dothan, but i'll still take A64 since it does 64bit and i'm too poor to own 5 killer top end systems :P
Are you speaking from personal experience?Quote:
Originally Posted by Geforce4ti4200
Geforce, you are certainly entitled to your opinion but as already stated in this thread, your statement smacks of fanboyism.....
Why are you so threatened by Dothan/Sonoma??
Have you been out in your shed everytime Fugger has spoken about the upcoming Socket 480 platform? It will be a REAL Dothan platform, and i can hardly imagine they'll make it AGP :)Quote:
Originally Posted by zakelwe
And to GF4:
Please, read around the forums! You totally disregard results as well as benchmarks.
When comparing X800XTPE to 6800U, your terminology has always been like "X800XTPE owns 6800U by 4FPS!!! :slobber:", and now, when the Dothans completely rules SuperPI, is a strong 3DMark competitor and is a really strong choice when it comes to silent rigs, you're not really sure if that is a lead at all.. :D
Very cool score kingpin! Why is the core clock so much slower in 03? :confused: Artifacts or runnin low on LN2?
Thanx...03' usually is a bit harder on the card/cpu than 05'. I spent most of my time benching 05', and gave the card/cpu just enough to take 03' single card WR. Going for 20k+ will need 875+ on the core most likely. I want the single card "Quad-fecta" in all four benchmarks :P.(01,03,05,am3), and won't stop till I get it, or hardware all vaporizes lol. Am3 and 01' scores could end up being #1 overall. 3 down, 1 to go.
The darkside is becoming more powerful every day :shock:
http://pic8.picturetrail.com/VOL256/.../100697144.jpg
http://pic8.picturetrail.com/VOL256/.../100670770.jpg
http://pic8.picturetrail.com/VOL256/.../100697400.jpg
http://pic8.picturetrail.com/VOL256/.../100670763.jpg
Macci's 9500 05' score with crossfire card, and OPP's 44.8k sli score in 01' are a near impossible challenge to begin with...I'm up to it though, and so is the dothan.
wasn't the 9500 run with only one card though?Quote:
Originally Posted by k|ngp|n
the single card run is with normal PCIe X850XTPE, running on ATI Radeon Xpress200 CrossFire Edition board. And your getting awfully close there already with the Dothan power - 147Marks to go :DQuote:
Macci's 9500 05' score with crossfire card
Congrats on the single card records so far. Its been fun to watch. :)
But yes there is one more to go :D
Is'nt that for Yonah and is only single channel memory ?Quote:
Originally Posted by Mathias-K
Even if it is double channel and for Dothan I would guess it is an intel chipset and thus no SLi or AMR so therefore not #1 in 3dmark2001, 03 or 05.
Regards
Andy
Gotcha....was just wondering I know I had my non-PE up to 855 for 03 on DI. I was just wondering if you had walled.(Guess not since you're talkin about runnin 875 :) ) Now that my card is dead think I am gonna grab a PE for the crossfire and work on grabbin a dewar. It's just amazing what you're doing w/ that Dothan. GL w/ the "quad" :toast:Quote:
Thanx...03' usually is a bit harder on the card/cpu than 05'.
Yes of course, it will be Yonah - my bad, i wrote Dothan when i meant Pentium-M :) Single channel?! I haven't heard that, but that would seem like endless stupidity! :confused:Quote:
Originally Posted by zakelwe
If/when Pentium-M becomes recognised as a "real" desktop platform, what would stop nVidia/ATi from making s480 counterparts to their 939/775-compatible series?
EDIT:
K|ngp|n - You're becoming a star, man! :clap:
Macci - You're becoming a lazy observer like me :slapass: ;)
Maybe Intel if they still had more expensive and less powerful chips to sell ? :DQuote:
Originally Posted by Mathias-K
Regards
Andy
Yeah, you're prolly right, but perhaps this SLI/CF-madness can draw the two candidates into consideration :)Quote:
Originally Posted by zakelwe
who knows but hes aiming for 46k :drool:
Everything is fine. Just cant find the time to bench atm with work :(Quote:
Originally Posted by Troman
Should have something by the weekend, might be too late then.
I'll bench for u, and u get the credit, hows that work?? :woot:
Benches can wait for work, but make sure u do them soon.
Been working on getting 2 sticks bh-5 stable at 270+ on p4c800-e and a few mobos and 8 sticks later, I finally got it. Board seems to love this ram. LOL, I though these sticks were junk, because I could never get them to clock decent at all on any a64 board I tried them on.....guess not.
2x256 buffallo tech. 3200 bh-5
p4c800-e 1.8v agp/3.5vdimm
http://pic8.picturetrail.com/VOL256/.../100957037.jpg
Cpu can do well over 3500 mhz benchable for 3d now, so it's starting to look real good for some 272-275x13 3d action this weekend.
dont worry, your job comes first, you need the money for your "toys" to break 46k or something. The weekend is upon us and we all are as excited as you :slobber:
You said it bro...I can't wait to see some updates here.Quote:
Originally Posted by Geforce4ti4200
Jobs sure do come first...$hit...I'm gonna be starting on a new case project that by the end of it I might end up dropping a few hundred bux on case fans and ccfl's alone. ;)
more good stuff, kingpin...
Are those BH5 single sided?? I assume so.
Oh, btw... to illustrate the power of Dothan FURTHER... yesterday I was playing with x800xl agp and running LobbyLow at 3000mHz, I saw peak FPS of 940...
C
I seem to remember somebody saying once that 3dmark tops out at 999fps?? Is that true? Or does it go into 4-digits?Quote:
Originally Posted by charlie