sempron % 50 overclocked [Archive] - XtremeSystems Forums

concorde_rs

05-06-2006, 10:40 AM

my system

asus k8n
sempron 2600 @ 2.4 ghz...default V core
512 mb oem ddr 400 @ 480 mhz :)

my mainboard can not allow to increase fsb after 300 fsb :( what can i do ? any suggection :)

that is 1 M

http://img70.imageshack.us/img70/3959/overclock84us.jpg

that is 4 M

http://img70.imageshack.us/img70/1931/overclock98pj.jpg

TaPaKaH

05-06-2006, 10:44 AM

what can i do ? any suggection Raise CPU Vcore or HTT voltage

concorde_rs

05-06-2006, 10:54 AM

doesnt ll be change...because my mainboard can not allow after 300 fsb :slapass: :slapass:

[XC]melymel

05-06-2006, 11:01 AM

Have you tried searching for newer/beta bios' that allow higher fsb selection?

Nice O'C' BTW, 2600 sempies are great little chips especially for o'c'ing :D

:toast:

concorde_rs

05-06-2006, 11:05 AM

thanks :) i didnt try to search...but i think cpu ll want extra V after that point... also what can i say know...i think know my system equal athlon 3000 default...or how much in intel ? :toast:

concorde_rs

05-06-2006, 11:12 AM

which one is better for my ram :) i love it too much

200 mhz 2- 3 - 3 - 7 or;
240 mhz 2.5 - 4 - 4 - 8

http://img517.imageshack.us/img517/4382/overclock112cy.jpg

[XC]melymel

05-06-2006, 11:16 AM

From the screenies of your Spi 1m you have posted, 240mhz 2.5-4-4-8 as it got you a lower time ;).

:toast:

Fr3ak

05-06-2006, 11:20 AM

Personally I'd go with tigther timings.
What mainboard are you using? My tforce can do 381mhz htt and its not even expensive..

concorde_rs

05-06-2006, 11:53 AM

@ melymel2789 i think so :toast:

@Fr3ak asus k8n ...tforce is biostar ?

@_damien_ man ur system is great... if i can increse my fsb may i could do it :slapass: :slapass: but also ur rams perfect:clap:

TaPaKaH

05-06-2006, 10:25 PM

to concorde_rs
If you can`t set more than 300MHz HTT in BIOS - use ClockGen.

kiwi

05-07-2006, 02:20 AM

Here is my sempron, just quick test, mb is tforce 6100 which is one of the best s754 boards for oc

http://www.xtremesystems.org/forums/attachment.php?attachmentid=46923&stc=1&d=1146997191

Okanoa

05-07-2006, 03:06 AM

http://okanoa.free.fr/FTP/Overclocking/Mes_OC/Pure_overclocking/screen_cpu-2734.jpg (http://okanoa.free.fr/FTP/Overclocking/Mes_OC/Pure_overclocking/screen_cpu-2734.jpg)

71% o/c @ ~0°c with 1,65V

Super PI 1M: 36.891s

http://okanoa.free.fr/FTP/Overclocking/Mes_OC/Record_Benchmark/record_superPI.jpg

My scores: http://okanoa.free.fr/overclocking.htm

concorde_rs

05-07-2006, 05:55 AM

@TaPaKaH yes but i going to set up it agian after restart :S
@kiwi dont worry...if i gave 1.66 V it ll be better ...show me default V pls

FutureOfTheKing

05-19-2006, 03:44 AM

i think they are right you should try to update your bios

concorde_rs

05-24-2006, 02:42 AM

i think they are right you should try to update your bios

thank u for suggestion :toast:

kenkerkutiv

05-30-2006, 02:50 PM

Hi to all
First sorry for my english, im a chilean boy (southamerica)
Second, I have this board, the most recent bios is 1011 and this bios cant change de vcore or chipset voltage, only vdimm .. (its suucks!) you have 2 posibilities 1.- Change de MOBO or Make a Pinmod Read THIS PAGE!!, to make a Pinmod (http://www.ocinside.de/go_e.html?http://www.ocinside.de/html/workshop/s754pinmod/amd_socket754_pinmod.html)
respect to HTT Check this alternative Bios (http://www.ocworkbench.com/ocwb/ultimatebb.php?/topic/44/71/11.html) with this bios you can put de HTT in 380 :O (niiice)

Reggarts from Chile! (http://upload.wikimedia.org/wikipedia/commons/thumb/8/85/Karte_chile_verwaltungsgliederung.png/330px-Karte_chile_verwaltungsgliederung.png)

korndog412

06-18-2006, 09:53 AM

@Okanoa, quite a difference in spi:

my 2800+ in action (bout. 1.55v), cooling is a plain venus12, mobo: MSI k8n neo-fsr v2.0

http://img244.imageshack.us/img244/6250/36500s2xg.png

farksy

06-18-2006, 09:59 AM

Nice on stock voltages ! Well clockgen is your answer. Or a better board. As they recommended, Biostar Tforce doesn't sound too bad ....

