Showing Visitor Messages 1 to 2 of 2
-
-
Mother Board ( EVGA X58 Classified E-760 )
Drivers ( )
Bios ( S61J )
CPU ( 920 D0 )
CPU Cooler ( Swiftech Apogee XT )
Memory ( Corsair Dominator GT 2000 9-9-9-24 1T )
PSU ( Corsair HX1000W )
GPU ( GTX295 )
Drivers ( 190.56 )
Operating System ( Windows 7 64 )
Frequency Control
CPU Clock Ratio ( 2021 )
CPU Host Frequency (Mhz) ( 216 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3447,5 )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 105 ) Do not go above 100 with SSDs <---just read this, why is this
Memory Feature
Memory Speed ( standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 646 / 2:6 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 74 )
Command Rate ( 1t )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.28 )
CPU VTT Voltage ( +100 )
CPU PLL VCore ( 1.650 )
IOH PLL VCore ( 1.800 )
DIMM Voltage ( 1.50 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.20 )
IOH VCore ( 1.10 )
IOH/ICH I/O Voltage ( 1.50 )
ICH VCore ( 1.12500 )
VTT PWM Frequency ( 250 KHZ )
CPU PWM Frequency ( 800 KHZ )
CPU Impedance ( auto )
QPI Signal Compensation ( auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( disabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Disabled )
PnP/PCI PCI Express
Maximum Payload Size ( 256 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
