First sharing: RAM DDR3 D9GTR; 2.4v good for 24/7, with fan - 2.75v good for short time benching. CPU Quadcore 45nm Unlimited vcore (2.1v+), 1.575v vTT, 1,6v vPLL Dualcore 45nm Unlimited vcore (2.1v+), 1,625v vTT, 1.7v vPLL
GPU 8400GS vGPU 24/7 air: 1.7ish. Survived 3.0v on water. Still running. CPU s462 (All) vcore air 2.15v 24/7 (2+ years runtime).
8400GS during dutch contest: max on water: 2.35v, died. Trying to revive using crazy solutions like hooking a 5v line from a PSU directly to the GPU. Enormous droop 5v line, Idle 3.0v, load 1.7v Doing this the typical black XFX pcb paint burned off the pb and a copper trace sprang out. After some repairs the card still worked with an external psu. Abit AB9-PRO P965: Northbridge voltage 2.55v during one and a halve 3dmark06 runs. Why? The board didn't had pll or vtt voltage to adjust, but Vnb seemed to even scale above 2v. Intel E6600 L627 Daily: 3.8ghz 1.62v stable Max bench: A bit above 2.4v for maybe 20sec (testing my weak phase-change). HD3850 256mb Max bench: 1.88v (limited because of ovp/ocp) Daily: 1.6v (for 2 months now)