_zzzkuba

06-19-2006, 09:25 AM

hi !

here my results

sempron64 2800
super PI 16M
http://img352.imageshack.us/my.php?image=12539ok4iu.jpg

cpu-z validation
http://valid.x86-secret.com/show_oc?id=82662

heikis

07-01-2006, 11:19 AM

my results (don't have the same platform anymore to break under 30sec)

AMD Sempron64 2800+ 1600MHz @ 2904MHz 1,8V 81,5% OC
Spi 1M:
http://img137.imageshack.us/my.php?image=309858bg.png

wish i had some better sticks of ram to break under 30sec. eventhough it was good experience :D

and was 3dmark2001 stable:
http://img484.imageshack.us/img484/4668/21707016jz.th.png (http://img484.imageshack.us/my.php?image=21707016jz.png)

results were made on the following rig:
AMD Sempron64 2800+ Palermo (daily 2,4GHz @ def voltagel)
DFI Lanparty UT 250Gb
Gainward GF 6600GT
Adata 512mb PC4000 ram
Nexus NX-3500 350W

concorde_rs

07-08-2006, 02:40 PM

N00B

07-08-2006, 02:44 PM

Talking about sempr0n here's my score.

I got some hyperX but i guess it's not Bh5 its CH5 :( , i have a 256 Ocz module that is Bh5.
For Pi its better 2*256 ch5 or 1*256 bh5?

http://img207.imageshack.us/img207/6294/superpi355s9pu.jpg

Heikis, you did the 1,7v on air??

Lol i'm affraid of killing my sempy ,with +1,6v on air , i have a Arctic Cooling Freezer 64 Pro.

Does any one know the "hotspots" of this Dfi , have 2 "coolers"(i dont know how the name in english) to put on the mobo but i dont know where!

heikis

08-10-2006, 11:01 PM

I did the benchies on my balcony at maybe 5´C. I didnt dare to go over 1,8V. maybe I could hit 3GHz at 1,9V but felt it was too risky to push more.
with some decent memory I may have hit under 30sec.

tomos

08-11-2006, 12:43 AM

here's mine 2500+ @ 2701MHz, that's 93% o/c :cool:
the voltage is a bit too high there.
cooling: ac freezer 64pro

and the spi 1m:
http://img317.imageshack.us/img317/5070/1m2701mhz334849hc.th.jpg (http://img317.imageshack.us/my.php?image=1m2701mhz334849hc.jpg)

dippyskoodlez

08-14-2006, 11:01 AM

http://img.techpowerup.org/060814/Picture-007.jpg

Gay MSI k9N Neo. 300htt max in bios, stock voltage, stock cooler

ozzimark

08-14-2006, 11:12 AM

Gay MSI k9N Neo. 300htt max in bios
i like mine... :woot:

http://valid.x86-secret.com/show_oc.php?id=97566

http://valid.x86-secret.com/show_oc?id=97360

concorde_rs

08-15-2006, 10:13 AM

:slapass: :slapass: be quite ...my new toys :slap:

PLS BE CARE VCORE ..İF İ CLOCK 3.5 GHZ Pİ LL BE 15 SN :wierd: İTS A JOKE
http://img109.imageshack.us/img109/6149/9ok1.jpg

mat128

08-19-2006, 04:28 PM

What's with all the semprons being as fast in 1M spi as my p4 3.6?

http://pages.infinit.net/mat128/37.547-3598-200-2.5-3-3-8.jpg

I guess with better memory i'd be beating the :banana::banana::banana::banana: out of those semprons :slapass: ;)

dippyskoodlez

08-20-2006, 01:54 PM

What's with all the semprons being as fast in 1M spi as my p4 3.6?

1.) The a64 design stomps the P4. no ifs, ands or buts.
2.) The A64 design much like the K7 isnt very reliant on cache for performance like a P4.

i like mine... :woot:

http://valid.x86-secret.com/show_oc.php?id=97566

http://valid.x86-secret.com/show_oc?id=97360

I'm assuming you are using either a modified bios, or clockgen? I used clockgen to get me up to 2600mhz, but then I'm in need of a Vmod.

concorde_rs

08-23-2006, 04:51 AM

hehe :) your p4 4ghz little bit faster than my sempron..wait wait...i ll be back with water cooler ...and sepmron ll overclock 3 ghz :) under 30 seconds

Misko

08-27-2006, 01:57 PM

i like mine... :woot:

http://valid.x86-secret.com/show_oc.php?id=97566

http://valid.x86-secret.com/show_oc?id=97360

Did u maybe mod vcore? Bios revision?

ozzimark

08-27-2006, 03:42 PM

I'm assuming you are using either a modified bios, or clockgen? I used clockgen to get me up to 2600mhz, but then I'm in need of a Vmod.
i can boot at 380mhz. it's a bios that msi gave me that i have posted somewhere around...

only vmod i've done is for vdimm. i would try to find the chipset vmod, but it already runs soooooo hot :slapass: :slapass:

fr@me

09-14-2006, 12:40 AM