View Full Version : Anybody now Macci's Voltage??
OPPAINTER
06-11-2002, 03:40 PM
Does anybody know off hand what core voltage Macci runs his 1.6 chip at??
Thanks,
OPP
Raptor
06-11-2002, 03:45 PM
I think it was 1.8v... i guess... at least i remember he didn't made any Vcore mod in the P4T-e, only Vrimm, so, he's using the NW pins, and i guess it's 1.8v...
OPPAINTER
06-11-2002, 03:57 PM
Wow, 1.8 is low, he must have some great cooling. well I know he has Great Cooling:D but thats incredible, must be one hella chip.
I want to try one.
OPP
Raptor
06-11-2002, 04:03 PM
it is a great cpu...
But there's one thing that you need to know, is that the limiting factor in the NW cpu's is not temperature or voltage, but the motherboard it self!!!
For example, his NW is exactly the same, with the exact same voltage and exact same cooling!!!
So, why did he won about +100MHz overclock over the TH7-2... you don't need extra voltage, because it's the board that's limiting the cpu Overclock... and probably the same is hapening right now with the P4T-E, since DJ told me that the Iwill i850E is great because it's, until know, the board that makes his NW go more than 3.3GHz, and in the P4T-E and TH7-2, they couln'd pass over 3.150!!!
OPPAINTER
06-11-2002, 04:30 PM
Wow,
I wonder if the BD7II is holding back the 2.26 chip I have.
OPP
Raptor
06-11-2002, 04:33 PM
Maybe... ;)
Dr. GoodenHigh
06-12-2002, 06:17 AM
he uses 1.9+ for over 3100
DDTUNG
06-12-2002, 06:33 AM
Hey Doc, good to see you here.
How's the dark side?:) :D
Just kidding.
Glad you came by.
DDTUNG:cool:
JCviggen
06-12-2002, 06:46 AM
Originally posted by OPPAINTER
Wow,
I wonder if the BD7II is holding back the 2.26 chip I have.
OPP
I dont think so, the BD7 is a very very good overclocker... the TH7-II however is one of the worst boards around when it comes to CPU overclocking. I tested the Abit IT7 and it allowed me to load Windows at 3300 MHz, while on the TH7-II I have trouble with 3200. I could do 3255 stable, on the TH7 i'm limited to 3160. The TH7 is a LOT faster in 3Dmark than that IT7 though. The IT7 only has an option to run your memory at 3/4 your FSB, not 4/3... go figure
the biggest problem is that most RDRAM boards max out around 150 FSB because of the PLL they use. And if they use a PLL that wouldnt mind 200, then you can bet they strapped on some DRCG's that arent worth :banana::banana::banana::banana:. Abit better hurry with the sucessor for the TH7 :(
macci
06-12-2002, 01:14 PM
I've done the Vcore mod too and Its at 1.86-1.88V under full load at 3.2G. Haven't tested higher yet :D
Dr. GoodenHigh
06-12-2002, 01:23 PM
my bad, I thought i remebered you saying 1.9 a while back.
Originally posted by macci
I've done the Vcore mod too and Its at 1.86-1.88V under full load at 3.2G. Haven't tested higher yet :D
Dr. GoodenHigh
06-12-2002, 01:25 PM
Tanks buddy!
I'm sure you'll see me around here quite a bit.
Originally posted by DDTUNG
Hey Doc, good to see you here.
How's the dark side?:) :D
Just kidding.
Glad you came by.
DDTUNG:cool:
CSHawkeye81
06-12-2002, 08:12 PM
this dude thought me and jc were bluffing that we got our 1.6a's over 170 fsb.
Dr. GoodenHigh
06-12-2002, 08:30 PM
who did?
Originally posted by CSHawkeye81
this dude thought me and jc were bluffing that we got our 1.6a's over 170 fsb.
OPPAINTER
06-12-2002, 08:34 PM
Dr. good to see ya :)
Glad you made by:D
OPP
CSHawkeye81
06-12-2002, 08:45 PM
his name was MospeadasDark
and he said that it was highly unlikely anyone would hit 170 fsb.
OPPAINTER
06-12-2002, 09:05 PM
Hawkeye,
Is that you from Icronics?? How you Been??
OPP:)
CSHawkeye81
06-12-2002, 09:14 PM
yeah but you all dont like me so i am gonna be on and off as i am posting this as i am at work at the pentagon, called back to do a overhaul on some servers there. also i heard what happend at icrontic as i wont go there no more cause of that.
Raptor
06-13-2002, 03:48 AM
Originally posted by macci
I've done the Vcore mod too and Its at 1.86-1.88V under full load at 3.2G. Haven't tested higher yet :D
Told'ya! :D
calantak
06-13-2002, 10:28 AM
Originally posted by CSHawkeye81
yeah but you all dont like me so i am gonna be on and off as i am posting this as i am at work at the pentagon, called back to do a overhaul on some servers there. also i heard what happend at icrontic as i wont go there no more cause of that.
what's happened at icrontic?
CSHawkeye81
06-13-2002, 10:40 AM
its between me and some other guys here.
ZhaoYun
06-13-2002, 01:26 PM
Originally posted by CSHawkeye81
its between me and some other guys here.
I read about it a while back, I hope it gets resolved soon. :)
Friar Tuck
06-13-2002, 05:31 PM
Originally posted by Dr. GoodenHigh
Tanks buddy!
I'm sure you'll see me around here quite a bit.
Geez...every man and his damn dog on these forums now..:p
G'day mates...:)
FT.
Silversink
06-13-2002, 08:49 PM
Originally posted by macci
I've done the Vcore mod too and Its at 1.86-1.88V under full load at 3.2G. Haven't tested higher yet :D
Hey Macci,
Glad to see you around my friend ;)
Sam
w1per
06-15-2002, 02:23 PM
Originally posted by macci
I've done the Vcore mod too and Its at 1.86-1.88V under full load at 3.2G. Haven't tested higher yet :D
Cant you make a big thread writing everything about your latest rigs, at www.muropaketti.com (Finland) there was some pics earlier :)
At last a fan pic :D
http://www.solidhardware.com/macci/stuff/macci.jpg