Best Ram Settings for DFI RS482 bios?

[Taco1435]

Setup:
Motherboard: Dfi Infinity Rs482 http://www.newegg.com/Product/Product.asp?Item=N82E16813136007
Ram: 2 gig kit G.skill pc4000 GBHZ
CPU: Opteron 165
PSU: Enermax Liberty 500w
Video card: EVGA 7900 gt co
http://www.newegg.com/Product/Product.asp?Item=N82E16814130281

I think the motherboard is picky about ram. The RS482 works with optimized defualts loaded(everything auto), but when i try to change anything or overclock at all it has this random restart problem where it runs between anywhere from 5 minutes to an hour, and restarts with no bsod or error msg, or anything in the event manager. Except, just about an hour ago, i set the 2/1 divider to try and put the ram out of the question, and I got a "Windows has just recovered from a fatal error" that said that the problem was probably caused by my ram. Thats what made me think its a ram/mobo thing. I also ran the computer with the highest divider effectively running the ram at ddr 500 to see if the ram could handle it, and ran memtest 86 for like 8 hours no errors. So... I don't think its that I have bad ram.
---What would be the best timings/settings in bios for this mobo(DFI Infinity RS482) if I'm trying to overclock?

[killingspreez]

hey
i've got exactly the same prob with my rdx200!
but i'm using the 1024 GH (utt or bh-5?)

i couldn't fix it....even drive strength and data didn't improve the situation.
i'm very sad!

any conclusions?

mfg

[mikenam]

lower the multi to see how far your memory will go.

[GSKILL TECH]

could you take some bios screen shot, from there i can easy to give your more suggestion

[Taco1435]

Is there a way to take pictures of the bios using the computer, without a camera? I don't have one at the moment.

[GSKILL TECH]

Is there a way to take pictures of the bios using the computer, without a camera? I don't have one at the moment.
using cell phone?

can't take screen shoot in bios with pc tho

[Taco1435]

ok ill have to borrow one

[Taco1435]

Heres the bios pics
Ram Settings from top to bottom:
http://www.members.cox.net/kmegowan/ram1
http://www.members.cox.net/kmegowan/ram2
http://www.members.cox.net/kmegowan/ram6
http://www.members.cox.net/kmegowan/ram3
Other settings:
http://www.members.cox.net/kmegowan/ram5
http://www.members.cox.net/kmegowan/ram4
So can you tell me the best settings for ram if i wanted to run it 1:1 at 270 htt?
Also, does random rebooting with no blue screen sound like a ram problem? Just last night i overclocked it to 2.4 and used some of the ram settings posted on a sticky for a different dfi board and it ran prime95 for 13 hours wihtout a single error. I then exited prime95 and proceeded to post my success on this forum, when it rebooted mid sentence ( :( I nearly cried) with no bsod, freezing, error, or anything. It's like someone just pushed the reset button. Does this sound like it could be a ram issue?

O and those are the settings with optimized defaults loaded. The computer doesnt seem to restart with optimized defaults loaded for everything.
EDIT: Actually, now the computer does restart with optimized defaults loaded, but it reboots much less often than when i try to oc.

[Taco1435]

uh bump... please help

[pharmd24]

http://www.hardforum.com/showthread.php?t=1047982&highlight=rs482

This might have something to do with your problem... Might not. I think everyone is still sorting the PSU thing out. I see around the web that a new bios was released this month.... I haven't seen the specs on it tho

[Taco1435]

lol yea I've been talking in that forum. I actually posted on that thread. But I still can't get the ram past 265 running 1:1 so I any help on settings would be appriciated.