Originally Posted by
Fr3ak
I am testing this board right now. Voltage damper exists in the bios, but does not work at all. Same vdroop with it being enabled and disabled.
Vdroop is driving me crazy. 1.4875V set in bios results in 1.448V idle and 1.4V under load...
It seems to clock DDR2 quite good, but I haven't tested these GMH in another board, so I cannot compare their performance.
I can boot into Windows and run 32M with 450MHz, but 32M stable is just 420MHz, no matter what FSB or chipset voltage I set. 420 seems to be rockstable with all voltages to the lowest possible.
I am using a E6750ES for the record.
I am not allowed to do any mods on the board, so I cannot vdroop-mod the board :/
If I have the time, I will make some DDR3 tests when I am done with DDR2.